COINlight® AR111 Technical Information The professional LED module for AR111 halogen reflector lamps Tender text Designed to fit into standard AR111 fixture Utilizes 12 high flux LEDs Available in warm white and cold white in combination with fine-binning Integrated heat sink Suitable for floodlighting with 45° beam angle and spotlighting with 24° beam angle Lifetime (L70) 30,000 hrs @Tc max Best efficiency in combination with OSRAM OPTOTRONIC OT constant current drivers Table of contents: Tender text.............................................................................................................1 A) Technical Information ......................................................................................2 1) Housing, Mounting and Accessories .......................................................................2 2) Installation ..................................................................................................................3 3) Optical features ..........................................................................................................4 4) Control ........................................................................................................................8 5) Standard Compliance ................................................................................................8 B) Logistic Data.....................................................................................................9 Technical Information Subject to modification Status as of 16/11/2011 Page 1 / 9 COINlight® AR111 A) Technical Information 1) Housing, Mounting and Accessories Aluminum housing which also takes the heat sink function Ø111 x 46 [mm] (H), Ø at light source Housing design according to the IP standards in the application. LED module itself and all its components may not be mechanical stressed. Aluminum Body material Polycarbonate PC LEDs cover material Reflector material Polycarbonate (PC) with Polymethylmethacrylate (PMA) Height h [mm] 46 Diameter d [mm] 111 Mechanical suspension of bracket Comply with IEC 60598-1 (section 4) 350 Weight [g] Ambient temperature Ta [°C] -40 … 40 (Ta in free air) Storage temperature Tstg [°C] -40 … 80 Operation temperature Tc [°C] -20 … 80 (measure at Tc point) Technical Information Subject to modification Status as of 16/11/2011 Page 2 / 9 COINlight® AR111 2) Installation Installation of LED modules with power supplies needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Assembly must not damage or destroy conducting paths on the circuit board. Correct electrical polarity needs to be observed. Wrong polarity may destroy the module and will result in no light emission. Serial connection is highly recommended as safe electrical operation mode. Electronic in parallel connection is forbidden. Pay attention to standard ESD precautions when installing the module. Supply current cannot exceed 720 mA. Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. Pay attention not to exceed the maximum operation temperature 80 °C at Tc point when the modules are used in enclosed environment. Typical wattage [W] 28 20 13 Maximum wattage [W] 32 23 16 Rated current [mA] 700 500 350 Current range [mA] 665 – 735 465 – 535 315 – 385 ESD protection Contact 4 kV and air 8kV All technical parameters apply to the entire module. In view of the complex manufacturing process for light-emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. Exceeding the maximum permitted temperatures reduces the lifetime of the module significantly or may even destroy the module. Exceeding the maximum permitted operating voltage causes an overload of the module which as well reduces the lifetime of the module significantly or may even destroy the module. Technical Information Subject to modification Status as of 16/11/2011 Page 3 / 9 COINlight® AR111 Independent operation OT 35/200-240/700 LTCS and OT 45/200-240/700 LTCS + = Integrated, design in operation OT 35e/200-240/700 Technical Information Subject to modification Status as of 16/11/2011 Page 4 / 9 COINlight® AR111 3) Optical features Polycarbonate (PC) Reflector material with Polymethylmethacrylate (PMMA) LED cover High flux LEDs inside Reference Data for 700mA and 28W Model CT12A-W4F-827-L24 CT12A-W4F-827-L45 CT12A-W4F-830-L24 CT12A-W4F-830-L45 CT12A-W4F-840-L24 CT12A-W4F-840-L45 Current [mA] Luminous Flux [lm] lm/W Luminous Intensity [cd] Beamangle [°] 700 700 700 700 700 700 800 960 1050 1200 1050 1200 29 34 38 43 38 43 3200 1760 4300 2200 4300 2200 24 45 24 45 24 45 CCT CRi [K] (min) 2700 2700 3000 3000 4000 4000 80 80 80 80 80 80 Reference Data for 500mA and 20W Model CT12A-W4F-827-L24 CT12A-W4F-827-L45 CT12A-W4F-830-L24 CT12A-W4F-830-L45 CT12A-W4F-840-L24 CT12A-W4F-840-L45 Current [mA] Luminous Flux [lm] lm/W Luminous Intensity [cd] Beamangle [°] 500 500 500 500 500 500 690 820 900 1030 900 1030 34 41 45 51 45 51 2800 1510 3690 1890 3690 1890 24 45 24 45 24 45 CCT CRi [K] (min) 2700 2700 3000 3000 4000 4000 80 80 80 80 80 80 Reference Data for 350mA and 13W Model CT12A-W4F-827-L24 CT12A-W4F-827-L45 CT12A-W4F-830-L24 CT12A-W4F-830-L45 CT12A-W4F-840-L24 CT12A-W4F-840-L45 Technical Information Subject to modification Current [mA] Luminous Flux [lm] lm/W Luminous Intensity [cd] Beamangle [°] 350 350 350 350 350 350 550 660 720 820 720 820 42 50 55 63 55 63 2250 1200 2950 1500 2950 1500 24 45 24 45 24 45 CCT CRi [K] (min) 2700 2700 3000 3000 4000 4000 80 80 80 80 80 80 Status as of 16/11/2011 Page 5 / 9 COINlight® AR111 Technical Information Subject to modification Status as of 16/11/2011 Page 6 / 9 COINlight® AR111 Technical Information Subject to modification Status as of 16/11/2011 Page 7 / 9 COINlight® AR111 4) Control Please ensure that only DC constant current power supply of an adequate power should be used to operate the total load. Ballast / Control gear OT35 / 220-240 /700 LTCS OT35e / 220 – 240 /700 OT45 / 220 – 240 /700 LTCS Current [mA] Power [W] Nr. AR111 700 28 1 500 20 1 350 13 2 700 28 1 500 20 1 350 13 2 700 28 1 500 40 2 350 39 3 In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically stabilized power supply protecting against short circuits, overload and overheating. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation. 5) Standard Compliance CE Eye security / Photo biological safety Flammability Protection class Environment Technical Information Subject to modification IEC 62031, EN 61347-2-11 Clause 12 & 14, EN 55015, EN61547 CIE S 009 / EN 60598-1 IEC 60598-1 (Class I) EN 60529 Dry/Damp location, IP20 RoHS, EU directive 202/95/CE Status as of 16/11/2011 Page 8 / 9 COINlight® AR111 B) Logistic Data Product Name Product code EAN10 SU COINlight® AR111 CT12A-W4F-827-L24 4008321725158 12 pcs COINlight® AR111 CT12A-W4F-827-L45 4008321725424 12 pcs COINlight® AR111 CT12A-W4F-830-L24 4008321589767 12 pcs COINlight® AR111 CT12A-W4F-830-L45 4008321589941 12 pcs COINlight® AR111 CT12A-W4F-840-L24 4008321590121 12 pcs COINlight® AR111 CT12A-W4F-840-L45 4008321590305 12 pcs OPTOTRONIC® OT 35e/220-240/700 4008321691248 1 pc OPTOTRONIC® OT 35/200-240/700 LTCS 4008321169365 1 pc OPTOTRONIC® OT45/220-240/700 LTCS 4008321664433 1 pc OTp cable clamp OTp Cable clamp K3 4008321966162 10 pcs Sales and Technical Support OSRAM AG Hellabrunner Strasse 1 D - 81536 München Germany www.osram.com +49 (0)89 6213-0 Technical Information Subject to modification Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers. Status as of 16/11/2011 Page 9 / 9