ROHM SMLE12BC7T

0603 <1.6 0.8 t=0.36mm>
Low Current Type(IF 10mA)
SMLE12 Series
Blue
Emitting Color
Green
Material
InGaN on SiC
Package Size(mm)
1608(0603) 1.6×0.8(t=0.36)
SMLE12BC7T
Part No.
SMLE12EC6T
note) "-" will be taken out for emitting color B/E series.
Absolute Maximum Ratings (Ta=25°C)
66
20
100
5
-30 to +85
-40 to +100
(0.13)
68
0.36 +0.04
−0.1
Blue
Green
SMLE12EC6T
0.8
(mW)
SMLE12BC7T
1.6
1.2
Peak
Forward
Reverse Operating
Storage
forward
current
voltage temperature temperature
current
IF
VR
Topr
Tstg
IFP
(mA)
(V)
( C)
( C)
(mA)
Power
Emitting dissipation
color
PD
Part No.
Dimensions (Unit:mm)
:Duty 1/10, 1kHz.
Terminal
Part No.
Resin Color
Forward
voltage
VF
Typ.
(V)
SMLE12BC7T Transparent
SMLE12EC6T Colorless
IF
(mA)
Max.
(µA)
VR
(V)
5
100
5
2.9
3.0
Light wavelength
Reverse
current
IR
Brightness
IV
Peak Half-wave
∆λ
λp
Typ.
(nm)
Typ.
(nm)
468
26
521
35
0.65
Electrical Optical Characteristics (Ta=25°C)
0.8
IF
(mA)
5
Min. Typ.
IF
( mcd) (mcd) (mA)
9.0
22
36
85
Tolerance:±0.1
5
Directivity (Typ.)
Angular Displacement (deg)
X
0°
Y
30°
30°
60°
60°
90°
100
50
0
50
90°
100
RELATIVE LUMINOUS INTENSITY (%)
Angular Displacement (deg)
0°
X’
Y’
30°
30°
60°
60°
90°
100
50
0
50
90°
100
RELATIVE LUMINOUS INTENSITY (%)
Recommended Pad Layout
Packaging Specifications (Unit:mm)
Tape Specifications : T86 <5,000pcs/reel>
Reel Specifications
0.8
(Unit:mm)
The recommended thickness of the screen mask
for soldering is between 100 and 150µm. The
hole size of the screen mask should be same as
the recommended land pattern or smaller.
0.95
Tolerance:± 0.2
φ 180 −30
φ 60 +10
8
φ 13
1.75±0.1
5.5
1.85
φ 1.5 +0.1
0
0 to 0.5
2±0.05
3.5±0.05
0.8 0.85 0.8
Feeding direction
4±0.1
0.5
Label Position
Tolerance:± 0.2
11.4±1
Electrical Characteristic Curves
Relative Luminous Intensity - Case Temperature
Forward Current - Forward Voltage
SMLE12BC7T
Ta=25°C
SMLE12EC6T
10.0
1.0
0.8
0.6
0.4
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
3.2
CASE TEMPERATURE : Tc (°C)
FORWARD VOLTAGE : VF (V)
SMLE12BC7T
Ta=25°C
SMLE12EC6T
1.0
0.1
0
5
10
15
20
MAXIMUM FORWARD CURRENT : IF Max. (mA)
Derating
SMLE12BC7T
SMLE12EC6T
20
10
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100
AMBIENT TEMPERATURE : Ta (°C)
SMLE12EC6T
5
1
1
10
100
1000
PULSE DURATION : Tw (µs)
FORWARD CURRENT : IF (mA)
30
SMLE12BC7T
10
10kHz
RELATIVE LUMINOUS INTENSITY
10.0
Ratio of Maximum Tolerable Peak Current - Pulse Duration
RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max.
IF Max.
to MAXIMUM TOLERABLE DC CURRENT
Relative Luminous Intensity - Forward Current
100Hz
3.1
1.2
200Hz
3.0
SMLE12EC6T
1.4
1kHz
2.9
IF=5mA
2kHz
1.0
2.8
SMLE12BC7T
1.6
RELATIVE LUMINOUS INTENSITY
FORWARD CURRENT : IF (mA)
100.0
10000
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0