Yageo corporation ELECTROLYTIC CAPACITORS SQ [ For Adapter and Power Supply Applications Series ] Miniature Aluminum Electrolytic Capacitors 105°C 2000 Hours, Wide Temperature Range and Low Impedance Electrical Characteristics Operating Temperature Range : -40 ~ +105°C Rated Voltage Range : 160V ~ 450DC Rated Capacitance Range : 2.2 ~ 220μF Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C DC Leakage Current (μA) : I ≤ 0.03CV + 10μA (After Rated Voltage Applied for 3 Minutes) I = Leakage Current (μA), C = Nominal Capacitance (μF), V = Rated Voltage (V) description Dissipation Factor W V (V): 160 D.F. (%) : 15 Recommended Applications: AV (TV, Video, Audio), Monitor / Computer, OA / HA / Communication, Converter / Inverter, Energy Saving Lamp, PFC Circuit, SMPS, Ballast, Adapter 200 15 250 15 W V (V) : Impedance: Z - 25°C / Z + 20°C Z - 40°C / Z + 20°C 350 24 400 24 160 3 6 450 24 200 3 6 250 3 6 350 3 6 400 3 6 450 3 6 Endurance : After the rated voltage has been applied at 105°C for 2000 hours. The capacitors shall meet the following reuirements. (a) Capacitance Change : Within 20% of Initial Value (b) Dissipation Factor : Not Exceeding 200% of the Specified Value (c) Leakage Current : Not Exceeding the Specified Value MULTIPLIER FOR RIPPLE CURRENT Frequency Coefficient FREQUENCY (Hz) 50 120 1K 10K 100K < 33μF 0.80 1.00 1.36 1.54 1.80 ≥ 34μF 0.85 1.00 1.28 1.35 1.40 Shelf Life: After leaving capacitors under no load at 105°C for 1000 hours, the capacitors shall meet the same requirements as Endurance. diagram of dimensions Dimensions: mm Rubber Stand-off dø 10.0 5.0 0.6 7.5 0.8 Vinyl Sleeve (P.V.C) Rubber End Seal Vinyl Sleeve (P.V.C) Rubber End Seal F±0.5 F F±0.5 Dø 13.0 L 16.0 18.0 L ≤ 16 L + 1.5Max. L > 16 L + 2Max. Dø = 8 & 10 L + 2.5Max. 15Min. 5Min. D±0.5 Dø < 20 Dø + 0.5 Dø ≥ 20 Dø + 1 L 15Min. 5Min. D±0.5 70 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS CAP. (μF) D x L: mm RATED VOLTAGE W V (SURGE VOLTAGE W V) 160 (200) SIZE RIPPLE 120Hz 200 (250) SIZE 100KHz RRIPPLE 120Hz 250 (300) SIZE RIPPLE 120Hz 100KHz 10 x 19.5 120 220 100KHz 10 22 10 x 19.5 195 350 10 x 19.5 195 350 13 x 25 165 300 33 13 x 20 315 450 13 x 20 365 520 13 x 25 280 400 47 13 x 25 420 600 13 x 25 420 600 16 x 25 505 720 68 13 x 25 420 600 16 x 25 665 950 16 x 32 570 810 100 16 x 25 665 950 16 x 32 840 1200 18 x 36 735 1050 220 18 x 36 980 1400 Note: 1. Ripple Current: (mA/rms) 105°C, 120Hz & 100KHz 71 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS CAP. (μF) D x L: mm RATED VOLTAGE W V (SURGE VOLTAGE W V) 350 (400) SIZE 400 (450) SIZE RIPPLE 120Hz 100KHz 450 (500) SIZE RIPPLE 120Hz 100KHz RIPPLE 120Hz 100KHz 2.2 10 x 15 30 50 10 x 15 80 140 10 x 15 60 110 3.3 10 x 15 35 60 10 x 19.5 110 195 10 x 19.5 75 135 4.7 10 x 19.5 45 78 10 x 25 120 220 13 x 20 105 190 10 13 x 20 75 130 13 x 25 200 360 13 x 25 140 250 22 16 x 25 115 205 16 x 25 315 570 16 x 32 265 480 33 16 x 32 180 255 16 x 32 490 700 18 x 36 455 650 47 18 x 32 225 320 18 x 32 600 860 18 x 36 520 720 18 x 40 720 1000 82 100 18 x 45 370 530 120 Note: 1. Ripple Current: (mA/rms) 105°C, 120Hz & 100KHz