www.osram.com/flex SLIMCONNECTsystem FLEX TECHNICAL DATASHEET BENEFITS ‒ ‒ ‒ ‒ ‒ Assembly without tools Robust connection Fits into SLIM TRACK Keep LED pitch at board to board connection Extension wires for connection across corners Connectors l1 l1 Product LF-2PIN Flex SC LF-2PIN 1M Flex SC Order Code 4008321832436 4052899087743 Cable length l1 [mm] 500 1000 Rated insulation voltage 25 V Rated current 5A Connector closing force 45 N LED PCB retention force ≥ 15 N Volume resistance ≤ 30 mΩ Conductor cross section AWG 22 Ambient temperature (storage/transport) -40 – 85 °C Ambient temperature (operation) LLT - ULT -30 - 70 °C Product LF-4PIN Flex SC LF-4PIN 1M Flex SC Order Code 4052899904835 4052899087767 Cable length l1 [mm] 500 1000 Rated insulation voltage 25 V Rated current 5A Connector closing force 45 N LED PCB retention force ≥ 15 N Volume resistance ≤ 30 mΩ Conductor cross section AWG 22 Ambient temperature (storage/transport) -40 – 85 °C Ambient temperature (operation) LLT - ULT -30 - 70 °C Product LF-CONN Flex SC Order Code 4008321832467 Rated insulation voltage 25 V Rated current 5A Connector closing force 75 N LED PCB retention force ≥ 15 N Volume resistance ≤ 30 mΩ Ambient temperature (storage/transport) -40 – 85 °C Ambient temperature (operation) LLT - ULT -30 - 70 °C Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2014-12-16 SLIMCONNECTsystem FLEX 1 Extension Wires Product LF-WIRE-30 FLEX SC Order Code 4008321875587 Product LF-WIRE-150 FLEX SC Order Code 4008321875563 How to apply the extension wires LF-CONN Flex SC 4008321832467 LF-CONN Flex SC 4008321832467 LINEARLIGHT FLEX Module LINEARLIGHT FLEX Module LF-WIRE-30 FLEX SC 4008321875587 LF-WIRE-150 FLEX SC 4008321875563 Logistical Information Product Order Number Shipping Units LF-2PIN Flex SC 4008321832436 10 LF-2PIN 1M Flex SC 4052899087743 10 LF-4PIN Flex SC 4052899904835 10 LF-4PIN 1M Flex SC 4052899087767 10 LF-CONN Flex SC 4008321832467 25 LF-WIRE-30 FLEX SC 4008321875587 100 LF-WIRE-150 FLEX SC 4008321875563 50 Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2014-12-16 SLIMCONNECTsystem FLEX 2 Safety information ‒ ‒ ‒ ‒ ‒ ‒ All components of the SLIMCONNECTsystem FLEX must be assembled to avoid any stress on the wires and/or board connectors. The installer must ensure that there is adequate strain relief between the board connection and the wiring. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. The connector has no inverse polarity protection. There will be no electrical function if connector is not well positioned or if polarity is inverse. Several modules can be damaged (see the respective module data sheet). The maximum operation current may not be exceeded. The SLIMCONNECTsystem FLEX is designed for indoor applications only. Any unprotected outdoor use is not allowed. A suitable enclosure IP67 is required if the system is to be exposed to humidity and /or dust. Condensation water in the IP67 enclosure is not allowed. Assembly Information ‒ ‒ ‒ For electrical connection of the LINEARlight FLEX, both, module and connector must be positioned with the correct side up as shown in the graphic. Pay attention to the correct polarity between feeder and module: ‒ LF-2PIN Flex SC / LF-2PIN 1M Flex SC Black wire = “-“ pole / red wire = “+” pole ‒ LF-4PIN Flex SC / LF-4PIN 1M Flex SC Black wire = “+” pole / Blue Wire = “B”-pad / Green Wire = “G”-pad / Red Wire = “R”-pad ‒ LF-CONN Flex SC Particular attention is required when using the connector for board to board connection: The '+' pole of the first module has to be connected to the '+' pole of the second module. In case of wrong polarity no light will be emitted and the modules can be damaged Then push the module into the connector and press on the connector to fix the connection. Make sure to work on a flat and robust surface. ‒ In order to maintain adequate electrical contact, the connectors are designed for single use. However, to reuse the connected PCB, a removal is possible but will result in the destruction of the connector. Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2014-12-16 SLIMCONNECTsystem FLEX 3 LINEARlight POWER Flex LINEARlight Flex® ShortPitch LINEARlight Flex® ADVANCED LINEARlight Flex® ADVANCED (Monochromatic) LF-WIRE-150 FLEX SC 4008321875563 LF-WIRE-30 FLEX SC 4008321875587 LF-CONN Flex SC 4008321832467 Product Name LF-4PIN Flex SC 4052899904835 LF-4PIN 1M Flex SC 4052899087767 Family LF-2PIN Flex SC 4008321832436 LF-2PIN 1M Flex SC 4052899087743 Matching LINEARLIGHT FLEX modules EAN Color K LF06P2-W5F-827 4008321971272 white 2700 x x x x LF06P2-W5F-830 4008321971296 white 3000 x x x x x x x LF06P2-W5F-840 4008321971319 white 4000 x LF06P2-W5F-850 4008321971791 white 5000 x x x x LF06P2-W5F-865 4008321971333 white 6500 x x x x LF06S-W3F-827 4008321973887 white 2700 x x x x LF06S-W3F-830 4008321973894 white 3000 x x x x LF06S-W3F-840 4008321973900 white 4000 x x x x LF06S-W3F-850 4008321973917 white 5000 x x x x LF06S-W3F-865 4008321973924 white 6500 x x x x LF06A-W3F-827 4008321973986 white 2700 x x x x LF06A-W3F-830 4008321973993 white 3000 x x x x LF06A-W3F-840 4008321974006 white 4000 x x x x LF06A-W3F-850 4008321974013 white 5000 x x x x x x x LF06A-W3F-865 4008321974020 white 6500 x LF05A2-B3 4052899924123 blue - x x x x LF05A2-T3 4052899924116 green - x x x x LF05A2-R3 4052899924086 red - x x x x LF05A2-Y3 4052899924109 yellow - x x x x LF05A2-O3 4052899924093 orange - x x x x LF05E2-W2F-827 4008321971357 white 2700 x x x x LF05E2-W2F-730 4008321971371 white 3000 x x x x LF05E2-W2F-740 4008321971395 white 4000 x x x x LF05E2-W2F-865 4008321971418 white 6500 x x x x LF05E-B2 4008321955425 blue - x x x x LF05E-R1 4008321955418 red - x x x x LF05E-T2 4008321955449 green - x x x x LF05E-Y1 4008321955432 yellow - x x x x LF05CA2-RGB3 4008321851536 RGB - x x x LINEARlight Flex® ECO LINEARlight Colormix Flex x Contacts & Information OSRAM GmbH Sales and technical support is given by the local OSRAM subsidiaries. On the OSRAM website all subsidiaries are listed with complete address and phone numbers. Marcel-Breuer-Straße 6, 80807 Munich, Germany www.osram.com +49.89.6213-0 OSRAM LED Systems OSRAM catalogue General information www.osram.com/led-systems http://catalog.osram.com www.osram.com Due to the special conditions of manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. Subject to change without notice. Errors and omissions excepted. Version: 2014-12-16 SLIMCONNECTsystem FLEX 4