Datasheet

DATA SHEET
GENERAL PURPOSE CHIP RESISTORS
RC0603
5%, 1%, 0.5%, 0.1%
Product specification – June 25, 2014 V.5 Supersedes Date of Mar. 06, 2003
RoHS compliant
Product specification
Chip Resistor Surface Mount
RC
0603 (RoHS Compliant)
SERIES
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC0603 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
2
9
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED )
APPLICATIONS
 All general purpose application
RC0603
(1) (2) (3) (4)
-

Reducing environmentally
hazardous wastes

High component and equipment
reliability

Saving of PCB space

None forbidden-materials used
in products/production

Halogen Free Epoxy
(6)
D = ± 0.5%
B = ± 0.1%
D = ± 0.5%
Products with lead free
terminations meet RoHS
requirements
Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
(5)
(1) TOLERANCE
FEATURES
 RoHS compliant
-
X R - XX XXXX L
F = ± 1%
J = ± 5% (for Jumper ordering, use code of J)
(2) PACKAGING TYPE
R = Paper / PE taping reel
(3) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(4) TAPING REEL
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
(5) RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(6) DEFAULTCODE
Letter L is the system default code for ordering only. (Note)
Resistance rule of global part
number
Resistance code rule
Example
0R
0R = Jumper
XRXX
(1 to 9.76 Ω)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
ORDERING EXAMPLE
The ordering code of a RC0603
chip resistor, value 56 X with
± 1% tolerance, supplied in 7-inch
tape reel is: RC0603FR-0756RL.
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
3
9
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER (PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC
CODE
2322 / 2350
XXX XXXXX L
(1)
(2)
(3)
Last digit of 12NC
Resistance decade (3)
(4)
TYPE/ START TOL. RESISTANCE
0603 IN (1)
(%) RANGE
PAPER / PE TAPE ON REEL (units) (2)
5,000
10,000/not preferred
20,000
RC21
2322
± 5% 1 to 10 MΩ
702 60xxx
702 70xxx
702 81xxx
RC22
2322
± 1% 1 to 10 MΩ
704 6xxxx
704 7xxxx
704 8xxxx
HRC21 2350
± 5% 11 to 22 MΩ
522 10xxx
-
-
Jumper 2322
-
702 96001
702 97001
702 92002
0Ω
Last digit
0.01 to 0.0976 X
0.1 to 0.976 X
0
1 to 9.76 X
8
10 to 97.6 X
9
100 to 976 X
1
1 to 9.76 KX
2
7
10 to 97.6 KX
3
(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.
100 to 976 KX
4
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
1 to 9.76 MX
5
10 to 97.6 MX
6
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
Example:
(4) "L" is optional symbol (Note) .
ORDERING EXAMPLE
The ordering code of a RC22 resistor, value 56 X with ± 1% tolerance,
supplied in tape of 5,000 units per reel is: 232270465609(L) or
RC0603FR-0756R(L).
0.02 X
0.3 X
=
0200 or 200
=
3007 or 307
1X
=
1008 or 108
33 KX
10 MX
=
3303 or 333
=
1006 or 106
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added
(both are on customer request)
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
4
9
MARKING
RC0603
E-24 series: 3 digits
First two digits for significant figure and 3rd digit
for number of zeros
Fig. 1 Value = 10 KΩ
E-96 series: 3 digits for 0603 ± 1% EIA-96 marking
method
Fig. 2 Value = 12.4 KΩ
Fig. 3 E-24 1% Value = 56 KΩ
For 0603 ± 1% E-24 series, one short bar under
marking letter
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Nibarrier) are added. See fig.4
OUTLINES
For dimension see Table 1
DIMENSIONS
Table 1
TYPE
RC0603
L (mm)
1.60 ± 0.10
W (mm)
0.80 ± 0.10
H (mm)
0.45 ± 0.10
I1 (mm)
0.25 ± 0.15
I2 (mm)
0.25 ± 0.15
Fig. 4 Chip resistor outlines
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
ELECTRICAL CHARACTERISTICS
5
9
FOOTPRINT AND SOLDERING
PROFILES
Table 2
RC0603 1/10 W
CHARACTERISTICS
Operating Temperature Range
–55 °C to +155 °C
Maximum Working Voltage
75 V
Maximum Overload Voltage
150 V
Dielectric Withstanding Voltage
100 V
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
5% (E24) 1 Ω to 22 MΩ
1% (E24/E96) 1 Ω to 10 MΩ
Resistance Range
0.i%, 0.5% (E24/E96) 10 Ω to 1 MΩ
Zero Ohm Jumper < 0.05 Ω
Temperature Coefficient
1 Ω ≤ R ≤ 10Ω
± 200 ppm/°C
10 MΩ < R ≤ 22 MΩ
± 200 ppm/°C
10 Ω < R ≤ 10 MΩ
± 100 ppm/°C
Rated Current
1.0 A
Maximum Current
2.0 A
Jumper Criteria
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
RC0603
Paper Taping Reel (R)
7" (178 mm)
5,000 units
13" (330 mm)
20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
POWER RATING
