Report No.：HS1003040086A .：9900741-E RA No Version：A ESD (HUMAN BODY MODE) TEST REPORT Company ：SYNC POWER CORP Model Name ：SPE0505 Date Received ：MAR 04, 2010 Date Tested ：MAR 05, 2010 TESTING LABORATORY IS ACCREDITED BY: IEC/IECQ 17025 certificate of independent test laboratory approval Certificate No.：T1091 ISO 9001 certificate is approved by TUV CERT certification body of TUV NORD Cert GmbH WE HEREBY CERTIFY THAT: The test(s) shown in the attachment were conducted according to the indicating procedures. We assume full responsibility for the accuracy and completeness of these tests and vouch for the qualifications of all personnel performing them. Name Signature Date Test Engineer Jay Fang MAR 04, 2010 Section Manager Even Lin MAR 05, 2010 Note： 1. This report will be invalid if reproduced in whole or in part. 2. This report refers only to the specimen(s) submitted to test, and is invalid if used separately. 3. This report is ONLY valid with the examination seal and signature of this institute. 4. The tested specimen(s) will only be preserved for thirty days from the date issued, if not collected by the applicant. Integrated Service Technology Inc. Report No.：HS1003040086A Reliability & Failure Analysis Engineering Group RA No. 1F, No.19, Pu-ding Rd., Hsin - chu City, Taiwan, R.O.C. Page ：9900741-E 1 of Tel: 886-3-578-2266, Fax: 886-3-5770988 http://www.istgroup.com TABLE OF CONTENTS 1. GENERAL INFORMATION 1.1 DESCRIPTION OF UNIT......................................................................... 2 2. ESD (HUMAN BODY MODE) TEST 2.1 TEST EQUIPMENT ................................................................................. 3 2.2 LABORATORY AMBIENCE CONDITION ............................................... 3 2.3 REFERENCE DOCUMENT..................................................................... 3 2.4 TEST CONDITION .................................................................................. 3 2.5 SUMMARY OF TEST .............................................................................. 3 2.6 CONTENTS OF TEST............................................................................. 4 4 Integrated Service Technology Inc. Report No.：HS1003040086A Reliability & Failure Analysis Engineering Group RA No. 1F, No.19, Pu-ding Rd., Hsin - chu City, Taiwan, R.O.C. Page Tel: 886-3-578-2266, Fax: 886-3-5770988 http://www.istgroup.com 1. GENERAL INFORMATION 1.1 DESCRIPTION OF UNIT MANUFACTURER ：SYNC POWER CORP DEVICE NAME ：SPE0505 PACKAGED / PIN COUNT ：SOT-23-6 REFERENCE DOCUMENT ：MIL-STD-883G Method 3015.7 TEST VOLTAGE ：500V ~ 8000V (±), Step: 500V (±) SAMPLE QUANTITY ：10 ea FAILURE CRITERIA ：FOR V CHANGE AT 1μA ±30% ※ Failure Judgment: IV curve shift over 1μA±30% at breakdown point. Normal IV Curve: 1μA I -30% +30% Breakdown Point V Breakdown Point -30% +30% Normal IV Curve: 1μA ：9900741-E 2 of 4 Integrated Service Technology Inc. Report No.：HS1003040086A Reliability & Failure Analysis Engineering Group RA No. 1F, No.19, Pu-ding Rd., Hsin - chu City, Taiwan, R.O.C. Page ：9900741-E 3 of 4 Tel: 886-3-578-2266, Fax: 886-3-5770988 http://www.istgroup.com 2. ESD (HUMAN BODY MODE) TEST 2.1 TEST EQUIPMENT Test Equipment Equipment Number Tester KEYTEK ZAPMASTER #11 09021 2.2 LABORATORY AMBIENCE CONDITION Temperature：23±5°C Relative humidity：55%10% (RH) 2.3 REFERENCE DOCUMENT The test is based on MIL-STD-883G Method 3015.7 2.4 TEST CONDITION ALL – PIN2 (+) ALL – PIN2 (-) 2.5 SUMMARY OF TEST Test Model : HBM Test condition ALL – PIN2 (+) ALL – PIN2 (-) ALL:1,5-6 MIL-STD Classification Class : 3B ESD Sensitivity Passed : ±8000V Sample Quantity 5 5 Passed Volts +8000V -8000V PIN2:2 Class 0 : ＜ 250V. Class 1A : ≧ 250V , ＜499V Class 1B : ≧ 500V , ＜999V Class 1C : ≧ 1000V , ＜1999V Class 2 : ≧ 2000V , ＜3999V Class 3A : ≧ 4000V , ＜7999V Class 3B : ≧ 8000V Integrated Service Technology Inc. Report No.：HS1003040086A Reliability & Failure Analysis Engineering Group RA No. 1F, No.19, Pu-ding Rd., Hsin - chu City, Taiwan, R.O.C. Page ：9900741-E 4 of Tel: 886-3-578-2266, Fax: 886-3-5770988 http://www.istgroup.com 2.6 CONTENTS OF TEST ALL – PIN2 (+) Test Pin FAIL VOLTAGE (UNIT: V) #1 #2 #3 #4 #5 1 PASS PASS PASS PASS PASS 5 PASS PASS PASS PASS PASS 6 PASS PASS PASS PASS PASS ALL – PIN2 (-) Test Pin FAIL VOLTAGE (UNIT: V) #1 #2 #3 #4 #5 1 PASS PASS PASS PASS PASS 5 PASS PASS PASS PASS PASS 6 PASS PASS PASS PASS PASS 4