1.5KE6.8 THRU 1.5KE440A 6.8-440V TRANSZORB® Transient Voltage Suppressors 1500W ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000µs waveform repetition rate (duty cycle): 0.05% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types ♦ For devices with V(BR) >10V, ID are typically less than 1.0µA ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension ♦ Includes 1N6267 thru 1N6303 MECHANICAL DATA Case: Molded plastic body over passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) except for bi-directional Mounting Position: Any Weight: 0.045 ounce, 1.2 grams For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440A (e.g. 1.5KE6.8C, 1.5KE440CA). Electrical characteristics apply in both directions. Ratings at 25°C ambient temperature unless otherwise specified. Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, Fig. 1) Peak pulse current with a 10/1000µs waveform (NOTE 1) Steady state power dissipation at TL=75°C lead lengths, 0.375" (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) unidirectional only (NOTE 3) SYMBOL VALUE UNITS PPPM Minimum 1500 Watts IPPM SEE TABLE 1 Amps PM(AV) 6.5 Watts IFSM 200 Amps VF 3.5/5.0 Volts TJ, TSTG -55 to +175 °C Maximum instantaneous forward voltage at 100A for unidirectional only (NOTE 4) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2 (2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5 (3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum (4) VF=3.5V for devices of V(BR)≤220V and VF=5.0 Volt max. for devices of V(BR)>220V 1 of 5 TRANSZORB® Transient Voltage Suppressors 6.8-440V 1500W ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Amps Maximum Clamping Voltage at IPPM Vc (Volts) 1N6267 +1.5KE6.8 6.12 7.48 10 5.50 1000 139 10.8 0.057 1N6267A +1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057 1N6268 +1.5KE7.5 6.75 8.25 10 6.05 500 128 11.7 0.061 1N6268A +1.5KE7.5A 7.13 7.88 10 6.40 500 133 11.3 0.061 1N6269 +1.5KE8.2 7.38 9.02 10 6.63 200 120 12.5 0.065 1N6269A +1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065 1N6270 +1.5KE9.1 8.19 10.0 1.0 7.37 50 109 13.8 0.068 1N6270A +1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1N6271 +1.5KE10 9.00 11.0 1.0 8.10 10 100 15.0 0.073 1N6271A +1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1N6272 +1.5KE11 9.90 12.1 1.0 8.92 5.0 92.6 16.2 0.075 1N6272A +1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075 1N6273 +1.5KE12 10.8 13.2 1.0 9.72 5.0 86.7 17.3 0.076 1N6273A +1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078 1N6274 +1.5KE13 11.7 14.3 1.0 10.5 5.0 78.9 19.0 0.081 1N6274A +1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081 1N6275 +1.5KE15 13.5 16.5 1.0 12.1 5.0 