UNISONIC TECHNOLOGIES CO., LTD UD2195 Preliminary NPN SILICON TRANSISTOR NPN EPITAXIAL PLANAR TRANSISTOR DESCRIPTION * The UTC UD2195 is designed for use in general purpose amplifier and low speed switching application. * Pb-free package process is adopted. Lead-free: UD2195L Halogen-free: UD2195G ORDERING INFORMATION Normal UD2195-AB3-R Ordering Number Lead Free UD2195L-AB3-R Halogen Free UD2195G-AB3-R www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd Package SOT-89 Pin Assignment 1 2 3 B C E Packing Tape Reel 1 of 3 QW-R208-043.a UD2195 Preliminary NPN SILICON TRANSISTOR EQUIVALENT CIRCUIT UTC UD2195 C B 8KΩ 120Ω E B: Base C: Collector E: Emitter UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R208-043.a UD2195 Preliminary NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage SYMBOL VCBO VCEO VEBO DC Collector Current IC RATINGS 130 120 5 4 UNIT V V V RATINGS 208 UNIT ℃/W A 6 Collector Dissipation PC 0.6 W Junction Temperature TJ 150 ℃ Storage Temperature TSTG -55 ~ +150 ℃ Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Note: 1 .Absolute maximum ratings are stress ratings only and functional device operation is not implied. Note: 2. Pulse test: Pulse Width≦350μs, Duty Cycle≦2% Pulse(Note 2) THERMAL DATA PARAMETER SYMBOL θJA Junction-to-Ambient ELECTRICAL CHARACTERISTICS PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Base-Emitter Turn-On Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS DC Current Gain (Note) SYMBOL BVCBO BVCEO VBE(ON) ICBO ICEO IEBO hFE TEST CONDITIONS IC=100μA, IE=0 IC=1mA, IB=0 VCE =4V, IC=2A VCB=100V, IE=0 VCE =50V, IB=0 VEB=5V, IC=0 MIN 130 120 VCE=4V, IC=1A VCE=4V, IC=2A IC=2A, IB=2mA 1000 500 Collector-Emitter Saturation Voltage VCE(SAT) SMALL-SIGNAL CHARACTERISTICS Output Capacitance Cob VCB=10V, IE=0A, f=1MHz Note: Pulse test: Pulse Width≦380μs, Duty Cycle≦2% TYP MAX UNIT V V 2.8 1 2 2 V mA mA mA 2 V 200 pF UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R208-043.a