120 DATA SHEET ARRAY CHIP RESISTORS YC162 (4Pin/2R) 1%, 5% sizes 2 × 0603 Product specification – December 03, 2013 V.1 Supersedes Date of Mar. 06, 2003 RoHS compliant Product specification Chip Resistor Surface Mount YC SERIES 2 7 162 (RoHS Compliant) SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes YC162 series chip resistor arrays with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED ) APPLICATIONS Terminal for SDRAM and DDRAM YC162 – X X X XX XXXX L (1) (2) (3) (5) (6) (1) TOLERANCE F=± 1% Computer applications: laptop computer, desktop computer Consume electronic equipment: PDAs, PNDs (4) J = ± 5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel Mobile phone, telecom… (3) TEMPERATURE COEFFICIENT OF RESISTANCE FEATURES RoHS compliant Reducing environmentally hazardous wastes High component and equipment reliability – = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Saving of PCB space Non-forbidden materials used in products/production Detailed resistance rules show in table of “Resistance rule of global part number”. (6) OPTIONAL CODE Halogen Free Epoxy Letter L is the system default code for ordering only. Moisture sensitivity level: MSL 1 Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω ORDERING EXAMPLE The ordering code of a YC162 convex chip resistor array, value 1,000Ωwith ± 5% tolerance, supplied in 7-inch tape reel is: YC162-JR-071K(L). NOTE 1. All our R-Chip products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER www.yageo.com Dec. 03, 2013 V.1 Product specification Chip Resistor Surface Mount YC SERIES 3 7 162 (RoHS Compliant) MARKING YC162 1-Digit marking Fig. 1 Jumper = 0 Ω E-24 series: 3 digits, ±5% First two digits for significant figure and 3rd digit for number of zeros Fig. 2 Value = 240 KΩ E24/E-96 series: 4 digits, ±1% First three digits for significant figure and 4th digit for number of zeros Fig. 3 Value = 316Ω For further marking information, please see special data sheet “Chip resistors marking” CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.4 OUTLINES Fig. 4 Chip resistor outlines DIMENSIONS SCHEMATIC Table 1 TYPE For dimension see Table 1 YC162 B (mm) 0.30 ± 0.10 H (mm) 0.50 ± 0.10 P (mm) 0.80 ± 0.05 L (mm) 1.60 ± 0.10 T (mm) 0.40 ± 0.10 W1 (mm) 0.30 ± 0.10 W2 (mm) 1.60 ± 0.10 R1 = R2 Fig. 5 Chip resistor dimension Fig. 6 Equivalent circuit diagram www.yageo.com Dec. 03, 2013 V.1 Product specification Chip Resistor Surface Mount YC SERIES 162 (RoHS Compliant) ELECTRICAL CHARACTERISTICS 4 7 FOOTPRINT AND SOLDERING PROFILES Table 2 YC162 1/16 W CHARACTERISTICS Operating Temperature Range –55 °C to +155 °C Maximum Working Voltage 50 V Maximum Overload Voltage 100 V Dielectric Withstanding Voltage 100 V Number of Resistors For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. 2 5% (E24) 10 Ω to 1 MΩ Resistance Range 1% (E-24/E-96) 10 Ω to 1 MΩ < 0.05 Ω Zero Ohm Jumper Temperature Coefficient ± 200 ppm/°C Jumper Criteria Rated Current 1.0 A Maximum Current 2.0 A PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION YC162 Paper Taping Reel (R) 7" (178 mm) QUANTITY PER REEL 5,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION POWER RATING YC 162 rated power at 70 °C is 1/16 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR) or max. working voltage whichever is less Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 7 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (T amb ) P=Rated power (W) R=Resistance value (Ω) www.yageo.com Dec. 03, 2013 V.1 Product specification Chip Resistor Surface Mount YC SERIES 5 7 162 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 70± 5 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 REQUIREMENTS ± (2%+0.05 Ω) <100 mΩ for Jumper JIS C 5202-7.10 IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered JIS C 5202-7.11 No direct impingement of forced air to the parts ± (1%+0.05 Ω) <50 mΩ for Jumper Tolerances: 155± 3 °C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ± (2%+0.05 Ω) <100 mΩ for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 24± 2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+125 °C Note: Number of cycles required is 300. Devices unmounted Short time overload MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 ± (0.5%+0.05 Ω) for 10 KΩ to 10 MΩ ± (1%+0.05 Ω) for others Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air <50 mΩ for Jumper 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature ± (2%+0.05 Ω) <50 mΩ for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required ± (1%+0.05 Ω) 3 mm bending No visible damage <50 mΩ for Jumper Bending time: 60± 5 seconds Ohmic value checked during bending www.yageo.com Dec. 03, 2013 V.1 Product specification Chip Resistor Surface Mount YC SERIES 6 7 162 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required IEC 60068-2-58 Magnification 50X Well tinned (≥95% covered) No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245± 3 °C Dipping time: 3± 0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 °C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples ± (1%+0.05 Ω) IEC 60068-2-58 Leadfree solder, 270 °C, 10 seconds immersion time <50 mΩ for Jumper No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Dec. 03, 2013 V.1 Product specification Chip Resistor Surface Mount YC SERIES 7 7 162 (RoHS Compliant) REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 1 Dec. 03, 2013 - - 1% tolerance added - Operating temperature range updated Version 0 Nov 10, 2008 - - New datasheet for 2 × 0603 thick film 5% with lead-free terminations - Description of "Halogen Free Epoxy" added - Define global part number “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Dec. 03, 2013 V.1