68.2 22.0 0.084 1N6275A +1.5KE15A 14.3 15.8 1.0 12.8 5.0 70.8 21.2 0.084 1N6276 +1.5KE16 14.4 17.6 1.0 12.9 5.0 63.8 23.5 0.086 1N6276A +1.5KE16A 15.2 16.8 1.0 13.6 5.0 66.7 22.5 0.086 1N6277 +1.5KE18 16.2 19.8 1.0 14.5 5.0 56.6 26.5 0.088 1N6277A +1.5KE18A 17.1 18.9 1.0 15.3 5.0 59.5 25.2 0.089 1N6278 +1.5KE20 18.0 22.0 1.0 16.2 5.0 51.5 29.1 0.090 1N6278A +1.5KE20A 19.0 21.0 1.0 17.1 5.0 54.2 27.7 0.090 1N6279 +1.5KE22 19.8 24.2 1.0 17.8 5.0 47.0 31.9 0.092 1N6279A +1.5KE22A 20.9 23.1 1.0 18.8 5.0 49.0 30.6 0.092 1N6280 +1.5KE24 21.6 26.4 1.0 19.4 5.0 43.2 34.7 0.094 1N6280A +1.5KE24A 22.8 25.2 1.0 20.5 5.0 45.2 33.2 0.094 1N6281 +1.5KE27 24.3 29.7 1.0 21.8 5.0 38.4 39.1 0.096 1N6281A +1.5KE27A 25.7 28.4 1.0 23.1 5.0 40.0 37.5 0.096 1N6282 +1.5KE30 27.0 33.0 1.0 24.3 5.0 34.5 43.5 0.097 1N6282A +1.5KE30A 28.5 31.5 1.0 25.6 5.0 36.2 41.4 0.097 1N6283 +1.5KE33 29.7 36.3 1.0 26.8 5.0 31.4 47.7 0.098 1N6283A +1.5KE33A 31.4 34.7 1.0 28.2 5.0 32.8 45.7 0.098 1N6284 +1.5KE36 32.4 39.6 1.0 29.1 5.0 28.8 52.0 0.099 1N6284A +1.5KE36A 34.2 37.8 1.0 30.8 5.0 30.1 49.9 0.099 1N6285 +1.5KE39 35.1 42.9 1.0 31.6 5.0 26.6 56.4 0.100 1N6285A +1.5KE39A 37.1 41.0 1.0 33.3 5.0 27.8 53.9 0.100 1N6286 +1.5KE43 38.7 47.3 1.0 34.8 5.0 24.2 61.9 0.101 1N6286A +1.5KE43A 40.9 45.2 1.0 36.8 5.0 25.3 59.3 0.101 1N6287 +1.5KE47 42.3 51.7 1.0 38.1 5.0 22.1 67.8 0.101 1N6287A +1.5KE47A 44.7 49.4 1.0 40.2 5.0 23.1 64.8 0.101 1N6288 1.5KE51 45.9 56.1 1.0 41.3 5.0 20.4 73.5 0.102 1N6288A 1.5KE51A 48.5 53.6 1.0 43.6 5.0 21.4 70.1 0.102 1N6289 1.5KE56 50.4 61.8 1.0 45.4 5.0 18.6 80.5 0.103 1N6289A 1.5KE56A 53.2 58.8 1.0 47.8 5.0 19.5 77.0 0.103 1N6290 1.5KE62 55.8 68.2 1.0 50.2 5.0 16.9 89.0 0.104 1N6290A 1.5KE62A 58.9 65.1 1.0 53.0 5.0 17.6 85.0 0.104 1N6291 1.5KE68 61.2 74.8 1.0 55.1 5.0 15.3 98.0 0.104 JEDEC TYPE NUMBER General Semiconductor PART NUMBER Breakdown Voltage V(BR) (Volts) (NOTE 1) Min Max E-mail: [email protected] Test Current at IT (mA) Stand-off Voltage VWM (Volts) 2 of 5 Maximum Reverse Leakage at VWM ID (NOTE 4) (µA) Maximum Peak Pulse Current IPPM (NOTE 2) Maximum Temperature Coefficient of V(BR) (% / °C) Web Site: www.taychipst.com 1.5KE6.8 THRU 1.5KE440A TRANSZORB® Transient Voltage Suppressors 6.8-440V 1500W ELECTRICAL CHARACTERISTICS at (TA=25 C unless otherwise noted) TABLE 1 (Cont’d) Amps Maximum Clamping Voltage at IPPM Vc (Volts) 1N6291A 1.5KE68A 64.6 71.4 1.0 58.1 5.0 16.3 92.0 0.104 1N6292 1.5KE75 67.5 82.5 1.0 60.7 5.0 13.9 109 0.105 1N6292A 1.5KE75A 71.3 78.8 1.0 64.1 5.0 14.6 104 0.105 1N6293 1.5KE82 73.8 90.2 1.0 66.4 5.0 12.7 118 0.105 1N6293A 1.5KE82A 77.9 86.1 1.0 70.1 5.0 13.3 113 0.105 1N6294 1.5KE91 81.9 100.0 1.0 73.7 5.0 11.5 