Discontinuation Notice AZ920 Discontinuation date: Date of last order: Recommended replacement: on tin ue d ! ULTRA-SENSITIVE SUBMINIATURE RELAY 31.12.2012 15.11.2012 AZ921 FEATURES • • • • • • • • • Extremely small footprint utilizing only 1 cm² of PCB area Thin vertical profile, only 5 mm wide Slim SIP package 1 Form A contact with up to 5 Amp switching capability High sensitivity, 58 mW pickup 2000 Vrms dielectric strength contact to coil Epoxy sealed UL, CUR file E43203 TÜV certificate R50155999 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) Single button contact or bifurcated contact Ratings Resistive load: TÜV Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) All values at 85°C ambient Vibration 0.062" (1.5 mm) DA at 10–55 Hz 5A 5A 5A 5A Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 3 grams Packing unit in pcs 100 per plastic tube / 1000 per carton box 3 A at 250 VAC, General use, 100k cycles [1][3][4] 5 A at 250 VAC, General use, 100k cycles [3][4] 5 A at 250 VAC, General use, 75k cycles [1] 5 A at 30 VDC, resistive, 100k cycles [1][3][4] 3 A at 250 VAC, General use, 75k cycles [2] 3 A at 30 VDC, resistive, 100k cycles [2] at at at at 250 VAC, 50k cycles [1][2][4] 250 VAC, 10k cycles [3] 30 VDC, 100k cycles [1][2][4] 30 VDC, 80k cycles [3] Silver nickel (single button contact) [1], silver nickel gold plated (bifurcated contact) [2] silver tin oxide (single button contact) [3], silver cadmium oxide (single button contact) [4], gold plating available sc Material Resistance < 50 milliohms initially (at 6 V, 1 A, voltage drop method) COIL Power 58 mW (5-18 V coils) 88 mW (24 V coil) Max. Continuous Dissipation 1.3 W at 20°C (68°F) ambient Temperature Rise 12°C (22°F) 5-18 V coils 17°C (31°F) 24 V coil Di At Pickup Voltage (typical) at nominal coil voltage Temperature Minimum operations 2 x 107 operations 1 x 105 at 5 A, 30 VDC or 250 VAC Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150 VDC* or 250 VAC special precautions must be taken. Please contact the factory. Rated Load UL, CUR Life Expectancy Mechanical Electrical Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F ZETTLER NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2010-12-17 Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: ! AZ920 RELAY ORDERING DATA 6 9 12 18 24 on tin ue d COIL SPECIFICATIONS Nominal Coil VDC 5 31.12.2012 15.11.2012 AZ921 Must Operate VDC 3.5 Max. Continuous VDC 16.5 Coil Resistance Ohm ± 10% 208 4.2 19.9 300 6.3 29.8 675 8.4 39.8 1,200 AZ920–1A–12DE 12.6 59.6 2,700 AZ920–1A–18DE 16.8 65.0 3,200 AZ920–1A–24DE ORDER NUMBER* AZ920–1A–5DE AZ920–1A–6DE AZ920–1A–9DE * “1A” denote silver nickel contacts. Add suffix “B” to “1A” for bifurcated gold plated silver nickel contacts. Add suffix “H” to “1A” for silver tin oxide contacts. Add suffix “E” to “1A” for silver cadmium oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “K” for .3 inch terminal spacing. Add suffix “F” at the end of order number for Class F insulation. MECHANICAL DATA sc Di Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2010-12-17