SAW Components SAW Duplexer W-CDMA Band 1 Series/type: Ordering code: B8518 B39212B8518P810 Date: Version: July 21, 2014 2.1 EPCOS AG 2014. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Revision History Changes compared to previously issued iteration Issue 1.0 1.1 2.0 2.1 Originator C. Math N. Fichtner N. Fichtner N. Fichtner Detailed specification changes Initial release Add IMD limits Add maximum ratings Corr. Pin elsewhere Please read cautions and warnings and important notes at the end of this document. 2 July 21, 2014 Date Mar 06, 2013 Apr 09, 2013 Mar 28, 2014 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Application ■ Low-loss SAW duplexer for mobile telephone W-CDMA Band 1 (UMTS) systems Low insertion attenuation Low amplitude ripple Usable passband 60 MHz High isolation between Tx and Rx External ANT-coil Features 0.3 1 0.7 Package size 1.8 x 1.4 mm2 max. Package height 0.475mm RoHS compatible Approximate weight 0.005 g Package for Surface Mount Technology (SMT) Ni terminals, Au-plated Electrostatic Sensitive Device (ESD) Fully matched by integrated matching network Moisture Sensitive Level 3 0.35 2 3 4 8 7 0.475 max. ■ ■ ■ ■ ■ ■ ■ ■ ■ 6 5 0.25 0.25 ■ ■ ■ ■ ■ bottom view side view 1.8 1.4 7 Pin configuration 3 6 1 2, 4, 5, 7, 8 Tx input Antenna Rx output To be grounded Please read cautions and warnings and important notes at the end of this document. 3 5 8 4 1 ■ ■ ■ ■ 6 July 21, 2014 2 3 top view SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 3.1nH ZRx = 50 Ω || 5.7nH Characteristics Tx-Antenna min. Center frequency fc Maximum insertion attenuation 1922.4 ... 1977.6 αW-CDMA1) Amplitude ripple (p-p) 1922.4 ... 1977.6 B8518 typ. @ 25 ˚C max. MHz MHz - 1.4 1.9 dB - 0.5 1.0 dB % αW-CDMA1) MHz EVM2) Error Vector Magnitude 1922.4 ... 1977.6 MHz - 2.1 2.9 TX port VSWR 1920.0 ... 1980.0 MHz - 1.6 2.1 ANT port VSWR 1920.0 ... 1980.0 MHz - 1.5 2.1 32 45 35 36 38 38 39 28 22 15 42 31 25 19 7 38 50 41 41 41 42 42 31 24 23 46 35 31 24 12 - Attenuation 1) 2) α 10.0 ... 1574.0 MHz 420.0 ... 494.0 MHz 843.0 ... 894.0 MHz 1565.42 ... 1573.374 MHz 1573.374... 1577.466 MHz 1577.466... 1585.42 MHz 1597.5515...1605.886MHz 1605.886... 1805.0 MHz 1805.0 ... 1865.0 MHz 1865.0 ... 1880.0 MHz 2112.4 ... 2167.6 MHz αW-CDMA1) 2400.0 ... 2500.0 MHz 2620.0 ... 2690.0 MHz 3830.0 ... 3970.0 MHz 5150.0 ... 5950.0 MHz dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 8 of this document. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 Please read cautions and warnings and important notes at the end of this document. 4 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 3.1nH ZRx = 50 Ω || 5.7nH Characteristics Antenna-Rx min. Center frequency fc Maximum insertion attenuation 2112.4 ... 2167.6 αW-CDMA1) Amplitude ripple (p-p) 2112.4 ... 2167.6 B8518 typ. @ 25 ˚C max. MHz MHz - 1.9 2.5 dB - 0.5 1.0 dB % αW-CDMA1) MHz EVM2) Error Vector Magnitude 2112.4 ... 2167.6 MHz - 0.8 2.0 ANT port VSWR 2110.0 ... 2170.0 MHz - 1.4 1.8 RX port VSWR 2110.0 ... 2170.0 MHz - 1.5 1.9 at fTX=1950.0 MHz, fRX=2140.0 MHz Blocker 1 190.0 MHz Blocker 2 1760.0 MHz Blocker 3 4090.0 MHz - 115 100 105 IMD product level limits3) 1) 2) 3) dBm dBm dBm Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 8 of this document. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141 IMD product level limits for power levels PTX=21.5 dBm (antenna port output power) and PBlocker=-15dBm (antenna port input power) Please read cautions and warnings and important notes at the end of this document. 