AZ762H 16 AMP HIGH TEMPERATURE MINIATURE POWER RELAY FEATURES • • • • • • • Ambient Temperature up to 105°C (221°F) Sensitive coil Dielectric strength 5000 Vrms Low height: 15.7 mm 16 Amp switching Isolation spacing greater than 10 mm Reinforced insulation, EN 60730-1 (VDE 0631, part 1) EN 60335-1 (VDE 0700, part 1) • UL, CUR file E44211 • VDE certificate 40006031 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) SPST (1 Form A) Ratings Resistive load: Max. switched power: (Sensitive version: Max. switched current: (Sensitive version: Max. switched voltage: * Note: Rated Load UL, CUR VDE 4000 VA 2500 VA) 16 A 10 A) 125 VDC* or 440 VAC If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. 16 A at 277 VAC resistive, 100k cycles, 105°C (standard coils) [2] 10 A at 277 VAC resistive, 100k cycles, 105°C (sensitive coils) [1] [2] 16 A at 250 VAC resistive, 50k cycles, 105°C (standard coils) [2] 10 A at 250 VAC resistive, 50k cycles, 105°C (sensitive coils) [2] 10 A at 250 VAC resistive, 30K cycles, 105°C (sensitive coils) [1] 6 A at 400 VAC resistive, 100k cycles, 105°C (sensitive coils) [1] Life Expectancy Mechanical Electrical (ohmic load at 105°C / 221°F) Minimum operations 1 x 107 1 x 105 at 16 A 250 VAC Res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 5000 Vrms coil to contact 1000 Vrms between open contacts Insulation Resistance 1000 megaohms min. at 20°C 500 VDC 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 105°C (221°F) Vibration 0.062” (1.5 mm) DA at 10-55 Hz Shock 10 g Enclosure P.B.T. polyester tinned copper alloy, P.C. Material Silver cadmium oxide [1], silver nickel [2], gold plating available Terminals Max. Solder Temp. 270°C (518°F) Resistance < 50 milliohms initially Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 13.5 grams Packing unit in pcs. 50 per tray / 500 per carton box COIL Power At Pickup Voltage (typical) 200 mW (235 mW at 60 V) standard coil 140 mW (160 mW at 60 V) sensitive coil Max. Continuous Dissipation 0.8 W at 20°C (68°F) ambient Temperature Rise 26°C (47°F) at nominal coil voltage (standard coil) 17°C (31°F) at nominal coil voltage (sensitive coil) Temperature Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2013-02-27 AZ762H COIL SPECIFICATION - DC COIL Nominal Coil VDC Must Operate VDC Max. Continuous VDC 5 3.5 6.5 6 4.2 ORDER NUMBER* Coil Resistance Ohm ±10% 1 Form A 1 Form C 62 AZ762H-1AB-5DF AZ762H-1CB-5DF 7.8 90 AZ762H-1AB-6DF AZ762H-1CB-6DF 9 6.3 11.7 200 AZ762H-1AB-9DF AZ762H-1CB-9DF 12 8.4 15.6 360 AZ762H-1AB-12DF AZ762H-1CB-12DF 18 12.6 23.4 810 AZ762H-1AB-18DF AZ762H-1CB-18DF 24 16.8 31.2 1,440 AZ762H-1AB-24DF AZ762H-1CB-24DF 48 33.6 62.4 5,760 AZ762H-1AB-48DF AZ762H-1CB-48DF 60 42.0 78.0 7,500 AZ762H-1AB-60DF AZ762H-1CB-60DF * “1AB” or “1CB” denote silver nickel contacts. “F” at the end of the order number denote Class F insulation system. Add suffix “E” after “D” and before “F” at the end of the order number for sealed version. Add suffix “A” before “F” at the end of the order number for gold plated contacts. COIL SPECIFICATION - DC COIL SENSITIVE VERSION ORDER NUMBER* Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance Ohm ±10% 1 Form A 5 3.75 6.5 100 AZ762H-1AB-5DS 6 4.5 7.8 145 AZ762H-1AB-6DS 9 6.75 11.7 325 AZ762H-1AB-9DS 12 9.0 15.6 580 AZ762H-1AB-12DS 18 13.5 23.4 1,300 AZ762H-1AB-18DS 24 18.0 31.2 2,300 AZ762H-1AB-24DS 48 36.0 62.4 9,220 AZ762H-1AB-48DS 60 45.0 78.0 12,860 AZ762H-1AB-60DS * “1AB” denote silver nickel contacts. Substitute “1A” in place of “1AB” for silver cadmium oxide contacts. Add suffix “E” at the end of the order number for sealed version. Add suffix “A” at the end of the order number for gold plated contacts. Add suffix “F” at the end of the order number for Class F insulation system (only available with silver nickel contacts “1AB”). ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2013-02-27 AZ762H MECHANICAL DATA PC BOARD LAYOUT 5.04 15.12 12.7 ± 0.3 29 ± 0.3 5.04 2.6 2.7 7.56 15.7 ± 0.3 * * 3.6 ± 0.5 0.3 ± 0.2 8 x ø 1.3 * Not used on 1 Form A relay Viewed toward terminals WIRING DIAGRAMS 2 x 0.5 x 0.5 6 x 0.5 7.56 6 x 0.8 1 Form A 5.04 15.12 4 5 1 Form C 2 4 5 3 2 2.6 5.04 8 7 1 8 7 6 1 Viewed toward terminals Dimensions in mm. Tolerance: ± 0.25 mm ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2013-02-27