131 0.106 1N6294A 1.5KE91A 86.5 95.5 1.0 77.8 5.0 12.0 125 0.106 1N6295 1.5KE100 90.0 110 1.0 81.0 5.0 10.4 144 0.106 1N6295A 1.5KE100A 95.0 105 1.0 85.5 5.0 10.9 137 0.106 1N6296 1.5KE110 99.0 121 1.0 89.2 5.0 9.5 158 0.107 1N6296A 1.5KE 110A 105 116 1.0 94.0 5.0 9.9 152 0.107 1N6297 1.5KE120 108 132 1.0 97.2 5.0 8.7 173 0.107 1N6297A 1.5KE120A 114 126 1.0 102 5.0 9.1 165 0.107 1N6298 1.5KE130 117 143 1.0 105 5.0 8.0 187 0.107 1N6298A 1.5KE130A 124 137 1.0 111 5.0 8.4 179 0.107 1N6299 1.5KE150 136 165 1.0 121 5.0 7.0 215 0.108 1N6299A 1.5KE150A 143 158 1.0 128 5.0 7.2 207 0.106 1N6300 1.5KE160 144 176 1.0 130 5.0 6.5 230 0.106 1N6300A 1.5KE160A 152 168 1.0 136 5.0 6.8 219 0.108 1N6301 1.5KE170 153 187 1.0 138 5.0 6.1 244 0.108 1N6301A 1.5KE170A 162 179 1.0 145 5.0 6.4 234 0.108 1N6302 1.5KE180 162 198 1.0 146 5.0 5.8 258 0.108 1N6302A 1.5KE180A 171 189 1.0 154 5.0 6.1 246 0.108 1N6303 1.5KE200 180 220 1.0 162 5.0 5.2 287 0.108 1N6303A 1.5KE200A* 190 210 1.0 171 5.0 5.5 274 0.108 1.5KE220 198 242 1.0 175 5.0 4.4 344 0.108 JEDEC TYPE NUMBER General Semiconductor PART NUMBER Breakdown Voltage V(BR) (Volts) (NOTE 1) Min Max Test Current at (mA) IT Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (NOTE 4) (µA) Maximum Peak Pulse Current IPPM (NOTE 2) Maximum Temperature Coefficient of V(BR) (% / °C) 1.5KE220A* 209 231 1.0 185 5.0 4.6 328 0.108 1.5KE250 225 275 1.0 202 5.0 4.2 360 0.110 1.5KE250A 237 263 1.0 214 5.0 4.4 344 0.110 1.5KE300 270 330 1.0 243 5.0 3.5 430 0.110 1.5KE300A 285 315 1.0 256 5.0 3.6 414 0.110 1.5KE350 315 385 1.0 284 5.0 3.0 504 0.110 1.5KE350A 333 368 1.0 300 5.0 3.1 482 0.110 1.5KE400 360 440 1.0 324 5.0 2.6 574 0.110 1.5KE400A 380 420 1.0 342 5.0 2.7 548 0.110 1.5KE440 396 484 1.0 356 5.0 2.4 631 0.110 1.5KE440A 418 462 1.0 376 5.0 2.5 602 0.110 NOTES: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bidirectional types with VR 10 volts and less the ID limit is doubled * Bidirectional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA, 1.5KE220CA) + UL listed for Telecom applications protection, 497B, file number E136766 for both uni-directional and bi-directional devices E-mail: [email protected] 3 of 5 Web Site: www.taychipst.com 1.5KE6.8 THRU 1.5KE440A TRANSZORB® Transient Voltage Suppressors 6.8-440V 1500W RATINGS AND CHARACTERISTIC CURVES 1.5KE6.8 THRU 1.5KE440CA FIG. 2 - PULSE DERATING CURVE FIG. 1 - PEAK PULSE POWER RATING CURVE 100 PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % PPPM, PEAK PULSE POWER, kW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25°C 10 1.0 0.1 0.1 s 1.0ms 100 s 10 s 1.0 s 10ms td, PULSE WIDTH, sec. 75 50 25 0 25 0 50 75 125 100 150 175 200 TA, AMBIENT TEMPERATURE, °C