DD11 Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C14 with Line Switch 2-pole, Fuseholder 1- or 2-pole Standard or Medical Fuse drawer Order required accessories separately C14 70° C Description -Panel Mount: Screw-on version from front or rear side -3 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole -V-Lock notch standard -Quick connect terminals 4.8 x 0.8 mm Approvals -VDE Certificate Number: 40018283 -UL File Number: E93617 Characteristics -Ultra-compact design. Ideal for low profile designs -All single elements are already wired -Fuse drawer meets requirements of medical standard IEC/EN 60601-1 -Ideal for application with high transient loads -Suitable for use in equipment according to IEC/UL 60950 Other versions on request -Solder terminals -Fuse drawer 1-pole, plus spare fuse case -Fuse drawer 2-pole, with shorting bar -Other rocker marking -Line switch 1-pole -Protection class II, 70°C References Alternative: version with line filter DD12 Alternative: version for snap-in mounting KM Alternative: version for PCB mounting DD21 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Wire Harnessing, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 1) 10 A / 250 VAC; 50 Hz 8 A / 250 VAC; 60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 85 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw-on mounting: max 8 mm Mounting screw torque max 0.5 Nm Rear side mounting: max 2 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch C14 acc. to IEC 60320 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details with cover 7 A, without cover 8 A Connectors 1 DD11 Power entry modules without line filter www.schurter.com/PG05 Dimensions Screw version 46.7 10.3 PE N L 6 90° 30.5 27.7 27.1 5 3.2 2 56 30 65 33.1 2.5 10.6 29.8 6 5 a) 46.6 56 ±0.15 47.1±0.10 2 3. 1 ±0 R 22.9 2a 28.1 ±0.10 4 .0 5 31.5 b) a) view with cover b) view without cover Diagrams non illuminated 1) L illuminated L' S F1 PE 2) PE' F2 N 1) L F1 PE N' N 1) Line 2) Load L' S R F2 2) PE' N' 1) Line 2) Load Derating Curves 2-pole Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 Ambient air temperature Ta °C 2 100 Admissible power acceptance in Watt per pole 1-pole 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 Ambient air temperature Ta °C Connectors 40 60 80 4 31.6 100 DD11 Power entry modules without line filter www.schurter.com/PG05 All Variants 1) Color Cover 1) Fuseholder Line Switch Illumination Order Number 1-pole 2-pole non-illuminated - DD11.0111.1110 █ 1-pole 2-pole illuminated red DD11.0113.1110 █ 1-pole 2-pole illuminated green DD11.0114.1110 █ 2-pole 2-pole non-illuminated - DD11.0121.1110 █ 2-pole 2-pole illuminated red DD11.0123.1110 █ 2-pole 2-pole illuminated green DD11.0124.1110 █ 1-pole 2-pole non-illuminated - l DD11.0111.1111 █ 1-pole 2-pole illuminated red l DD11.0113.1111 █ 1-pole 2-pole illuminated green l DD11.0114.1111 █ 2-pole 2-pole non-illuminated - l DD11.0121.1111 █ 2-pole 2-pole illuminated red l DD11.0123.1111 █ 2-pole 2-pole illuminated green l DD11.0124.1111 █ current rating UL: with cover 7 A, without cover 8 A █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 50 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Wire Harness Wire harness for SCHURTER products Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Connectors 3 DD11 Power entry modules without line filter www.schurter.com/PG05 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DD11 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DD11 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC17KS, North America, 2.0 m, Connector C17, cord end: 6051.2801 VAC17KS, Europlug, 2.0 m, Connector IEC C17, cord end: 6051.2803 VAC17KS, Europlug, 2.0 m, Connector IEC C17, cord end: 6051.2813 VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to DD11 24.08.2015 4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.