UNISONIC TECHNOLOGIES CO., LTD RS1006FL DIODE SURFACE MOUNT FAST DIODE DESCRIPTION The UTC RS1006FL is a surface mount fast diode, it uses UTC’s advanced technology to provide customers with fast switching and low reverse leakage, etc. The UTC RS1006FL is suitable for surface mounted applications. SOD-123F FEATURES * Fast switching * Low profile package * Low reverse leakage SYMBOL ORDERING INFORMATION Ordering Number RS1006FLG-CA2F-R Note: Pin Assignment: A: Anode K: Cathode Package SOD-123F Pin Assignment 1 2 K A Packing Tape Reel MARKING R6FG www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-213.C RS1006FL DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Repetitive Peak Reverse Voltage VRRM 600 V RMS Voltage VRMS 420 V DC Blocking Voltage VDC 600 V Average Forward Rectified Current Derate above TC=110°C IF(AV) 1.0 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave IFSM 30 A Superimposed on Rated Load (JEDEC Method) Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL θJA RATINGS 200 UNIT °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT 1.15 V IF=0.7A Instantaneous Forward Voltage VF IF=1.0A 1.3 V TJ=25°C 5 μA DC Reverse Current at Rated DC Blocking IR Voltage TJ=125°C 50 μA Reverse Recovery Time trr IF=0.5A, IR=1A, Irr=0.25A 250 nS Junction Capacitance CJ VR=4V, f=1MHz 9 pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-213.C RS1006FL DIODE TYPICAL CHARACTERISTICS Average Forward, IF (A) Forward Surge Current, Amperes Pk (Half-Sing Wave) Junction Capacitance, CJ (pF) Average Forward Rectified Current, IF (A) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-213.C