IPS Series Industrial Pressure Transducer - Ceramic Piezo-resistive thick film ceramic sensor Stainless steel body Accuracy <±0.25% FS BFSL Various outputs including mV, Volts and mA. Pressure ranges from -1 to 400 bar The IPS series is suitable for use in a wide range of industrial applications. The probe uses a piezoresistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications.. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Electrical Protection Supply reverse polarity Electromagnetic compatibility Mechanical Stability Shock Vibration Temperatures & Thermal Effects Media Temperature Ambient Temperature Storage temperature Compensated temperature range Thermal Zero Shift (TZS) Thermal Span Shift No damage/no function CE Compliant 100g / 11s 10g RMS (20 - 2000Hz) -40ºC to +135ºC -20ºC to +80ºC -40ºC to +125ºC +20ºC to +80ºC <±0.04% /FS/ºC <±0.015% /ºC Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge, bar 1 Compound range bar -1 to 0 Permissible Overpressure bar 2 Burst Pressure bar 4 2 -1 to 2 4 5 5 -1 to 5 10 12 Output Signals and Supply Voltages Wire system Output 2-wire 4-20mA 3-wire 0-5Vdc Supply Voltage 9-32Vdc 9-32Vdc 4-wire (amplified) 3-12Vdc 10mV/V (ratiometric) Performance Accuracy (Non-Linearity & Hysteresis) Setting Errors (offsets) 2-wire 3-wire 4-wire Material Specifications Housing “O” ring seals Diaphragm Media wetted parts diaphragm Weight Installation position Operational Life Insulation resistance 10 20 50 -1 to 9 -1 to 19 -1 to 24 20 40 100 25 50 120 Connection Pin Nos +ve Supply Pin 1 +ve Supply Pin 1 +ve Output Pin 3 +ve Supply Pin 1 +ve Output Pin 3 <±0.25% / FS (BFSL) Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS @ 10 Volts 303 Stainless Steel Viton Ceramic Al2O3 96% Housing & connection, “O” ring seal, Approx 100g Any 6 > 100x 10 cycles > 50MOhms at 50Vdc 100 250 400 200 250 400 500 650 650 -ve Supply -ve Supply Ground -ve Supply -ve Output Pin 2 Pin 2 Earth Pin Pin 2 Earth Pin Ground Earth Pin Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IPS Series Industrial Pressure Sensor - Ceramic Part Number IPS-G1000-3 IPS-G1000-5 IPS-G1000-6 IPS-G6000-3 IPS-G6000-5 IPS-G6000-6 IPS-GM1P9-5 IPS-GM1P9-6 IPS-G1002-3 IPS-G1002-5 IPS-G1002-6 IPS-G1602-3 IPS-G1602-5 IPS-G1602-6 IPS-C0184-5 IPS-C0184-6 IPS-G2502-3 IPS-G2502-5 IPS-G2502-6 IPS-G4002-3 IPS-G4002-5 IPS-G4002-6 IPS-G1003-3 IPS-G1003-5 IPS-G1003-6 IPS-G2503-3 IPS-G2503-5 IPS-G2503-6 IPS-G4003-3 IPS-G4003-5 IPS-G4003-6 Pressure Rating 0 - 1 Bar G 0 - 1 Bar G 0 - 1 Bar G 0 - 6 Bar G 0 - 6 Bar G 0 - 6 Bar G -1 to +9 Bar G -1 to +9 Bar G 0 - 10 Bar G 0 - 10 Bar G 0 - 10 Bar G 0 - 16 Bar G 0 - 16 bar G 0 - 16 bar G -1 to +24 Bar G -1 to +24 Bar G 0 - 25 Bar G 0 - 25 Bar G 0 - 25 Bar G 0 - 40 Bar G 0 - 40 Bar G 0 - 40 Bar G 0 - 100 Bar G 0 - 100 Bar G 0 - 100 Bar G 0 - 250 Bar G 0 - 250 Bar G 0 - 250 Bar G 0 - 400 Bar G 0 - 400 Bar G 0 - 400 Bar G Output 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4-20mA 0-5V 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V 0 - 100mV 4 - 20mA 0 - 5V Mechanical Dimensions Ø 24mm Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 18mm AF Hex 1/4” BSP male thread 50mm Nominal 4 pin DIN 43650 connector 81mm Nominal PG7 cable entry gland 11.8mm Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.