231600P Fuseholders www.schurter.com/PG02 Shock-Safe Fuseholder, 4.7 x 16 mm, Fingergrip, Rear-Side 250 VAC · 1 W / 5 A Description References -Screw type fuse carrier Fuseholder to D0 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated current Rated Power Acceptance IEC Degree of Protection Protection Class Soldering Methods Contact Resistance Resistance to Vibration 4.7 x 16 mm Panel Mount, Rear Side Fixing Nut Solder 250 VAC 5 A 1 W / 5 A @ Ta 23 °C IP 67 Suitable for appliances with protection class I or II acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoset, black Unit Weight 8.2 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking Type Dimension Shocks Bumps Salt Mist Dump Heat Climatic Composite Admissible Torque on Fixing Nut Panel Thickness s Iron < mΩ at 20 mV acc. to NF C 20-706 / IEC 60068-2-6, test Fc acc. to NF C 20-706 / IEC 60068-2-27 acc. to NF C 20-729 / IEC 60068-2-29 acc. to NF C 20-711 / IEC 60068-2-11 acc. to NF C 20-604 acc. to NF C 20-619 Phase D max 0.7 Nm max 2 mm 33.5 mm max. 2 min. 1 +0.2 0 11.1 3.5x1.7 12.6 ø2 max. ø 15 Ecrou 13/plats 2 max. 12.5 +0.1 0 Tenon max. 33.5 Mounting holes All Variants l Cap Degree of Protection Order Number Fingergrip IP 67 7090.6020 Availability for all products can be searched real-time:http://www. schurter.com/en/Stock-Check/Stock-Check-SCHURTER Fuses 1 231600P Bulk (10 pcs.) 03.03.2015 Packaging Unit Fuseholders www.schurter.com/PG02 2 Fuses The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.