ILLSU series Submersible Tank Gauging Level Transmitter Piezo-resistive sensor Stainless steel housing and diaphragm Accuracy <0.5% FS BFSL Various outputs including Volts and mA. Depth ranges from 0-48" (0-4ft) to 0-480" (0-40ft) WG Options available on the ILLSU transmitter. Pressure range Voltage or current output Cable length The ILLSU is designed for use in continuous submersion in liquids such as water, oils and fuels in small tanks, where conventional mechanical level switches and sensors are not ideal and more level ‘control’ and measurement is required. Suitable applications Static tank level Container or chamber level Vehicle tank level IBC, IBC Tote or Pallet Tank Rainwater harvesting Performance Accuracy (Non-Linearity & Hysteresis) <±0.5% / FS (BFSL) The probe uses a piezo-resistive silicon sensing technology, isolated from the media by a diaphragm within the stainless steel housing It offers excellent stability, repeatability and resolution for applications where a small tank level is required, from as low as 3ft through to 40 ft high tanks. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Setting Errors (offsets) 2-wire 3-wire Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS Permissible Load 2-wire 3-wire Rmax = [(Supply-9min)/0.02]W Rmin = 10kW Influence Effects Supply Load <0.005% FS / 1V 0.05% FSO / kW Custom versions can be made for particular applications. Electrical Protection Supply reverse polarity No damage/no function Electromagnetic compatibility CE Compliant Mechanical Stability Shock Vibration 100g / 11s 10g RMS (20 - 2000Hz) Material Specifications Housing “O” ring seals Diaphragm Cable sheath material Media wetted parts Weight Temperatures & Thermal Effects Media Temperature -20ºC (Non-freezing) to +60ºC Storage temperature -20ºC to +70ºC Compensated temperature range 20ºC±25ºC Thermal Zero Shift (TZS) <±0.04% /FS/ºC Thermal Span Shift (TSS) <±0.015% /ºC Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 Installation position Operational life Insulation resistance 303 Stainless Steel Viton 316L Stainless Steel FEP standard Housing, “O” ring seal, diaphragm, cable sheath Transmitter: approx 2.65oz (75g) Cable: 1.7oz (48g) per yard Any, small zero shift when tilted through 90º 6 > 100x 10 cycles 50MW@50Vdc www.cynergy3.com CERTIFIED © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ILLSU series Submersible Tank Gauging Level Transmitter Pressure Ranges and Passive mV/V Outputs Nominal Pressure, Gauge inchWG Permissible Overpressure inchWG 40 800 100 800 200 800 280 2000 Output Signals and Supply Voltages Wire systemOutput 2-wire 4-20mA Supply Voltage 9-32Vdc Connection +ve Supply -ve Supply Ground Cable Screen Wire Colours Brown White Pink Green 3-wire 9-32Vdc +ve Supply -ve Supply +ve Output Ground Cable Screen Brown White Yellow Pink Green 0.5-4.5Vdc non-ratiometric Care must be taken regarding screening and earthing when using voltage output Part No ILLSU-Gi048-5-003 ILLSU-Gi120-5-005 ILLSU-Gi240-5-008 ILLSU-Gi360-5-012 ILLSU-Gi480-5-016 ILLSU-Gi048-D-003 ILLSU-Gi120-D-005 ILLSU-Gi240-D-008 ILLSU-Gi360-D-012 ILLSU-Gi480-D-016 Pressure Range 0-48" WG 0-120" WG 0-240" WG 0-360" WG 0-480" WG 0-48" WG 0-120" WG 0-240" WG 0-360" WG 0-480" WG Cable Length 10ft 16ft 26ft 40ft 52ft 10ft 16ft 26ft 40ft 52ft 400 2000 Output 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire (Custom ranges and outputs available on request) Mechanical Dimensions Installation Note. The vented cable is fitted with a filter (shown below) to prevent the entry of moisture. If removed, ensure vent tube is positioned in a clean, dry area. 3.15" (33ft) (0.945") ISO9001C E R T I F I E D www.cynergy3.com ILLSU 2015 © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.