ILS series Submersible Level Transmitter Stainless steel, piezo-resistive sensor Accuracy: <0.1% FS BFSL Pressure ranges from 1mWG to 100mWG Various cable lengths Suitable applications River level Reservoir level Tank level Borehole level Aquifer level Environmental monitoring V-notch weir flow measurement Performance The ILS is designed for use in continuous submersion in liquids such as water, oil and other non-aggressive chemicals. The submersible uses the latest piezo-resistive media-isolated silicon sensing technology and a stainless steel diaphragm within a 316L stainless steel housing. It offers excellent stability, repeatability and resolution, as required for use in rivers and reservoirs. This submersible level transmitter is the ideal product for reliable and repeatable hydrostatic level measurement. The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics. Accuracy (Non-Linearity & Hysteresis) <±0.1% / FS (BFSL) Setting Errors (offsets) Permissible Load Influence Effects Zero & Full Scale, <±0.5% / FS Rmax = [(Voltage Supply-9)/0.02]Ohms Supply <0.005% FS / 1V Load 0.05% FSO / kOhm Input Pressure Range Nominal Pressure, Gauge mWG 1 2.5 5 10 20 50 100 Permissible Overpressure mWG 20 20 50 50 50 100 100 Output Signals and Supply Voltages Wire systemOutput 2-wire 4-20mA Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Supply Voltage 9-32Vdc Connection +ve Supply -ve Supply Ground Cable Screen PUR sheath Wire Colours Red Blue White Green Custom versions can be made for particular applications. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] Web: www.cynergy3.com ISO9001C E R T I F I E D www.cynergy3.com © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ILS series Submersible Level Transmitter Electrical Protection Supply reverse polarity protection Lightning protection Electromagnetic compatibility No damage/no function Internally fitted CE Compliant Mechanical Stability Shock Vibration 100g / 11ms 10g RMS (20 - 2000Hz) Temperature & Thermal Effects Media temperature -20ºC (Non-freezing) to +60ºC Storage temperature -20ºC to +70ºC Compensated temperature range 20ºC±25ºC Thermal zero shift (TZS) <±0.02%/FS/ºC Thermal span shift (TSS) <±0.01%/ºC Part No ILS-G0100-003 ILS-G0250-005 ILS-G0500-007 ILS-G1000-015 ILS-G2000-025 ILS-G5000-060 ILS-G1002-110 Material Specifications Housing “O” ring seals Diaphragm Cable sheath material Media wetted parts cable sheath Miscellaneous Weight Current consumption Installation position Operational life Pressure Range 0-1mWG (0-39"WG) 0-2.5mWG (0-98"WG) 0-5mWG (0-197"WG) 0-10mWG (0-394"WG) 0-20mWG (0-788"WG) 0-50mWG (0-1970"WG) 0-100mWG (0-3940"WG) Cable Length 3M 5M 7M 15M 25M 60M 110M 316L Stainless Steel Viton 316L Stainless Steel PUR Housing, “O” ring seal, diaphragm & Transmitter: approx 250g Cable: 48g per metre Limits at 28mA Any, small zero shift when tilted through 90º 6 > 100x 10 cycles Output 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA PUR sheathed vented cable Mechanical Dimensions Boot 150mm Nominal Installation Note. The vented cable is fitted with a filter (shown below) to prevent the entry of moisture. If removed, ensure vent tube is positioned in a clean, dry area. Nose cone 25mm dia ISO9001C E R T I F I E D www.cynergy3.com © 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.