REVISIONS NOTES: 1) OPERATING TEMPERATURE: -65 F to +300 F 2) FINISH: Parts shall have a smooth appearance, with no gates and all flash removed 3) DELTA SEAL P/N E309-90-014 4) U.S. & Foreign Pat. Issued & Pend. .158 (4.013mm) ECN # REV DESCRIPTION N/A INITIAL RELEASE REVISED PER ECR 111009AZ01 001 A DATE INITIALS 7/12/01 JS 2/12/10 KH .24 (6.10mm) .039 (.991mm) A SECTION A-A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH DECIMALS .X .020 .XX .010 .XXX .005 BREAK ALL CORNERS AND SHARP EDGES .030 MAX MATERIAL ETHYLENE PROPYLENE DIENE RUBBER (EPDM) 70 DUROMETER (BLACK) FINISH TITLE: SEE NOTES ISOMETRIC VIEW THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 5 4 3 VISUAL COMMUNICATIONS COMPANY 190 Bosstick Boulevard, Suite 101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] APPROVALS DRAWN K.Howard CHECKED DPZ LENS SPACER SPC 040 DATE 2/12/10 2/22/10 DO NOT SCALE DRAWING 2 SIZE DWG. NO. REV A SPC 040_E SCALE: 8:1 001 SHEET 1 OF 1 1