V950ME38-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipment • Satellite Communications £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] • Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 4900 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -79 Harmonic Suppression (2nd) -25 Tuning Voltage 0 Max Units 6500 MHz dBc/Hz -20 dBc 20 Vdc MHz/V 160 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing 22 MHz/V Pulling (12 dB Return Loss, Any Phase) 15 MHz 75 °C Max Units Power Output 1 Load Impedance Operating Temperature Range 50 -20 Package Style Power Supply Requirements 5 MINI-16HL-SM Min Typ Supply Voltage (Vcc, nom.) 12 Supply Current (Icc) 40 Vdc 50 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V950ME38-LF Rev A1 Tuning Curve, typ. 6700 FREQUENCY (MHz) 6500 6300 6100 75 °C 25 °C 5900 5700 5500 -20 °C 5300 5100 4900 4700 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6 4759 Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0.030 MIN. CUTBACK FROM LIVE PADS 5214 5649 6001 6257 6414 6488 6527 6546 6561 6574 FREQUENCY (MHz) 75 °C 25 °C -20 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B