KBPC35005 THRU KBPC3510 SILICON BRIDGE RECTIFIERS Reverse Voltage - 50 to 1000 Volts KBPC-35 FEATURES The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260 C/10 seconds,at 5 lbs. (2.3kg) tension .452 MAX. (11.5) 0.480(12.2) 0.425(10.8) 1.181(30.0) 1.102(28.0) HOLE FOR NO.8 SCREW 0.673(17.1) 0.633(16.1) AC + 0.732(18.6) 0.692(17.6) MECHANICAL DATA 1.181(30.0) 1.102(28.0) Case:Metal case Terminals: Plated 0.25” (6.35mm)lug. Polarity: Polarity symbols marked on case Mounting:Thru hole for #8 screw,20in.-lbs. torque max. Weight:1.02 ounce, 29 grams 0.673(17.1) 0.633(16.1) - AC 0.582(14.8) 0.543(13.8) Forward Current - 35.0 Amperes 0.033x0.250 (0.8x6.4) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for current capacitive load current derate by 20%. MDD Catalog Number Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TC=50 C (Note 1,2) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum instantaneous forward voltage dorp per bridge element at 17.5A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Isolation voltage from case to leads Typical Thermal Resistance (Note 2) Operating junction temperature range storage temperature range SYMBOLS VRRM VRMS VDC KBPC 35005 50 35 50 KBPC 3501 100 70 100 KBPC 3502 KBPC 3504 200 140 200 KBPC 3506 400 280 400 600 420 600 KBPC 3508 800 560 800 KBPC 3510 UNITS 1000 VOLTS 700 VOLTS 1000 VOLTS I(AV) 35 Amps IFSM 400.0 Amps I2t 664 A2s VF 1.1 Volts IR 10 1.0 2500 2.0 -65 to +150 -65 to +150 µA mA VISO RθJA TJ TSTG NOTES: 1.Unit mounted on 9” x 3.5” x4.6” thick(23cmx9cmx11.8cmcm)Al.plate. 2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #8 screw. MDD ELECTRONIC VAC C/W C C FIG. 1- FORWARD CURRENT DERATING CURVE 35 28 21 Single Phase Half Wave 60Hz Resistive or inductive Load 14 7 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES KBPC35005 THRU KBPC3510 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 400 320 240 160 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 80 175 0 1 10 AMBIENT TEMPERATURE, C 100 10 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 0.1 0.6 0.8 1.0 1.2 1.4 1.5 FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 200 1 1,000 100 TJ=100 C 10 1 0.01 0 20 40 60 80 TJ=25 C 100 TRANSIENT THERMAL IMPEDANCE, C/W 2000 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE 10 1 0.1 0.01 0.01 0.1 1 10 10 0.1 1.0 10 100 PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=25 C 0.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 100 NUMBER OF CYCLES AT 60 Hz 100 REVERSE VOLTAGE,VOLTS MDD ELECTRONIC t,PULSE DURATION,sec. 100