RFS2950A-LF Rev A1 Fixed Frequency Synthesizer Surface Mount Module Applications Application Notes • Test Instrumentation • Up/Down Converters • Radar Systems Performance Specifications Frequency • AN-107: Manual Soldering Technique • AN-205: Measuring Phase Noise for SFS Series Min Typ 2950 Max Units 2950 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -95 dBc/Hz Harmonic Suppression (2nd) -20 dBc Spurious Suppression -65 dBc dBm Power Output 1 3 Load Impedance 50 Settling Time 3 Operating Temperature Range -40 Package Style 5 mS 85 °C RFS-V12N Power Supply Requirements Min Typ Max Units Supply Voltage 1: PLL (Vcc, nom) 3.0 3 3.5 Vdc Supply Voltage 2: VCO (Vcc, nom) 4.80 5 5.15 Vdc Supply Current 1: PLL (Icc, typ) 12 mA Supply Current 2: VCO (Icc, typ) 30 mA Internal Reference Oscillator Signal Frequency Frequency Stability Min Typ Max Units 10 MHz ±10 ppm Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. 14118 Stowe Drive, Suite B | Poway, CA 92064 | TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com | EMAIL: [email protected] Page 1 of 2 FRM-S-002 B Fixed Frequency Synthesizer Surface Mount Module Phase Noise, typ. RFS2950A-LF Rev A1 Footprint £(f) (dBc/Hz) PHASE NOISE (1 Hz BW, typical) OFFSET (Hz) Physical Dimensions LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. URL: www.zcomm.com | EMAIL: [email protected] Page 2 of 2 FRM-S-002 B