SAW Components
SAW Duplexer
Automotive telematics
Series/type:
Ordering code:
B4403
B39212B4403P810
Date:
Version:
March 25, 2015
2.3
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Application
■ Low-loss SAW duplexer for
WCDMA Band 4 / CDMA 1x AWS systems
Low insertion attenuation
Low amplitude ripple
Usable passband 45 MHz
Single-ended to balanced transformation in Antenna-Rx path
■ Impedance transformation 50Ω to 100Ω in AntennaRx path
■ High isolation between Tx and Rx
■
■
■
■
0.43
0.33
1
2
3
7
6
5
0.7
bottom view
0.29
8
4
9
0.29
Package size 2.0 * 1.6 mm2
Package height max. 0.45 mm
RoHS compatible
Approx. weight 0.005 g
Package for Surface Mount Technology (SMT)
Ni terminals, Au-plated
Electrostatic Sensitive Device (ESD)
AEC-Q200 qualified component family (operable
temperature range –40˚C to +85˚C)
0.45 max.
■
■
■
■
■
■
■
■
0.35
Features
side view
2.0
5
4
6
8
1.6
7
1
2
top view
3
Pin configuration
■
■
■
■
3
1, 8
6
2, 4, 5, 7, 9
1
Tx input
Rx output (balanced)
Antenna
To be grounded
3
8
4,5,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
2
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
TX terminating impedance:
RX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 2.4 nH
ZTX =
50 Ω || 10 nH
ZRX = 100 Ω (balanced) || 14 nH
Characterisitcs TX - Antenna
min.
Center frequency
typ.
@ 25 ˚C
1732.5
max.
—
1.5
2.5
dB
dB
fC
MHz
α
Maximum insertion attenuation
1710.0 ... 1755.0
MHz
Amplitude ripple (p-p)
1710.0 ... 1755.0
MHz
—
0.5
1.5
Input VSWR (TX port)
1710.0 ... 1755.0
MHz
—
1.4
2.0
Output VSWR (ANT port)
1710.0 ... 1755.0
MHz
—
1.4
2.0
∆α
α
Attenuation
100.0
851.0
1310.0
1565.42
1597.55
... 764.0
... 894.0
... 1355.0
... 1585.42
... 1605.88
MHz
MHz
MHz
MHz
MHz
35
35
24
40
40
45
42
38
47
47
—
—
—
—
—
dB
dB
dB
dB
dB
1805.0
1930.0
2110.0
2400.0
2565.0
3410.0
...
...
...
...
...
...
MHz
MHz
MHz
MHz
MHz
MHz
20
40
45
30
25
25
46
48
49
39
36
32
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
1880.0
1990.0
2155.0
2500.0
2677.0
3510.0
Please read cautions and warnings and
important notes at the end of this document.
3
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
TX terminating impedance:
RX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 2.4 nH
ZTX =
50 Ω || 10 nH
ZRX = 100 Ω (balanced) || 14 nH
Characterisitcs Antenna - Rx
Center frequency
Maximum insertion attenuation
2110.0 ... 2155.0
min.
typ.
@ 25 ˚C
2132.5
max.
—
1.9
2.5
dB
dB
fC
α
MHz
MHz
∆α
Amplitude ripple (p-p)
2110.0 ... 2155.0
MHz
—
0.4
1.2
Input VSWR (RX port)
2110.0 ... 2155.0
MHz
—
1.4
2.0
Output VSWR (ANT port)
2110.0 ... 2155.0
MHz
—
1.6
2.0
CMRR (|S32-S42|/|S32+S42|)
2110.0 ... 2155.0
MHz
20
23
—
dB
α
Attenuation
100.0
400.0
1355.0
1710.0
1755.0
1955.0
...
...
...
...
...
...
400.0
1355.0
1710.0
1755.0
1955.0
2025.0
MHz
MHz
MHz
MHz
MHz
MHz
57
45
35
45
35
15
75
64
46
58
50
37
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
2240.0
2300.0
2400.0
2690.0
3300.0
3820.0
3910.0
4220.0
...
...
...
...
...
...
...
...
2300.0
2400.0
2690.0
3300.0
3800.0
3910.0
4220.0
4310.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
15
30
40
35
45
40
35
40
38
45
48
45
49
48
47
46
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
Please read cautions and warnings and
important notes at the end of this document.
