UNISONIC TECHNOLOGIES CO., LTD UD3018 Preliminary NPN EPITAXIAL SILICON TRANSISTOR NPN POWER BIPOLAR TRANSISTORS DESCRIPTION The UTC UD3018 is an NPN transistor. it uses UTC’s advanced technology to provide customers with high collector-emitter breakdown voltage and high frequency, etc. The UTC UD3018 is suitable for professional audio amplifiers and high-end consumer audio products, etc. FEATURES * High collector-emitter breakdown voltage * High frequency * Excellent gain linearity ORDERING INFORMATION Note: Ordering Number Lead Free Halogen Free UD3018L-T3P-T UD3018G-T3P-T Pin Assignment: B: Base C: Collector E: Emitter www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd Package TO-3P Pin Assignment 1 2 3 B C E Packing Tube 1 of 3 QW-R214-023.a UD3018 Preliminary NPN EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO 250 V Collector-Emitter Voltage VCEO 250 V Emitter-Base Voltage VEBO 5.0 V Collector-Emitter Voltage - 1.5V VCEX 250 V 15 A Continuous Collector Current IC Peak Collector Current (Note 1) 30 A Continuous Base Current IB 1.5 A Total Power Dissipation @ TC=25°C PD 150 W Operating Junction Temperature TJ -65~+150 °C Storage Temperature Range TSTG -65~+150 °C Notes: 1. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Absolute maximum ratings are those values beyond which the device could be permanently damaged. 2. Pulse Test: Pulse Width=5.0ms, Duty Cycle<10%. THERMAL CHARACTERISTICS PARAMETER SYMBOL θJC Junction-to-Case RATINGS 0.83 UNIT °C/W ELECTRICAL CHARACTERISTICS (TC =25°C unless otherwise noted) PARAMETER OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage Collector Cut-Off Current Emitter Cut-Off Current ON CHARACTERISTICS Collector-Emitter Saturation Voltage DC Current Gain Base-Emitter On Voltage DYNAMIC CHARACTERISTICS Current-Gain-Bandwidth Product Output Capacitance SYMBOL BVCEO(SUS) IC=30mA, IB=0 ICBO VCB=250V, IE=0 IEBO VEB=5.0V, IC=0 VCE(sat) hFE VBE(on) fT Cob UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IC=5.0A, IB=0.5A IC=0.5A,VCE=5.0V IC=1.0A,VCE=5.0V IC=3.0A,VCE=5.0V IC=5.0A, VCE=5.0V IC=1.0A, VCE=5.0V, ftest=1.0MHz VCB=10V, IE=0, ftest=1.0MHz MIN TYP MAX UNIT 250 10 5.0 75 75 75 V µA µA 1.0 150 150 150 1.2 V 400 MHz pF 30 V 2 of 3 QW-R214-023.a UD3018 Preliminary NPN EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R214-023.a