Formosa MS Effciency Fast Rectifiers EF1605CT THRU EF1660CT List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Tube packing.................................................................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6 Formosa MS Effciency Fast Rectifiers EF1605CT THRU EF1660CT 16.0A Glass Passivated Effcienct Fast Rectifiers-50-600V Features Package outline • Reverse recovery time less than 25ns • Dual rectifier construction, positive centetap, offers 8.0A TO-220AB half wave and16.0A full wave rectification. • High current capability. • Low reverse leakage current. • High surge capability. • Glass passivated chip junction. • Low forward drop down voltage. • High reliability. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen-free parts, ex. ΕF1605CT-H 0.419(10.66) 0.387(9.85) 0.196(5.00) 0.163(4.16) 0.054(1.39) 0.045(1.15) 0.269(6.85) 0.226(5.75) 0.624(15.87) 0.548(13.93) 0.139(3.55) MIN 1 2 3 0.177(4.50)MAX Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : JEDEC TO-220AB molded plastic body over 0.038(0.96) 0.019(0.50) 0.50(12.70)MIN passivated chip • Lead : Axial leads, solderable per MIL-STD-202, 0.1(2.54) 0.025(0.65)MAX Method 208 guranteed PIN 1 PIN 3 • Polarity: As marked • Mounting Position : Any • Weight : Approximated 2.10gram Maximum ratings (AT PIN 2 Dimensions in inches and (millimeters) T A=25 oC unless otherwise noted) SYMBOLS EF1605CT EF1610CT EF1620CT EF1640CT EF1660CT UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 V PARAMETER Maximum average forward rectified current IO 16 A Peak forward surge current 8.3ms single half sine-wave(JEDEC method) IFSM 100 A Typical diode junction capacitance (Note 1) CJ 30 pF Operating junction temperature range TJ -55 to +150 °C Storage temperature range TSTG -65 to +175 °C Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) SYMBOLS EF1605CT EF1610CT EF1620CT EF1640CT EF1660CT UNIT 1.25 1.75 V Maximum forward voltage per leg at IF=8A VF Maximum DC reverse current at TJ =25°C at rated DC blocking voltage per leg at TJ =125°C IR 5.0 250 uA uA Maximum reverse recovery time per leg (Note 2) trr 25 ns 0.875 Thermal Characteristics PARAMETER Typical thermal resistance junction to case per leg SYMBOLS EF1605CT RθJC EF1610CT EF1620CT EF1640CT EF1660CT UNIT °C/W 2.0 Note 1: Measure at 1 MHz and applied reverse voltage of 4.0 V D.C. Note 2: Reverse recovery time test condition, IF=0.5A, IR=1.0A, IRR=0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6 Rating and characteristic curves (EF1605CT THRU EF1660CT) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-TYPICAL FORWARD CHARACTERISTICS 20.0 AVERAGE FORWARD CURRENT,(A) 100 0 0 20 40 60 80 100 120 140 160 180 200 CASE TEMPERATURE,TC( C) FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT F1 62 0C T 3.0 T 0C EF 16 60 CT 4.0 10 64 8.0 EF 1 12.0 EF 16 05 CT ~E INSTANTANEOUS FORWARD CURRENT,(A) 16.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle 0.1 PEAK FORWARD SURGE CURRENT,(A) 100 8.3ms Single Half .01 80 Sine Wave .4 .6 .8 JEDEC method 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE,(V) 60 40 20 FIG.4 - TYPICAL REVERSE 0 CHARACTERISTICS 1 5 50 10 100 1000 REVERSE LEAKAGE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz FIG.5- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS trr 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) 0 PULSE GENERATOR -0.25A (NOTE 2) (+) 25Vdc (approx.) D.U.T. ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A (+) 2. Rise Time= 10ns max., Source Impedance= 50 ohms. TJ=125°C 10 TJ=25°C 1 0.1 OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6 Formosa MS Effciency Fast Rectifiers EF1605CT THRU EF1660CT Pinning information Pin Pin1 Pin2 Pin3 Simplified outline anode cathode anode 1 2 Symbol PIN 1 PIN 3 3 PIN 2 Marking Type number Marking code EF1605CT EF1610CT EF1620CT EF1640CT EF1660CT EF1605CT EF1610CT EF1620CT EF1640CT EF1660CT Tube packing PACKAGE TO-220AB TUBE (pcs) 50 TUBE SIZE (m/m) 525*32*7.5 BOX (pcs) INNER BOX (m/m) 1000 555*150*40 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 CARTON SIZE (m/m) 580*230*175 Page 4 CARTON (pcs) 5,000 APPROX. GROSS WEIGHT (kg) 15.0 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6 Formosa MS Effciency Fast Rectifiers EF1605CT THRU EF1660CT Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6 Formosa MS Effciency Fast Rectifiers EF1605CT THRU EF1660CT High reliability test capabilities Item Test Conditions Reference O 1. Solder Resistance at 260 ± 5 C for 10 ± 2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 OC for 5 sec. MIL-STD-202F METHOD-208 3. High Temperature Reverse Bias V R=80% rate at T J=150 OC for 168 hrs. MIL-STD-750D METHOD-1038 4. Forward Operation Life Rated average rectifier current at T A=25 OC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. MIL-STD-750D METHOD-1036 5. Intermittent Operation Life 6. Pressure Cooker JESD22-A102 15P SIG at T A=121 OC for 4 hrs. MIL-STD-750D METHOD-1051 7. Temperature Cycling -55 OC to +125 OC dwelled for 30 min. and transferred for 5min. total 10 cycles. 8. Forward Surge 8.3ms single half sine-wave , one surge. MIL-STD-750D METHOD-4066-2 9. Humidity at T A=85 OC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 10. High Temperature Storage Life at 175 OC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date Revision Page. DS-222520 2009/02/10 2013/12/10 C 6