PFC MegaPAC MI™ Family

PFC MegaPAC MI™ Family
Both AC-DC and DC-DC
Up to 2,400 W with Active PFC
Rugged COTS Switchers
Product Highlights
Features
The PFC MegaPAC MI product line
offers unprecedented flexibility and
configurability to meet a wide range
of demanding applications and
environments. Building on Vicors
highly reliable and well-proven DC-DC
converters, The PFC MegaPAC MI
combines a powerful, feature laden front
end with slide-in output assemblies
called ConverterPACs
‰ AC inputs available: 85 – 264 Vac
User configurability is at the heart
of every MegaPAC. A wide variety of the
same length ConverterPACs can be
installed, exchanged, or removed with
the turn of just one screw. This means
the MegaPAC can be reconfigured to
meet evolving power requirements.
Given its range of configurability, the
MegaPAC is appropriate for virtually
any application from prototype
through production.
MegaPAC Configuration
DC/DC Converter
ConverterPAC
‰ Up to 32 regulated outputs (8 slots)
from 1 to 95 Vdc and above
‰ Power factor corrected
‰ DC inputs available: 100 – 380 Vdc
‰ Full power to 45°C on most products
‰ User and field configurable
‰ OVP, OTL, OCP on most outputs
‰ Fan cooled
‰ Autosense
‰ Efficiency > 80%
‰ Power fail warning
‰ MIL-STD-810 for shock and vibration
‰ Sequencing and general shut down
‰ MIL-STD-704 and 1399 for overvoltage
and transients
‰ Agency approved cTÜVus, CE Marked
‰ Current sharing
‰ -40°C operation
‰ Optional conformal coating
DC-DC Converter
At the heart of every MegaPAC MI are Vicor zerocurrent switching, DC-DC converters. The modularity
of the design combined with the breadth of the
product line means virtually any output voltage
can be provided.
ConverterPAC
ConverterPACs are the slide-in output assemblies that
allow each MegaPAC MI to be easily configured to
user-specified output requirements. Using the Vicor
DC-DC converter, up to 600 W of output power can be
provided per ConverterPAC. Larger power needs are
easily handled by paralleling ConverterPACs.
MegaPAC
Each MegaPAC houses an array of user-selected
ConverterPACs to provide a customized
power supply. With the front
end's ability to operate from
both 85 – 264 Vac and
100 – 380 Vdc, a wide of
input power sources can be
accommodated. The result
is a customized power supply with off-the-shelf delivery.
MegaPAC
Product
Size
Input Voltage
Output Power
# of Outputs
Slot Configurations
PFC
MegaPAC MI
12.3" x 6.0" x 3.4"
(312,4 x 152,4 x 86,4)
85 – 264 Vac
100 – 380 Vdc
1,200 W @ 115 Vac
1,600 W @ 230 Vac
1-32 Outputs
(8 slots)
ModuPAC(M), JrPAC(J), BatPAC(B)
DualPAC(D), RAMPAC(R), FlexPAC(FSS)
PFC
MegaPAC-HP MI
12.3" x 6.0" x 3.4"
(312,4 x 152,4 x 86,4)
85 – 264 Vac
100 – 380 Vdc
1,200 W @ 115 Vac
2,400 W @ 230 Vac
1-25 Outputs
(8 slots)
ModuPAC(M), JrPAC(J), BatPAC(B),
DualPAC(D), RAMPAC(R), FinPAC(PZ),
FlexPAC(FSS)
* FinPACs and FinQPACs require two slots
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 1 of 6
03/2015
800 927.9474
PFC MegaPAC MI™ Family
Modular ConverterPACs for PFC MegaPAC MI
Name
Modules
Output Power
FlexPAC (FSS)
2 - 4 Wide range outputs
Up to 200 W max. each output adjustable 2 -25 V
50 W or 10 A max. per output
ModuPAC (M)
1 VI-200 DC-DC converter
Up to 200 Watts per
RAMPAC (R)
1 VI-J00 DC-DC converter
Up to 100 Watts, for applications requiring low ripple/noise
1 Ripple Attenuator Module (VI-RAM)
DualPAC (D)
2 VI-J00 DC-DC converters
Dual Output; Up to 100 Watts each output
JuniorPAC (J)
1 VI-J00 DC-DC converter
Up to 100 Watts
BatPAC (B)
1 VI-200 BatMod
A 200 W programmable current source that
can be configured as a battery charger
1 Maxi DC-DC converter
Up to 600 Watts Applicable for PFC MegaPAC High Power
VI-J00 / VI-200 Series ConverterPACs
ConverterPAC
Maxi Series ConverterPACs
FinPAC (PZ)
*Only for the extended length MegaPACs.
