SAW Components
SAW Duplexer for Smallcell
Band 17 (3G/LTE)
Series/type:
Ordering code:
B8017
B39741B8017P810
Date:
Version:
February 25, 2015
2.3
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Application
■ Low-loss SAW duplexer for 3G/LTE smallcell sys■
■
■
■
■
■
■
tems (Band 17)
Low insertion attenuation
Low amplitude ripple
Usable passband 12 MHz
High power durability
Industrial qualification
Rx = Uplink = 704-716 MHz
Tx = Downlink = 734-746 MHz
Features
■
■
■
■
■
■
■
Package size 2.5 * 2.0 mm2
max. Package height 0.5 mm
RoHS compatible
Package for Surface Mount Technology (SMT)
Ni, Au-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sentivity Level 3
Pin configuration
■
■
■
■
3
1
6
2, 4, 5, 7, 8, 9
3
RX output
TX input
Antenna
To be grounded
1
4,5,9
2,7,8
6
Please read cautions and warnings and
important notes at the end of this document.
2
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –10 ˚C to +85 ˚C
ZANT= 50 Ω || 30 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs ANT - RX
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
710.0
—
MHz
—
2.0
3.2
dB
—
0.6
2.0
dB
%
αmax
Maximum insertion attenuation
704.0 ... 716.0
MHz
Amplitude ripple (p-p)
704.0 ...
MHz
∆α
716.0
EVM1)
Error Vector Magnitude
@fcarrier 706.5 ...
713.5
MHz
—
2.3
3.8
Input VSWR (ANT port)
704.0 ...
716.0
MHz
—
1.5
1.7
Output VSWR (RX port)
704.0 ...
716.0
MHz
—
1.6
1.8
600.0
697.75
700.0
704.0
722.2
724.0
728.0
734.0
746.0
756.0
768.0
894.0
1432.0
1990.0
2170.0
2500.0
2864.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
40
10
1.5
1
1
7
15
35
50
48
45
40
50
45
45
45
45
15
55
20
12
2
2
16
17
55
55
56
49
50
60
56
56
56
57
26
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10.0
693.25
699.0
700.0
716.0
722.2
724.0
729.0
734.0
746.0
758.0
869.0
1408.0
1930.0
2110.0
2400.0
2816.0
3000.0
1)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141
Please read cautions and warnings and
important notes at the end of this document.
3
February 25, 2015
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –10 ˚C to +85 ˚C
ZANT= 50 Ω || 30 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - ANT
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
740.0
—
MHz
—
1.6
2.2
dB
—
0.5
1.1
dB
%
αmax
Maximum insertion attenuation
734.0 ... 746.0
MHz
Amplitude ripple (p-p)
734.0 ...
MHz
∆α
746.0
EVM1)
Error Vector Magnitude
@fcarrier 736.5 ...
743.5
MHz
—
1.7
3.8
Input VSWR (TX port)
734.0 ...
746.0
MHz
—
1.5
1.8
Output VSWR (ANT port)
734.0 ... 746.0
MHz
—
1.3
1.7
30
50
50
40
40
40
40
45
40
40
30
35
20
10
10
43
54
54
55
50
46
52
53
52
48
43
42
40
21
15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10.0
699.0
704.0
777.0
788.0
824.0
1468.0
1574.0
1710.0
1850.0
2202.0
2400.0
2936.0
3000.0
5000.0
1)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
600.0
704.0
716.0
787.0
798.0
849.0
1492.0
1606.0
1755.0
1915.0
2238.0
2500.0
2984.0
5000.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141
Please read cautions and warnings and
important notes at the end of this document.
4
February 25, 2015
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –10 ˚C to +85 ˚C
ZANT= 50 Ω || 30 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characteristics TX-RX
min.
typ.
@ 25 ˚C
max.
53
53
58
58
—
—
α
Attenuation
704.0
734.0
...
...
716.0
746.0
MHz
MHz
dB
dB
Maximum Ratings
Storage temperature range
DC voltage
ESD voltage
Input power at pin 1
734.0 ...746.0 MHz
Tstg
VDC
VESD
Pin
–40/+85
0
501)
˚C
V
V
282)
dBm
10
dBm
machine model, 1 pulse
source and load impedance 50 Ω
Pin 28 dBm average 39 dBm peak
}
LTE 5 MHz downlink
T = 55˚C, 100.000 h
elsewhere
Pin
Operating lifetime with Output
power at antenna
734.0 ...746.0 MHz
1)
2)
3)
Pout
source and load impedance 50 Ω
243)
dBm
Continuous wave T=55˚C,
100khrs
According to JESD22-A115A (machine model), 1 negative and 1 positive pulses.
Time to failure (TTDF) according to accelerated power durability tests, and wear out models.
according to accelerated High Temperature Operating Life (HTOL) test.
Please read cautions and warnings and
important notes at the end of this document.
5
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Frequency Response ANT-RX
Frequency Response ANT-RX
Please read cautions and warnings and
important notes at the end of this document.
6
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Frequency Response TX-ANT
Frequency Response TX-ANT
Please read cautions and warnings and
important notes at the end of this document.
7
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
Frequency Response TX-RX
Frequency Response TX-RX
Please read cautions and warnings and
important notes at the end of this document.
8
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
S11 VSWR (RX)
S22 VSWR (ANT)
S33 VSWR (TX)
Please read cautions and warnings and
important notes at the end of this document.
9
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
EVM RX
EVM TX
Please read cautions and warnings and
important notes at the end of this document.
10
February 25, 2015
SAW Components
B8017
710.0 / 740.0 MHz
SAW Duplexer
Data sheet
References
Type
B8017
Ordering code
B39741B8017P810
Marking and package
C61157-A3-A27
Packaging
F61074-V8232-Z000
Date codes
L_1126
S-parameters
B8017_NB.s3p, B8017_WB.s3p
See file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2015. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11
February 25, 2015
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,
MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
12
February 25, 2015