ZL30342 SyncE/SONET/SDH G.8262/Stratum3 & IEEE 1588 Packet G.8261 Synchronizer Short-Form Data Sheet June 2012 Features Ordering Information • Supports the requirements of ITU-T G.8262 for synchronous Ethernet Equipment slave Clocks (EEC option 1 and 2) • Supports the requirements of Telcordia GR-1244 Stratum 3 and GR-253, ITU-T G.812 and G.813 • Supports ITU-T G.823, G.824 and G.8261 for 2048 kbit/s and 1544 kbit/s interfaces • Frequency, Phase and Time Synchronization over IP, MPLS and Ethernet Packet Networks • Trays Trays -40oC to +85oC Frequency accuracy performance for WCDMAFDD, GSM, LTE-FDD and femtocell applications, with target performance less than ± 15 ppb. • Synchronizes to telecom reference clocks (2 kHz, N*8 kHz up to 77.76 MHz, 155.52 MHz) or to Ethernet reference clocks (25 MHz, 50 MHz, 62.5 MHz, 125 MHz) • Programmable output synthesizer generates telecom clock frequencies from any multiple of 8 kHz up to 100 MHz • Generates standard SONET/SDH clock rates (e.g., 19.44 MHz, 38.88 MHz, 77.76 MHz, 155.52 MHz, 622.08 MHz) or Ethernet clock rates (e.g., 25 MHz, 50 MHz, 125 MHz, 156.25 MHz, 312.5 MHz) for synchronizing Gigabit Ethernet PHYs • Frequency performance for ITU-T G.823 and G.824 synchronization interface, as well as G.8261 PNT EEC, PNT PEC and CES interface specifications. • Phase Synchronization performance for WCDMA-TDD, Mobile WiMAX, TD-SCDMA and CDMA2000 applications with target performance less than ± 1 s phase alignment. • DPLL that is configurable through a serial interface • Client reference switching between multiple Servers Time Synchronization for UTC-traceability and GPS replacement. • Client holdover when Server packet connectivity is lost • • ZL30342GGG 64 Pin CABGA ZL30342GGG2 64 Pin CABGA* *Pb Free Tin/Silver/Copper Meets the SONET/SDH jitter generation requirements up to OC-48/STM-16 osci ref0 ref1 ref2 Software PLL Control osco /N1 SONET / Ethernet APLL /N2 ref (over I2C/SPI) DPLL sync0 sync1 sync2 Software PLL Control sync diff apll_clk Programmable Synthesizer N*8kHz (over I2C/SPI) mode lock hold I2 C/SPI Figure 1 - Functional Block Diagram 1 Microsemi Corporation Copyright 2012, Microsemi Corporation. All Rights Reserved. JTAG p_clk p_fp ZL30342 1.0 Features 1.1 Time Synchronization Algorithm Short-Form Data Sheet • External algorithm controls software digital PLL to adjust frequency & phase alignment • Frequency, Phase and Time Synchronization over IP, MPLS and Ethernet Packet Networks • Frequency accuracy performance for WCDMA-FDD, GSM, LTE-FDD and femtocell applications, with target performance less than ± 15 ppb. • Frequency performance for ITU-T G.823 and G.824 synchronization interface, as well as G.8261 PNT EEC, PNT PEC and CES interface specifications. • Phase Synchronization performance for WCDMA-TDD, Mobile WiMAX, TD-SCDMA and CDMA2000 applications with target performance less than ± 1 s phase alignment. • Time Synchronization for UTC-traceability and GPS replacement. • Client reference switching between multiple Servers • Client holdover when Server packet connectivity is lost 1.2 Electrical Clock Engine • Supports the requirements of ITU-T G.8262 for synchronous Ethernet Equipment slave Clocks (EEC option 1 and 2) • Supports the requirements of Telcordia GR-1244 Stratum 3 and GR-253, ITU-T G.813 and ITU-T G.812 • Supports ITU-T G.823, G.824 and G.8261 for 2048 kbit/s and 1544 kbit/s interfaces • Meets the SONET/SDH jitter generation requirements up to OC-48/STM-16 • Synchronizes to telecom reference clocks (2 kHz, N*8 kHz up to 77.76 MHz, 155.52 MHz) or to Ethernet reference clocks (25 MHz, 50 MHz, 62.5 MHz, 125 MHz) • Supports composite clock inputs (64 kHz, 64 kHz + 8 kHz, 64 kHz + 8 kHz + 400 Hz) • Provides DPLL that is configurable through a serial interface • Internal state machine automatically controls mode of operation (free-run, locked, holdover) • Flexible input reference monitoring automatically disqualifies references based on frequency and phase irregularities • Supports master/slave configuration and dynamic input to output delay compensation for AdvancedTCATM • Provides automatic reference switching and holdover during loss of reference input 1.3 Electrical Clock Generation • Generates standard SONET/SDH clock rates (e.g., 19.44 MHz, 38.88 MHz, 77.76 MHz, 155.52 MHz, 622.08 MHz) or Ethernet clock rates (e.g., 25 MHz, 50 MHz, 125 MHz, 156.25 MHz, 312.5 MHz) for synchronizing Gigabit Ethernet PHYs • Programmable output synthesizers (P0, P1) generate telecom clock frequencies from any multiple of 8 kHz up to 100 MHz • Generates several styles of telecom frame pulses with selectable pulse width, polarity and frequency • Configurable input to output delay and output to output phase alignment 2 Microsemi Corporation ZL30342 1.4 Short-Form Data Sheet API Software • Interfaces to 1588-capable PHY and switches with integrated timestamping • Abstration layer for independence from OS and CPU, from embedded SoC to home-grown • Fits into centralized, highly integrated pizza box architectures as well as distributed architectures with multiple line cards and timing cards 2.0 Applications • ITU-T G.8262 System Timing Cards which support 1 GbE and 10 GbE interfaces • Telcordia GR-253 Carrier Grade SONET/SDH Stratum 3 System Timing Cards • System Timing Cards which supports ITU-T G.781 SETS (SDH Equipment Timing Source) • Integrated basestation reference clock for air interface for GSM, WCDMA, LTE and WiMAX macro, micro or femtocells • Mobile Backhaul NID, edge router or access aggregation node • EPON/GE-PON & GPON OLT • EPON/GE-PON & GPON ONU/OLT • DSLAM and RT-DSLAM 3 Microsemi Corporation ZL30342 Short-Form Data Sheet Microsemi Corporation (NASDAQ: MSCC) offers a comprehensive portfolio of semiconductor solutions for: aerospace, defense and security; enterprise and communications; and industrial and alternative energy markets. Products include high-performance, high-reliability analog and RF devices, mixed signal and RF integrated circuits, customizable SoCs, FPGAs, and complete subsystems. Microsemi is headquartered in Aliso Viejo, Calif. Learn more at www.microsemi.com. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo CA 92656 USA Within the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 © 2012 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners.