Yageo corporation ELECTROLYTIC CAPACITORS Screw Type Aluminum Electrolytic Capacitors NF [ Long Life for Inverter ] Specially For Higher Voltage with Compact Size ELECTRICAL CHARACTERISTICS Operating Temperature Range -40 to +85°C Rated Voltage Range 400V, 450V Rated Capacitance Range 1800 ~ 22000μF Capacitance Tolerance ±20% (120Hz, +20°C) Leakage Current I = 0.01CV or 5mA Whichever is smaller. (After 5 Minutes Application of DC Voltage at 20°C) Description Endurance : 85°C, 5000 Hours Higher voltage with compact size, to be used in inverters. Dissipation Factor Rate Voltage (V) 400 450 at 120Hz, +20°C tan δ 0.15 0.15 Endurance After the rated voltage has been applied at 85°C for 5000 hours, and then has resumed its original condition for 16 hours. MULTIPLIER FOR RIPPLE CURRENT Frequency Coefficient FACTOR 60 (b) Dissipation Factor: ≤ 1.75 Times Initial Specified Value 100(120) 300 1K ≥10K 0.70 0.70 1.00 1.10 1.30 1.40 (c) Leakage Current: ≤ Initial Specified Value Shelf Life After having been stored for 1000 hours at 85°C, the rated voltage has been applied for 30 minutes, and then has resumed its original condition for 16 hours. (a) Capacitance Change: ±15% Initial Measured Value (b) Dissipation Factor: ≤ 1.75 Times Initial Specified Value (c) Leakage Current: ≤ Initial Specified Value diagram of dimensions Sleeve M5x0.8 Safety Vent F ±1 FREQUENCY (Hz) 50 (a) Capacitance Change: ±15% Initial Measured Value L ±2 20max Dø±1 Unit: mm Dø F 51 22 63.5 28.6 76 32 89 32 101 41.5 165 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS CAP. (μF) D x L: mm RATED VOLTAGE W V (SURGE VOLTAGE W V) 400 (450) SIZE RIPPLE CURRENT DISSIPATION FACTOR 1800 450 (500) SIZE RIPPLE CURRENT DISSIPATION FACTOR 51 x 115 7.60 0.15 2200 51 x 115 8.80 0.15 51 x 130 8.80 0.15 2700 51 x 130 10.20 0.15 63.5 x 95 9.50 0.15 3300 63.5 x 95 11.00 0.15 63.5 x 115 11.20 0.15 3900 63.5 x 115 12.80 0.15 63.5 x 130 12.80 0.15 4700 63.5 x 130 14.80 0.15 76 x 115 14.10 0.15 5600 76 x 115 16.20 0.15 76 x 130 16.20 0.15 6800 76 x 130 18.70 0.15 76 x 155 19.10 0.15 8200 76 x 155 22.00 0.15 76 x 195 23.00 0.15 89 x 130 21.00 0.15 89 x 170 25.70 0.15 89 x 195 29.70 0.15 101 x 175 29.30 0.15 89 x 235 35.90 0.15 101 x 195 34.20 0.15 101 x 235 40.20 0.15 10000 12000 15000 76 x 195 26.70 0.15 89 x 130 24.20 0.15 89 x 155 28.50 0.15 89 x 195 34.80 0.15 18000 89 x 235 41.20 0.15 22000 101 x 235 47.00 0.15 Note: 1. Ripple Current: (A/rms) 85°C, 120Hz 2. Dissipation Factor: 120Hz / 20°C