4
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
TX terminating impedance:
RX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 2.4 nH
ZTX =
50 Ω || 10 nH
ZRX = 100 Ω (balanced) || 14 nH
Characterisitcs Tx - Rx
Differential Mode Isolation
1574.0 ...
1710.0 ...
2110.0 ...
3410.0 ...
min.
typ.
@ 25 ˚C
max.
40
53
48
20
69
57
56
66
—
—
—
—
dB
dB
dB
dB
44
47
—
dB
α
1577.0
1755.0
2155.0
3520.0
MHz
MHz
MHz
MHz
Common Mode Isolation
1710.0 ... 1755.0
MHz
α
Maximum Ratings
Operable temperature range
Storage temperature range
DC voltage
T
Tstg
VDC
Input power at
1710.0 ... 1755.0 MHz
elsewhere
PIN
Please read cautions and warnings and
important notes at the end of this document.
–40/+85
–40/+85
0
29
10
5
˚C
˚C
V
dBm
dBm
source and load impedance 50 Ω
continuous wave
50 ˚C, 5000 h
}
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Frequency Response TX-ANT
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
6
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Frequency Response RX-ANT
Frequency Response RX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
7
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Frequency Response TX-RX (Differential Mode)
Frequency Response TX-RX (Common Mode)
Please read cautions and warnings and
important notes at the end of this document.
8
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
Return Loss
S11 TX- port
S33 RX-port
Please read cautions and warnings and
important notes at the end of this document.
S22 ANT-port
9
March 25, 2015
SAW Components
B4403
SAW Duplexer
1732.5 / 2132.5 MHz
Data sheet
References
Type
B4403
Ordering code
B39212B4403P810
Marking and package
C61157-A8-A50
Packaging
F61074-V8247-Z000
Date codes
L_1126
S-parameters
B4403_NB_UN.s4p B4403_WB_UN.s4p
See file header for port/pin assignment table.
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2015. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
10
March 25, 2015
Important notes
The
The following
following applies
applies to
to all
all products
products named
named in
in this
this publication:
publication:
1.
1. Some
Some parts
parts of
of this
this publication
publication contain
contain statements
statements about
about the
the suitability
suitability of
of our
our products
products for
for
certain
areas
of
application.
These
statements
are
based
on
our
knowledge
certain areas of application. These statements are based on our knowledge of
of typical
typical
requirements
requirements that
that are
are often
often placed
placed on
on our
our products
products in
in the
the areas
areas of
of application
application concerned.
concerned. We
We
nevertheless
expressly
point
out
that
such
statements
cannot
be
regarded
nevertheless expressly point out that such statements cannot be regarded as
as binding
binding
statements
statements about
about the
the suitability
suitability of
of our
our products
products for
for a
a particular
particular customer
customer application.
application.
As
a
rule,
EPCOS
is
either
unfamiliar
with
individual
customer
applications
As a rule, EPCOS is either unfamiliar with individual customer applications or
or less
less familiar
familiar
with
them
than
the
customers
themselves.
For
these
reasons,
it
is
always
ultimately
with them than the customers themselves. For these reasons, it is always ultimately
incumbent
incumbent on
on the
the customer
customer to
to check
check and
and decide
decide whether
whether an
an EPCOS
EPCOS product
product with
with the
the
properties
described
in
the
product
specification
is
suitable
for
use
in
a
particular
customer
properties described in the product specification is suitable for use in a particular customer
application.
application.
2.
2. We
We also
also point
point out
out that
that in
in individual
individual cases,
cases, a
a malfunction
malfunction of
of electronic
electronic components
components or
or
failure
before
the
end
of
their
usual
service
life
cannot
be
completely
ruled
failure before the end of their usual service life cannot be completely ruled out
out in
in the
the
current
current state
state of
of the
the art,
art, even
even if
if they
they are
are operated
operated as
as specified.
specified. In
In customer
customer applications
applications
requiring
a
very
high
level
of
operational
safety
and
especially
in
customer
requiring a very high level of operational safety and especially in customer applications
applications in
in
which
the
malfunction
or
failure
of
an
electronic
component
could
endanger
human
life
or
which the malfunction or failure of an electronic component could endanger human life or
health
health (e.g.
