OSRAM PrevaLED® COIN 50 Technical Information Benefits Fits in most existing MR16 traditional luminaires Easy & fast design-in for luminaire manufacturers Narrow beam angles, 24o and 40o High lumen output for HID-mini replacement Flexibility through 3 lumen packages and 2 CCTs Applications Shop - Cabinet & Shelf Hospitality - Restaurant & Hotel - Corridors & Elevator Technical Operating Data Product Current [mA] Power Flux [lm] Lum. Intensity [cd] Typ. CRI [Ra] Efficacy [lm/W] PL-CN50-700-930-24D-G1 350 11.3 24 PL-CN50-700-940-24D-G1 350 11.3 24 3000 750 3070 92 66 4000 790 3235 92 PL-CN50-700-930-40D-G1 350 11.3 70 40 3000 750 1420 92 PL-CN50-700-940-40D-G1 350 66 11.3 40 4000 790 1500 92 PL-CN50-900-830-24D-G1 70 350 11.3 24 3000 920 3770 83 81 PL-CN50-900-840-24D-G1 350 11.3 24 4000 980 4015 83 87 PL-CN50-900-830-40D-G1 350 11.3 40 3000 920 1745 83 81 PL-CN50-900-840-40D-G1 350 11.3 40 4000 980 1860 83 87 PL-CN50-1100-830-24D-G1 350 13.5 24 3000 1080 4425 83 80 PL-CN50-1100-840-24D-G1 350 13.5 24 4000 1150 4710 83 85 PL-CN50-1100-830-40D-G1 350 13.5 40 3000 1080 2050 83 80 PL-CN50-1100-840-40D-G1 350 13.5 40 4000 1150 2180 83 85 [W] Radiance Color Angle [°] Temp. [K] Lum. All Data are related to the entire module Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data Technical Features Module ready to use with two cables: Color tolerance: <MacAdam 4 SDCM - red cable (+ pole) tp temperature of 75oC (see IEC/PAS 62717) - black cable (- pole) Max. tc temperature of 95oC (see IEC/PAS 62717) Cable length 500 mm, cable Ø 1.6 mm/AWG 22 L70B50 >=50,000 hours at tp=75oC Color Rendering index CRI (Ra) typ. 92 for PL-CN50700 and typ. 83 for PL-CN50-900 & PL-CN50-1100 Best efficacy in combination with OSRAM OPTOTRONIC® constant current control gears Modul efficacy up to 87 lm/W PrevaLED® COIN 50 – 18.08.2013 Page 1 OSRAM Minimum and Maximum Ratings Product Operating Temperature Storage Temperature Max. Current At tc-Point [C°]* [C°]* [mA]* PL-CN50-700-930-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-700-940-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-700-930-40D-G1 -20 … 95 -40 … 80 370 PL-CN50-700-940-40D-G1 -20 … 95 -40 … 80 370 PL-CN50-900-830-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-900-840-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-900-830-40D-G1 -20 … 95 -40 … 80 370 PL-CN50-900-840-40D-G1 -20 … 95 -40 … 80 370 PL-CN50-1100-830-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-1100-840-24D-G1 -20 … 95 -40 … 80 370 PL-CN50-1100-830-40D-G1 -20 … 95 -40 … 80 370 PL-CN50-1100-840-40D-G1 -20 … 95 -40 … 80 370 *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module. Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the tc-point see drawing below. Dimensions & Mechanical data Dimension (mm) Ø50 x 50 (H) Mounting MR16 similar Optics PC lens Weight 80 grams PrevaLED® COIN 50 – 18.08.2013 Page 2 OSRAM Standard Compliance Safety EN 62031, IEC 60598-1, UL 8750 EMC EN 55015, EN 61547 Eye Security EN 62471, RG1 Ingress Production Dry Location, IP 20 Environment RoHS Electrical Operating Conditions PrevaLED® COIN 50 – 18.08.2013 Page 3 OSRAM Safety Information The LED module itself and all its components must not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. To avoid mechanical damage to the connecting cables, the module should be attached securely to the intended substrate. Heavy vibration should be avoided. In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically stabilised power supply protecting against short circuits, overload and overheating. