120 DATA SHEET ARRAY CHIP RESISTORS YC102 (4Pin/2R) sizes 2 × 0201 Product specification – Sep 24, 2008 V.0 Supersedes Date of Mar. 06, 2003 RoHS compliant Product specification Chip Resistor Surface Mount YC SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes YC102 series chip resistor arrays with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER APPLICATIONS Terminal for SDRAM and DDRAM (1) (2) (3) Mobile phone, telecom… FEATURES RoHS compliant - Products with lead free terminations meet RoHS requirements - Pb-glass contained in electrodes - Resistor element and glass are exempted by RoHS Reducing environmentally hazardous wastes component and equipment reliability of PCB space None forbidden-materials used in products/production Halogen Free Epoxy (5) (6) F = ±1% J = ±5% (for Jumper ordering, use code of J) (2) PACKAGING TYPE R = Paper taping reel (3) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec (4) TAPING REEL 07 = 7 inch dia. Reel (5) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed resistance rules show in table of “Resistance rule of global part number”. (6) OPTIONAL CODE L = optional symbol (Note) High Saving (4) (1) TOLERANCE applications: laptop computer, desktop computer electronic equipment: PDAs, PNDs ( PREFERRED ) YC102 – X X X XX XXXX L Computer Consume 2 7 102 (RoHS Compliant) SERIES Resistance rule of global part number Resistance code rule Example 0R 0R = Jumper XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω ORDERING EXAMPLE The ordering code of a YC102 convex chip resistor array, value 1,000 X with ±5% tolerance, supplied in 7-inch tape reel is: YC102-JR-071K(L). NOTE 1. All our RSMD products meet RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER www.yageo.com Sep 24, 2008 V.0 Product specification Chip Resistor Surface Mount YC SERIES 3 7 102 (RoHS Compliant) MARKING YC102 No marking Fig. 1 ynsc008 For further marking information, please see special data sheet “Chip resistors marking”. CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environment influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Nibarrier) are added. See fig.2 OUTLINES overcoat resistive layer inner electrode termination ceramic substrate Fig. 2 Chip resistor outlines DIMENSIONS SCHEMATIC Table 1 TYPE YNSC069 For dimension see Table 1 YC102 B (mm) 0.20 ±0.10 H (mm) 0.35 ±0.10 P (mm) 0.50 ±0.05 L (mm) 0.80 ±0.10 T (mm) 0.35 ±0.10 W1 (mm) 0.15 ±0.10 W2 (mm) 0.60 ±0.10 H T 4 3 W1 B W2 R1 R2 CCA862_a P L 1 YNSC071 Fig. 3 Chip resistor dimension 2 R1 = R2 Fig. 4 Equivalent circuit diagram www.yageo.com Sep 24, 2008 V.0 Product specification Chip Resistor Surface Mount YC SERIES ELECTRICAL CHARACTERISTICS 4 7 102 (RoHS Compliant) FOOTPRINT AND SOLDERING PROFILES Table 2 For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. YC102 1/32 W CHARACTERISTICS Operating Temperature Range –55 °C to +125 °C Maximum Working Voltage 15 V Maximum Overload Voltage 30 V Dielectric Withstanding Voltage 30 V Number of Resistors 2 5% (E24) 10 Ω to 1 MΩ Resistance Range 1% (E24/E96) 10 Ω to 1 MΩ < 0.05 Ω Zero Ohm Jumper Temperature Coefficient ±200 ppm/°C Jumper Criteria Rated Current 0.5 A Maximum Current 1.0 A PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PRODUCT TYPE PACKING STYLE REEL DIMENSION YC102 Paper Taping Reel (R) 7" (178 mm) QUANTITY PER REEL 10,000 units NOTE 1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. FUNCTIONAL DESCRIPTION POWER RATING YC 102 rated power at 70 °C is 1/32 W RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V=√(P X R) or max. working voltage whichever is less handbook, halfpage MLB206_1 P (%Prated ) 100 50 0 55 0 50 70 100 125 o Tamb ( C) Where V=Continuous rated DC or AC (rms) working voltage (V) Fig. 5 Maximum dissipation (P) in percentage of rated power as a function of the operating ambient temperature (Tamb) P=Rated power (W) R=Resistance value (X) www.yageo.com Sep 24, 2008 V.0 Product specification Chip Resistor Surface Mount YC SERIES 5 7 102 (RoHS Compliant) TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Operational Life/ Endurance MIL-STD-202G-method 108A 1,000 hours at 70±5 °C applied RCWV 1.5 hours on, 0.5 hour off, still air required ±(2%+0.05 Ω) High Temperature Exposure/ Endurance at upper category temperature MIL-STD-202G-method 108A IEC 60115-1 4.25.3 1,000 hours at maximum operating temperature depending on specification, unpowered ±(1%+0.05 Ω) <50 mΩ for Jumper JIS C 5202-7.11 No direct impingement of forced air to the parts Moisture Resistance MIL-STD-202G-method 106F IEC 60115-1 4.24.2 IEC 60115-1 4.25.1 <100 mΩ for Jumper JIS C 5202-7.10 Tolerances: 125±3 °C Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ±(2%+0.05 Ω) <100 mΩ for Jumper Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion Thermal Shock MIL-STD-202G-method 107G -55/+125 °C Note: Number of cycles required is 300. Devices unmounted Short time overload MIL-R-55342D-para 4.7.5 IEC60115-1 4.13 ±(0.5%+0.05 Ω) for 10 KΩ to 10 MΩ ±(1%+0.05 Ω) for others Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air <50 mΩ for Jumper 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature ±(2%+0.05 Ω) <50 mΩ for Jumper No visible damage Board Flex/ Bending IEC60115-1 4.33 Device mounted on PCB test board as described, only 1 board bending required ±(1%+0.05 Ω) 3 mm bending No visible damage <50 mΩ for Jumper Bending time: 60±5 seconds Ohmic value checked during bending www.yageo.com Sep 24, 2008 V.0 Product specification Chip Resistor Surface Mount YC SERIES 6 7 102 (RoHS Compliant) TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required IEC 60068-2-58 Magnification 50X Well tinned (≥95% covered) No visible damage SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching - Resistance to Soldering Heat IPC/JEDECJ-STD-002B test D No visible damage IEC 60068-2-58 Leadfree solder, 260 °C, 30 seconds immersion time MIL-STD-202G-method 210F Condition B, no pre-heat of samples ±(1%+0.05 Ω) IEC 60068-2-58 Leadfree solder, 270 °C, 10 seconds immersion time <50 mΩ for Jumper No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Sep 24, 2008 V.0 Product specification Chip Resistor Surface Mount YC SERIES 7 7 102 (RoHS Compliant) REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 0 Sep 24, 2008 - - New datasheet for 2 × 0201 thick film 1% and 5% with lead-free terminations - Description of "Halogen Free Epoxy" added - Define global part number “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Sep 24, 2008 V.0