CMF2, CMF5 Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C8 polarized with Line Switch 1-pole CMF2 C8 polarized 70° C Description -Panel Mount: Screw-on mounting on PCB, from top or bottom -2 Functions: Appliance Inlet Protection class II, Line Switch 1‑pole -For PCB mounting Characteristics -Easy mounting with center bolt and snapper or srewed on PCB or housing -Electrical connection done on the PCB -Bi-positioning of the switch from left or right side, Standard CMF with switch on right side -With or without rear-side insulation cover -Suitable for use in equipment according to IEC/UL 60950 Other versions on request -Line switch with other rocker marking -Line switch on left of inlet References Alternative: unpolarized version or protection class I Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing 2.5 A / 250 VAC; 50 Hz 6 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class II acc. to IEC 61140 PCB 1.6 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C8p following IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class II Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical Details Connectors 1 CMF2, CMF5 Power entry modules without line filter www.schurter.com/PG05 Dimensions 24.3 53.3 2.3 26.65 22.3 2.3 26.65 0.9 2 3 19 R 1 1.6 2.8 N 4 4 3 9 18 R L 0 0.8 1.05 3 -0.1 10.2 8.25 2.8 8.6 18.45 0.8 7 8.15 6.16 8 4.15 10 45 ±0.1 27.55 11 3 25.75 2.4 1.3 With insulation cover The size of the mounting cut-out can be selected as required. Drilling Diagram / CMF1 and CMF2 Fixation on PCB or housing from below Fixation on PCB or housing from above 10.2 8.25 7 +0.1 1.6 0 1) M3x12 1) M3x12 11±0.13 21.6 4.2±0.05 13 3.2 23.4 1) self tapping screw 45±0.1 28.05 13.4 1.6 D1 0 5.9- 0.1 9 9 ±0.1 10 3 3 5.3 6.16 8.6 11 +0.30 11 +0.15 14.3 +0.1 1.6 0 1) self tapping screw 29.85 D1 = 6.2 mm mounting from above / D1 = 3.6 mm mounting from below PC Board 1.6 mm / Dimensions without tolerance: ≤ 15 = ± 0.05 / > 15 = ± 0.10 Drilling diagram CMF4 and CMF5 mirror-inverted All Variants Connectors Mounting side Cover Ground terminal Ground terminal direction Order Number C8p from below with cover - CMF2.1131.12 C8p from below without cover - CMF2.1031.12 C8p from top with cover - CMF2.1111.12 C8p from top without cover - CMF2.1011.12 Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 2 50 Pcs Connectors CMF2, CMF5 Power entry modules without line filter www.schurter.com/PG05 Mating Outlets/Connectors Category / Description Power Supply or Interconnection Cord Overview complete Kabelverbindung/2.5, North America, diverse m, Connector IEC cord end: CS02.0221.150 Power Supply or Interconnection Cord further types to CMF2, CMF5 24.08.2015 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 3