FIG. 3 - PULSE WAVEFORM FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP tr=10µsec. PEAK VALUE IPPM CJ, CAPACITANCE , pF IPPM, PEAK PULSE CURRENT, % 150 100 HALF VALUE - IPP 2 50 10/1000µsec. WAVEFORM as DEFINED by R.E.A. UNIDIRECTIONAL BIDIRECTIONAL 1,000 VR=0 f=1 MHz Vsig=50mVP-P TJ=25°C 100 VR=RATED STAND-OFF VOLTAGE 10 td 0 100 10 5 500 V(BR), BREAKDOWN VOLTAGE, VOLTS 4.0 3.0 2.0 1.0 0 t, TIME,ms FIG. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNI-DIRECTIONAL ONLY 8.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 7.0 6.0 L PEAK FORWARD SURGE CURRENT, AMPERES PM(AV), STEADY STATE POWER DISSIPATION, WATTS FIG. 5 - STEADY STATE POWER DERATING CURVE = 0.375” (9.5mm) LEAD LENGTHS 5.0 4.0 3.0 1.6 x 1.6 x 0.040" (40 x 40 x 1mm.) COPPER HEAT SINKS 2.0 1.0 0 0 25 50 75 100 125 150 175 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max. 100 10 200 1 10 100 NUMBER OF CYCLES AT 60 HZ TL, LEAD TEMPERATURE,°C E-mail: [email protected] 200 4 of 5 Web Site: www.taychipst.com 1.5KE6.8 THRU 1.5KE440A TRANSZORB® Transient Voltage Suppressors 6.8-440V FIG. 7 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL FIG. 8 - INCREMENTAL CLAMPING VOLTAGE CURVE UNI-DIRECTIONAL 100 100 WAVEFORM: 10 X 1000 IMPULSE ∆VC=VC-V(BR) 1.5KE200 ∆VC, INCREMENTAL CLAMPING VOLTAGE ∆VC, INCREMENTAL CLAMPING VOLTAGE WAVEFORM: 8 X 20 IMPULSE ∆VC=VC-V(BR) 1.5KE130 20 1.5KE100 10 1.5KE75 1.5KE39 2.0 1.5KE33 1.0 1.5KE6.8 1.5KE9.1 1.5KE18 1.5KE12 1.5KE130 1.5KE75 10 1.5KE39 2.0 1.5KE33 1.0 1.5KE6.8 1.5KE9.1 0.2 0.1 0.5 1 0.1 0.5 50 20 10 2.0 50 10 2.0 1 IPP, PEAK PULSE CURRENT, AMPS IPP, PEAK PULSE CURRENT, AMPS FIG. 9 - INCREMENTAL CLAMPING VOLTAGE CURVE BI-DIRECTIONAL FIG. 10 - INCREMENTAL CLAMPING VOLTAGE CURVE BI-DIRECTIONAL 100 100 ∆VC, INCREMENTAL CLAMPING VOLTAGE WAVEFORM: 8 X 20 IMPULSE ∆VC=VC-V(BR) 1.5KE200C 20 10 1.5KE75C 1.5KE39C 1.5KE30C 2.0 1.5KE15C 1.5KE11C 1.0 1.5KE7.5C 0.2 WAVEFORM: 10 X 1000 IMPULSE ∆VC=VC-V(BR) 1.5KE200C 20 1.5KE75C 10 1.5KE39C 1.5KE30C 1.5KE15C 2.0 1.5KE11C 1.0 1.5KE7.5C 0.2 0.1 0.5 1 0.1 0.5 50 20 10 2.0 20 10 2.0 1 50 IPP, PEAK PULSE CURRENT, AMPS IPP, PEAK PULSE CURRENT, AMPS FIG. 12 - BREAKDOWN VOLTAGE TEMPERATURE COEFFICIENT CURVE Θv - TEMPERATURE COEFFICIENT - mV/ C FIG. 11 - INSTANTANEOUS FORWARD VOLTAGE CHARACTERISTICS CURVE 100 FORWARD CURRENT 1.5KE200 20 0.2 ∆VC, INCREMENTAL CLAMPING VOLTAGE 1500W 10 PULSE WIDTH=300µs 1% DUTY CYCLE TJ=25°C 1 1,000 100 UNIDIRECTIONAL BIDIRECTIONAL 10 1 5 10 20 50 100 200 500 V(BR), BREAKDOWN VOLTAGE, VOLTS 0.1 UNIDIRECTIONAL (ONLY) 0 0.4 0.8 1.2 1.6 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES E-mail: [email protected] 5 of 5 Web Site: www.taychipst.com