RC0603 rated power at 70°C is 1/10 W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
or max. working voltage whichever is less
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
Fig. 5 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T amb )
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
6
9
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Temperature
Coefficient of
Resistance
(T.C.R.)
IEC 60115-1 4.8
At +25/–55 °C and +25/+125 °C
Refer to table 2
Formula:
R2–R1
T.C.R= ------------------------- × 106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Life/Endurance
IEC 60115-1 4.25.1
1,000 hours at 70± 5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω) for 0.1%,
0.5%, 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
IEC 60068-2-2
Moisture
Resistance
MIL-STD-202G Method-106G
1,000 hours at 155± 5 °C, unpowered
±(1.0%+0.05 Ω) for 0.1%,
0.5%, 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω) for 0.1%,
Parts mounted on test-boards, without
condensation on parts
<100 mΩ for Jumper
0.5%, 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
Measurement at 24± 2 hours after test conclusion
Thermal Shock
MIL-STD-202G Method-107G
-55/+125 °C
±(0.5%+0.05 Ω) for 0.1%,
Number of cycles required is 300. Devices
unmounted
0.5%, 1% tol.
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 0.1%,
±(1%+0.05 Ω) for 5% tol.
Maximum transfer time is 20 seconds. Dwell time
<50 mΩ for Jumper
is 15 minutes. Air – Air
Short Time
Overload
IEC60115-1 4.13
0.5%, 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
7
9
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Board Flex/
Bending
IEC 60068-2-21
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω) for 0.1%, 0.5%,
3 mm bending
<50 mΩ for Jumper
Bending time: 60± 5 seconds
No visible damage
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55± 3 °C
±(0.5%+0.05 Ω) for 0.1%, 0.5%,
This constitutes shall be repeated for 96 hours
±(1.0%+0.05 Ω) for 5% tol.
Low
Temperature
Operation
IEC 60068-2-1
However the applied voltage shall not exceed
the maximum operating voltage
Insulation
Resistance
IEC 60115-1 4.6
Rated continuous overload voltage (RCOV)
for 1 minute
Type
Voltage (DC)
Dielectric
Withstand
Voltage
IEC 60115-1 4.7
Resistance to
Solvent
IPC/JEDEC J-STD-020D
Noise
Humidity
IEC 60115-1 4.12
IEC 60115-1 4.21
1% , 5%
1% tol.
No visible damage
≥10 GΩ
RC0603
100 V
Maximum voltage (Vrms) applied for 1 minute
Type
RC0603
Voltage (AC)
100 Vrms
No breakdown or flashover
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Maximum voltage (Vrms) applied
Resistors range
Value
R < 100 Ω
10 dB
100 Ω ≤ R < 1 KΩ
20 dB
1 KΩ ≤ R < 10 KΩ
30 dB
10 KΩ ≤ R < 100 KΩ
40 dB
100 KΩ ≤ R < 1 MΩ
46 dB
1 MΩ ≤ R ≤ 22 MΩ
48 dB
Steady state for 1000 hours at 40 °C / 95%
±(1.0%+0.05 Ω) for 0.1%, 0.5%,
R.H. RCWV applied for 1.5 hours on and
1% tol.
0.5 hour off
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
8
9
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Intermittent
Overload
IEC 60115-1 4.39
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
± (1.0%+0.05 Ω) for 0.1%,
0.5%, 1% tol.
± (2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Well tinned (≥95% covered)
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245± 3 °C
Dipping time: 3± 0.5 seconds
- Leaching
IPC/JEDEC J-STD-002B test D
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
- Resistance to
Soldering Heat
IEC 60068-2-58
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω) for 0.1%,
Leadfree solder, 260 °C, 10 seconds
immersion time
0.5%, 1% tol.
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
±(1.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
www.yageo.com
Jun. 25, 2014 V.5
Product specification
Chip Resistor Surface Mount
RC
SERIES
0603 (RoHS Compliant)
9
9
REVISION HISTORY
REVISION DATE
Version 5
CHANGE NOTIFICATION DESCRIPTION
Jun. 25, 2014
- Add 0.5% tolerance for RC0603
- update test method
Version 4
Apr. 24, 2009 -
- Test Items and methods updated
- Test requirements upgraded
Version 3
Jul. 15, 2008
-
- Change to dual brand datasheet that describe RC0603 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2
Aug. 19, 2004 -
Version 1
Aug. 02, 2004 -
- New datasheet for 0603 thick film 1% and 5% with lead-free terminations
- Replace the 0603 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC21_5_4
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Jun. 25, 2014 V.5