AZ770H SPST HIGH TEMPERATURE SUBMINIATURE POWER RELAY FEATURES • • • • • • • • Ambient Temperature up to 105°C (221°F) 5 kV dielectric strength, 10 kV surge 8 mm creepage and clearance Proof tracking index (PTI/CTI) 250 5 Amp switching capability 20 A high inrush current Epoxy sealed version available Reinforced insulation, EN 60730-1 (VDE 0631, part 1), EN 60335-1 (VDE 0700, part 1) • UL, CUR file E44211 • VDE certificate 40006815 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 30 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL VDE 5 A at 250 VAC, resistive, 100k cycles 5 A at 250 VAC, 105°C, 100k cycles 3 A at 400 VAC, 105°C, 100k cycles Material Silver nickel, gold plating available Resistance < 100 milliohms initially COIL Power At Pickup Voltage (typical) 113 mW Max. Continuous Dissipation 595 mW at 20°C (68°F) ambient Temperature Rise (at nominal voltage) 22°C (40°F) Temperature Max. 155°C (311°F) NOTES 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at 5 A 250 VAC Res. Operate Time (max.) 8 ms at nominal coil voltage Release Time (max.) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 5000 Vrms coil to contact 1000 Vrms between open contacts Surge Voltage Coil to contact 10,000 V (at 1.2x50 µs) Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution dregree: 3 Nominal voltage: 250 VAC Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 105°C (185°F) Vibration 1.65 mm DA at 10–55 Hz Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4.6 grams Packing unit in pcs 100 per tray / 1000 per carton box ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-17 AZ770H RELAY ORDERING DATA COIL SPECIFICATIONS - TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Coil Resistance Ohm ± 10% Form A (SPST) 3 2.25 5.1 45 AZ770H-1A-3DS 5 3.75 8.5 125 AZ770H-1A-5DS 6 4.50 10.2 180 AZ770H-1A-6DS 9 6.75 15.3 400 AZ770H-1A-9DS 12 9.00 20.4 720 AZ770H-1A-12DS 18 13.50 30.6 1,600 AZ770H-1A-18DS 24 18.00 40.8 2,800 AZ770H-1A-24DS * “1A” denote silver nickel contacts. Add suffix “E” at the end of order number for sealed version. Add suffix “G” at the end of order number for gold plated contacts. MECHANICAL DATA PC BOARD LAYOUT 5 x ø .05 [ø 1.3] .703 Max [17.85] .407 Max [10.35] ø .02 [ø 0.5] 2 x .012 [0.3] .25 [6.35] .30 [7.6] .494 Max [12.55] .157 [4] .60 [15.24] Viewed toward terminals WIRING DIAGRAMS .016 [0.4] .03 [0.8] 1 3 4 2 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-17