AZ830P - Zettler Electronics

Discontinuation Notice
31.12.2012
30.06.2012
AZ832P
!
AZ830P
Discontinuation date:
Date of last order:
Recommended replacement:
on
tin
ue
d
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
•
•
•
•
•
•
•
•
•
High sensitivity, 90 mW pickup
Low profile DIP package
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Epoxy sealed
DC coils to 48 VDC
High switching capacity, 60 W, 125 VA
Fits standard 16 pin IC socket
UL file E43203; CSA file LR 36664
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Set Time (typical)
3 ms at nominal coil voltage
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
Reset Time (typical)
3.5 ms at nominal coil voltage
Capacitance
Contact to contact: 1.0 pF
Contact set to contact: 1.0 pF
Contact to coil: 2.0 pF
Bounce (typical)
At 10 mA contact current
1.5 ms at operate N.O. side
2.5 ms at operate N.C. side
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature
Operating
At nominal coil voltage
Standard: -40°C (-40°F) to 85°C (185°F)
Sensitive: -40°C (-40°F) to 95°C (203°F)
Both: -40°C (-40°F) to 105°C (221°F)
Rated Load
UL
Material
Resistance
2 A at 30 VDC
1 A at 120 VAC
Silver alloy, gold clad. Silver palladium, gold clad
available upon request (not recommended for
current greater than 1 Amp).
< 50 milliohms initially
COIL (Polarized)
Power
Standard coil: 176 mW
Sensitive coil: 90 mW
1.2 W at 20°C (68°F) ambient
sc
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
Standard: 38°C (68°F) at nominal coil voltage
Sensitive: 21°C (38°F) at nominal coil voltage
Storage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
40 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5 grams
Max. 115°C (239°F)
NOTES
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
Di
1.
2.
3.
4.
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-04-08
Discontinuation Notice
Discontinuation date:
Date of last order:
Recommended replacement:
AZ830P
!
RELAY ORDERING DATA
31.12.2012
30.06.2012
AZ832P
Maximum Switching Capacity
on
tin
ue
d
STANDARD RELAYS
COIL SPECIFICATIONS
Nominal
Coil
VDC
5
Max.
Continuous
VDC
7.5
6
9.0
9

Coil
Resistance
± 10%
69.4
Set
Reset
VDC
3.5
AZ830P2–2C–5DE
100
4.2
AZ830P2–2C–6DE
13.5
225
6.3
AZ830P2–2C–9DE
12
18.0
400
8.4
AZ830P2–2C–12DE
24
36.0
1,600
16.8
AZ830P2–2C–24DE
48
72.0
6,400
33.6
AZ830P2–2C–48DE
9.0
8.0
7.0
6.0
5.0
4.0
ORDER NUMBER*
3.0
2.0


.9
.8
.7
.6
.5

.4
SENSITIVE RELAYS
.3
5
11.0
139
3.5
AZ830P2–2C–5DSE
6
13.0
200
4.2
AZ830P2–2C–6DSE
9
19.5
450
6.3
AZ830P2–2C–9DSE
12
26.0
800
8.4
AZ830P2–2C–12DSE
24
53.0
3,200
16.8
AZ830P2–2C–24DSE
48
106.0
12,800
33.6
AZ830P2–2C–48DSE
.2


* Add suffix “A” for silver palladium gold clad contacts.
MECHANICAL DATA
Coil Temperature Rise
.788
(20.0)

.390
(9.9)



.386
.366 (9.8)
(9.3)


.138
(3.5)



.044
(1.1)
.200
(5.07)
.100
(2.54)
(.024 ± .005)
(0.6 ± 0.13)
TYP
.200
(5.07)
.200
(5.07)
.012 ± .005
(0.3 ± 0.13)
TYP








.044
(1.1) REF
0.03 DIA
(0.8)
(10 HOLES)






sc




1
4
2
6
Di
–
16


.044
(1.1) REF

8


0.1
(2.54)


+
+

  




  











–
15
13
11
9


Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-04-08