GP02-20 THRU GP02-40 2000V-4000V 0.25A HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER FEATURES ¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ High temperature metallurgically bonded construction ¨ Glass passivated cavity-free junctions ¨ Capable of meeting environmental standards of MIL-S-19500 ¨ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP02 -20 GP02 -25 GP02 -30 GP02 -35 GP02 -40 UNITS Maximum repetitive peak reverse voltage VRRM 2000 2500 3000 3500 4000 Volts Maximum RMS Voltage VRMS 1400 1750 2100 2450 2800 Volts Maximum DC blocking voltage VDC 2000 2500 3000 3500 4000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 0.25 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load at: (JEDEC Method) TA=55°C IFSM 15.0 Amps VF 3.0 Volts IR 5.0 50.0 mA Typical reverse recovery time (NOTE 1) trr 2.0 ms Typical junction capacitance (NOTE 2) CJ 3.0 pF RQJA 130.0 °C/W TJ, TSTG -65 to +175 °C Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage TA= 25°C TA=100°C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com GP02-20 THRU GP02-40 2000V-4000V 0.25A HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER RATINGS AND CHARACTERISTIC CURVES GP02-20 THRU GP02-40 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.25 15 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.2 0.15 0.1 0.05 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING 10 5.0 175 0 10 1 AMBIENT TEMPERATURE, °C 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 10 TJ=100°C 1 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 6.0 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 5.0 4.0 3.0 2.0 1.0 0 0.1 1 10 100 REVERSE VOLTAGE, VOLTS E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com