RFM products are now Murata products. SF1111A • • • • • Designed for CDMA2000 BTS Applications Simple External Impedance Matching Hermetic SMP-97 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) Pb Absolute Maximum Ratings Rating 160 MHz SAW Filter Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC -40 to +85 °C Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile 260°C for 30 s SMP-97 Electrical Characteristics Characteristic Sym Notes Nominal Center Frequency fC 1 Passband Insertion Loss at fc Min Typ BW1.5 3 dB Passband BW3 1, 2 Operating Temperature Range TA kHz 0.7 1.0 dB 10 20 degP-P 40 1, 2, 3 fc-20 to fc-10.0 and fc+10.0 to fc+20 MHz dB ±750 Phase Linearity over fc ±590 kHz fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 MHz 11.0 ±590 Amplitude Ripple over fc ±470 kHz Rejection Units MHz 9 IL 1.5 dB Passband Max 160.000 dB 50 1 +70 -20 Impedance Matching to 50 Ω Unbalanced °C External L-C Case Style SMP-97 24.6 x 9 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) RFM SF1111A YYWW CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. 4. 5. 6. 7. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. ©2010-2014 by Murata Electronics N.A., Inc. SF1111A (R) 3/18/14 Page 1 of 4 Electrical Connections Connection Terminals Port 1 Hot 10 Port 1 Gnd Return 1 Port 2 Hot 5 Port 2 Gnd Return 6 Case Ground All others www.murata.com 7 Dec 2007 13:40:32 CH1 S11 1 U FS -12 . 555 1 : 52 . 115 160 . 000 000 MHz SF1111A DEMO # 3 79 . 231 CH3 S22 1 : 45 . 631 160 . 000 000 pF 1 U FS 0 . 7227 MHz 718 . 84 pH FULL 2 PORTS CAL. 1 1 PRm Cor Cor Full CENTR CH2 160 . 000 S21 MHz LOG SPAN 2 . 000 10 dB/ MHz CENTR REF -20 dB 160 . 000 1 : 0 . 0000 MHz dB SPAN 0 . 000 2 . 000 000 MHz MHz 1 CH2 3 Cor 2 4 BW : Resp cent : Markers REF=1 1 . 433757 MHz 160 . 034548 MHz Q: 111 . 62 PRm 1_ loss CENTER 160 . 000 000 ©2010-2014 by Murata Electronics N.A., Inc. SF1111A (R) 3/18/14 MHz SPAN Page 2 of 4 10 . 000 000 : -9 . 3580 dB MHz www.murata.com 7 Dec 2007 13:40:04 CH1 S21 DEL 700 ns/ REF 3 us 2 : -275 . 54 ns 1 . 180 000 MHz SF1111A DEMO # 3 THRU CAL. CH1 Smo Markers REF=1 mean : 3 . 4409 us s . dev : 63 . 113 ns : 276 . 79 ns 2 Cor 1 p-p PRm Resp CH2 S21 LOG 1 dB/ REF -8 dB 2 : - . 03910 dB . 940 000 MHz CH2 Cor 2 Resp 1 Markers REF=1 mean : -9 . 4556 dB s . dev : . 19950 dB p-p : . 72290 dB PRm CH2 CENTER 160 . 000 ©2010-2014 by Murata Electronics N.A., Inc. SF1111A (R) 3/18/14 000 MHz SPAN Page 3 of 4 2 . 000 000 MHz www.murata.com SMP-97 Case 10-Terminal Ceramic Surface-Mount Case 24.6 x 9 mm Nominal Footprint Case Dimensions mm Dimension A B C D E H M N P Inches Min Nom Max Min Nom Max 24.41 8.80 24.64 8.99 1.75 2.29 1.02 1.0 4.83 3.40 1.905 24.94 9.30 2.00 0.961 0.349 0.970 0.354 0.069 0.090 0.040 0.039 0.190 0.134 0.075 0.982 0.366 0.079 Electrical Connections Connection Port 1 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80-200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground Al2O3 Ceramic All others Single Ended Operation Pb Free Return is ground Differential Operation C B D Return is hot N H M A 6 5 5 6 7 4 4 7 8 3 3 8 9 2 2 9 10 1 1 10 P (8 Places) E (10 Places) TOP VIEW ©2010-2014 by Murata Electronics N.A., Inc. SF1111A (R) 3/18/14 BOTTOM VIEW Page 4 of 4 www.murata.com