8 5 6 7 4 2 3 NOTES: ECN # 1. DESIGN: Lens mounts the Litepipe securely to display panel providing 180 viewing angle 2. MOUNTING: Panel mounting hole .171 (4.3mm)on 1/4" centers 3. PANEL THICKNESS: For SMB 200 & SMQ 250: 1/32" to 1/8" D 1 REVISIONS REV DESCRIPTION N/A INITIAL RELEASE 001 REVISED PER ECR111009AZ01 DATE 4/4/96 4/23/10 INITIALS JS KH 4. LENS LOCK: Insert Litepipe into lens aligning the tabs with the lens slot 5. Standoff used to adjust the height of a standard LED above the PCB and maintain a maximum .050" clearance between the Litepipe and LED. 6. Length is from front of panel to LED 7. Custom lengths available upon request (Minimum order quantity may apply) 8. U.S. & Foreign Pat. Issued & Pend. .155 (3.937mm) D .020 (.508mm) LENS LOCKING TAB 4 .155 (3.937mm) A C LENSES (ORDER SEPERATELY) A C SMB 200 SMQ 250 .125 (3.175mm) B B ORDERING CODE: LSV XXX CTP XXX LENGTH CODE A 020 =.200" 040 .400 060 .600 080 .800 100 1.000 120 COLOR CTP SECTION A-A CLEAR UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH 1.200 BREAK ALL CORNERS AND SHARP EDGES .030 MAX MATERIAL VISUAL COMMUNICATIONS COMPANY, INC. ACRYLIC (OPTICAL GRADE) U.L. 94-HB FINISH 3MM ROUND LITEPIPE DATE APPROVAL THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 7 6 5 4 3 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] TITLE: SEE NOTES CUSTOM LENGTHS AVAILABLE UPON REQUEST (SEE NOTE 7) 8 DECIMALS .X .020 .010 .XX .XXX .005 DRAWN K.Howard 4/23/10 CHECKED DPZ 5/4/10 SIZE SCALE: 8:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B LSV XXX CTP 001 SHEET 1 OF 1 1 A