5 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 3.1nH ZRx = 50 Ω || 5.7nH Characteristics Antenna-Rx Attenuation 10.0 1922.4 1980.0 2255.0 2400.0 2484.0 1) ... ... ... ... ... ... 1920.0 1977.6 2025.0 2400.0 2484.0 6000.0 α MHz MHz αW-CDMA1) MHz MHz MHz MHz min. B8518 typ. @ 25 ˚C max. 40 50 40 20 40 30 48 59 43 50 49 38 - dB dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 8 of this document. Please read cautions and warnings and important notes at the end of this document. 6 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Characteristics Temperature range for specification: TX terminating impedance: ANT terminating impedance: RX teminating impedance: T = –30 ˚C to +85 ˚C ZTx = 50 Ω ZAnt = 50 Ω || 3.1nH ZRx = 50 Ω || 5.7nH Characteristics Tx-Rx Isolation 1574.0 1922.4 2112.4 3830.0 5750.0 1) ... ... ... ... ... 1577.0 1977.6 2167.6 3970.0 5950.0 α MHz MHz αW-CDMA1) MHz αW-CDMA1) MHz MHz min. B8518 typ. @ 25 ˚C max. 50 51 47 30 30 64 56 57 52 48 - dB dB dB dB dB Attenuation of W-CDMA signal (Power Transfer Function). Please, refer to page 8 of this document. Please read cautions and warnings and important notes at the end of this document. 7 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Annotation for characteristics section Attenuation of W-CDMA signal (Power Transfer Function, αW-CDMA) is determined by ∞ ∫–∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df with fCarrier according to 3GPP TS 25.101 (e.g. for UMTS pass band, fCarrier ranges from 1922.4 MHz (lowest Tx channel) to 2167.6 MHz (highest Tx channel)). Here, HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ HRRC ( f ) 2 df = 1 Maximum Ratings Storage temperature range DC voltage ESD voltage Input power at 1922.4 ... 1977.6 MHz elsewhere 1) 2) Tstg VDC VESD Pin Pin –40/+85 51) 502) 28 10 ˚C V V dBm dBm machine model, 10 pulses } W-CDMA signal 50 ˚C, 5000h 168h damp heat steady state according to IEC 60068-2-67 cy According to JESD22-A115B (machine model), 10 negative and 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Frequency Response TX-ANT (CW signal) Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 9 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Frequency Response RX-ANT (CW signal) Frequency Response RX-ANT (wideband) Storage temperature range DC voltage ESD voltage Input power at 1920.0 ... 1980.0 MHz elsewhere 1) Tstg VDC VESD Pin Pin –40/+85 t.b.d. 501) t.b.d. t.b.d. ˚C V V dBm dBm machine model, 10 pulses } continuous wave 50 ˚C, 5000h According to JESD22-A115A (machine model), 10 negative and 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 10 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Frequency Response TX-RX (CW signal) Frequency Response TX-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 11 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet Return Loss S11 TX-port S22 ANT-port Please read cautions and warnings and important notes at the end of this document. 12 S33 RX-port July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet References Type B8518 Ordering code B39212B8518P810 Marking and package Packaging Date codes L_1126 S-parameters Soldering profile S_6001 RoHS compatible Defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 13 July 21, 2014 SAW Components B8518 SAW Duplexer 1950.0 / 2140.0 MHz Data Sheet The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Please read cautions and warnings and important notes at the end of this document. 14 July 21, 2014