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. The declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information"). OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Correct electrical polarity needs to be obsered. Wrong polarity will destory the module and will result in no light emission. Pay attention to standard ESD precautions when installing the module. The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards in the application. Pay attention not to exceed the maximum operation temperature at tc point when the modules are used in enclosed environment. PrevaLED® COIN 50 – 18.08.2013 Page 4 OSRAM Ordering Guide Product Name PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 PrevaLED® COIN 50 Product Code Product Number (EAN10) Product Number (EAN40) Piece per box PL-CN50-700-930-24D-G1 4052899918436 4052899918559 20 PL-CN50-700-940-24D-G1 4052899918443 4052899918566 20 PL-CN50-700-930-40D-G1 4052899918450 4052899918573 20 PL-CN50-700-940-40D-G1 4052899918467 4052899918580 20 PL-CN50-900-830-24D-G1 4052899918474 4052899918597 20 PL-CN50-900-840-24D-G1 4052899918481 4052899918603 20 PL-CN50-900-830-40D-G1 4052899918498 4052899918610 20 PL-CN50-900-840-40D-G1 4052899918504 4052899918627 20 PL-CN50-1100-830-24D-G1 4052899918511 4052899918634 20 PrevaLED® COIN 50 PL-CN50-1100-840-24D-G1 4052899918528 4052899918641 20 PrevaLED® COIN 50 PL-CN50-1100-830-40D-G1 4052899918535 4052899918658 20 PrevaLED® COIN 50 PL-CN50-1100-840-40D-G1 4052899918542 4052899918665 20 Sales and Technical Support OSRAM Asia Pacific 30th Floor, China Resource Building, 26 Harbour Road, Wanchai, Hong Kong Sales and technical support is given by the local OSRAM subsidiaries. Complete subsidiaries listing is available at OSRAM homepage. +852 3652 5678 www.osram.com PrevaLED® COIN 50 – 18.08.2013 Page 5 OSRAM Application Note OTe 15/350 PC OTe 25 CS OTe 15 CS OTe 13 PC OTe 18 PC OTi DALI 25/700 LT2 Dimming PC N.A N.A. PC PC DALI Drivers Typ. Current [mA] Recommended OPTOTRONIC® devices Modules PL-CN50-700 350 PL-CN50-900 350 PL-CN50-1100 350 B Connection Type A A B B A Jul. 2014 Driver Availability Reference Connection Diagrams CAUTION The following diagrams are for reference only. Please refer to Instruction Sheet of power supply/ dimmer/ controller for details. Disconnected from mains supply before wiring work. Wrong polarity will destroy the module and result in no light emission. Type A: 1-to-1 connection L 220-240V ac N PrevaLED® COIN 50 – 18.08.2013 Constant Current Power Supply Page 6 + - Links and related further information OSRAM LED Systems OSRAM catalogue General information www.osram.com/prevaled catalog.osram.com www.osram.com OSRAM Type B: 1-to-1 connection with Phase Cut dimming Phase Cut Dimmer L 220-240V ac N Phase cut dimmable Constant Current Power Supply + - Remark: - 1pc OTe PC driver for 1pc PL-CN50 @350mA - Dimming by reduce output current Sales and technical support OSRAM GmbH Marcel-Breuer-Straße 6 80807 Munich, Germany www.osram.com +49.89.6213-0 (Headquarter) +49.89.6213-6000 (Customer-Service-Center) Sales and technical support is given by the local OSRAM subsidiaries. On the OSRAM website all subsidiaries are listed with complete address and phone numbers. Links and related further information OSRAM LED Systems OSRAM catalogue General information PrevaLED® COIN 50 – 18.08.2013 www.osram.com/prevaled catalog.osram.com www.osram.com Page 7