(e.g. in
in accident
accident prevention
prevention or
or life-saving
life-saving systems),
systems), it
it must
must therefore
therefore be
be ensured
ensured by
by
means
of
suitable
design
of
the
customer
application
or
other
action
taken
by
the
customer
means of suitable design of the customer application or other action taken by the customer
(e.g.
(e.g. installation
installation of
of protective
protective circuitry
circuitry or
or redundancy)
redundancy) that
that no
no injury
injury or
or damage
damage is
is sustained
sustained
by
third
parties
in
the
event
of
malfunction
or
failure
of
an
electronic
component.
by third parties in the event of malfunction or failure of an electronic component.
3.
3. The
The warnings,
warnings, cautions
cautions and
and product-specific
product-specific notes
notes must
must be
be observed.
observed.
4.
In
order
to
satisfy
certain
technical
requirements,
some
of
the
products
4. In order to satisfy certain technical requirements, some of the products described
described in
in this
this
publication
may
contain
substances
subject
to
restrictions
in
certain
jurisdictions
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
(e.g.
because
because they
they are
are classed
classed as
as hazardous).
hazardous). Useful
Useful information
information on
on this
this will
will be
be found
found in
in our
our
Material
Data
Sheets
on
the
Internet
(www.epcos.com/material).
Should
you
have
any
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
more
detailed
detailed questions,
questions, please
please contact
contact our
our sales
sales offices.
offices.
5.
We
constantly
strive
to
improve
our
products.
5. We constantly strive to improve our products. Consequently,
Consequently, the
the products
products described
described in
in this
this
publication
may
change
from
time
to
time.
The
same
is
true
of
the
corresponding
product
publication may change from time to time. The same is true of the corresponding product
specifications.
specifications. Please
Please check
check therefore
therefore to
to what
what extent
extent product
product descriptions
descriptions and
and specifications
specifications
contained
in
this
publication
are
still
applicable
before
or
when
you
place
an
order.
contained in this publication are still applicable before or when you place an order.
We
We also
also reserve
reserve the
the right
right to
to discontinue
discontinue production
production and
and delivery
delivery of
of products.
products. ConseConsequently,
we
cannot
guarantee
that
all
products
named
in
this
publication
will
always
quently, we cannot guarantee that all products named in this publication will always be
be
available.
available. The
The aforementioned
aforementioned does
does not
not apply
apply in
in the
the case
case of
of individual
individual agreements
agreements deviating
deviating
from
from the
the foregoing
foregoing for
for customer-specific
customer-specific products.
products.
6.
Unless
otherwise
agreed
6. Unless otherwise agreed in
in individual
individual contracts,
contracts, all
all orders
orders are
are subject
subject to
to the
the current
current
version
of
the
“General
Terms
of
Delivery
for
Products
and
Services
in
the
Electrical
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry”
Industry” published
published by
by the
the German
German Electrical
Electrical and
and Electronics
Electronics Industry
Industry Association
Association
(ZVEI).
(ZVEI).
7.
7. The
The trade
trade names
names EPCOS,
EPCOS, Alu-X,
Alu-X, CeraDiode,
CeraDiode, CeraLink,
CeraLink, CeraPad,
CeraPad, CeraPlas,
CeraPlas, CSMP,
CSMP, CSSP,
CSSP,
CTVS,
DeltaCap,
DigiSiMic,
DSSP,
ExoCore,
FilterCap,
FormFit,
LeaXield,
MiniBlue,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,
MiniCell,
MiniCell, MKD,
MKD, MKK,
MKK, MotorCap,
MotorCap, PCC,
PCC, PhaseCap,
PhaseCap, PhaseCube,
PhaseCube, PhaseMod,
PhaseMod, PhiCap,
PhiCap, PQSine,
PQSine,
SIFERRIT,
SIFI,
SIKOREL,
SilverCap,
SIMDAD,
SiMic,
SIMID,
SineFormer,
SIOV,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5D,
SIP5K,
SIP5K, TFAP,
TFAP, ThermoFuse,
ThermoFuse, WindCap
WindCap are
are trademarks
trademarks registered
registered or
or pending
pending in
in Europe
Europe and
and
in
other
countries.
Further
information
will
be
found
on
the
Internet
in other countries. Further information will be found on the Internet at
at
www.epcos.com/trademarks.
www.epcos.com/trademarks.
11
March 25, 2015