** FinPACs and FinQPACs require 2 slots.
ConverterPAC Features and
Options
‰ Output voltages from 2 – 95 Vdc
‰ Output power up to 600 W
‰ DC OK
‰ Adjustment ranges from 50% to 110%
of nominal
ModuPAC (M)
RAMPAC (R)
DualPAC (D)
JuniorPAC (J)
BatPAC (B)
FinPAC (PZ)
‰ Autosense/Remote sense
‰ Output ripple and noise:
2% or 100 mV whichever is greater
“V” Option (max.): 50 mv for Vout <=15 V;
150 mV for 15 V <Vout <=24 V;
1% or less Vout >24 V
‰ 80 – 90% Efficiency
‰ Current source outputs available
FlexPAC (FSS)
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 2 of 6
03/2015
800 927.9474
PFC MegaPAC MI™ Family
PFC MegaPAC MI and PFC MegaPAC-HP MI Specifications
(Typical at 25°C, nominal line and 75% load, unless otherwise specified)
Input Characteristics
Input
85 – 264 Vac
Line regulation
0.2% max. from 10% to full load
Inrush current
25 A pk @ 115 Vac; 25 A pk @ 230 Vac
Ride through time
>20 ms at nom. line, full load
Power fail
>3 ms warning
Conducted EMI
(47-63 Hz)
EN55022 and FCC Level A
Level B configuration dependent
Power factor
0.99 (115 Vac); 0.98 (230 Vac)
Surge immunity
(Common mode & normal mode)
EN 61000-4-5 Class 3, Performance Critera B
Transients and Overvoltage
MIL-STD 704 and 1399
Output Characteristics
Load regulation
0.2% max. from 10% to full load; 0.5% from no load to 10% load
Set point accuracy
1.0% for standard voltages, 2.0% for special or adjustable voltages
See Vicor module specifications. A preload may be necessary for modules trimmed down below 90% of norm.
output voltage.
Ripple and noise
(20 MHz BWL)
Std. outputs: 2% or 100 mV p-p max. whichever is greater, 10% min. load
VXI options: 50 mV p-p max. for outputs, ≤15 Vdc; 150 mV p-p max. 15 V<VOUT ≤24 V; 1% VOUT >24 V
2nd Generation FinPAC, performance dependent on the converter module used.
(Output of module is unfiltered.) RAMPAC: 10 mV p-p max. or 0.15%,
whichever is greater. FlexPAC 50 mV pk-pk
Overcurrent protection
105 – 130% >5 V outputs; 30 – 125% ≤5 V outputs
Overvoltage protection
ModuPACs only: 115 – 135%
Efficiency
80% typical
Output power
1,600W @ 45°C (230Vac), PFC MegaPAC MI; 1,200W @ 45°C (115Vac), PFC MegaPAC HP MI;
2400W @ 45C (230 Vac, PFC MegaPAC HP MI
Environmental
Storage temperature
-40°C to +85°C
Operating temperature*
Full power
Half power
-40°C to +45°C
-40°C to +60°C
Safety approvals
cTÜVus, CE Mark, Low Voltage Directive
Certain wide temperature models may not carry all safety certificates.
Product weights (fully configured)
9.75 lbs. (4,43 kg)
Limited warranty
2 Years
* PFC MegaPACs MI: Maximum operating range may be configuration dependent. Contact factory for your specific model.
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 3 of 6
03/2015
800 927.9474
PFC MegaPAC MI™ Family
PFC MegaPAC MI and PFC MegaPAC-HP MI Mechanical Drawings
(Note: Newer power supplies have redesigned output studs which are 1/8th inch longer. Design guides available online at vicorpower.com for more details.)
PFC MegaPAC / PFC MegaPAC- High Power
12.24 (310,82)
3.37 (85,60)
CUSTOMER MOUNTING HOLES (16X)
M4 OR #8-32 THREAD MAXIMUM
SCREW PENETRATION .150 (4.00 MM)
FROM OUTSIDE SURFACE.
0.25 (6,35)
3.275 (83,19)
0.41 (10,35)
D
1.458 (37,03)
FAN
(DIRECTION OF AIR
47 TO 500 Hz
L2
300VDC
INPUTS
115/230 VAC
0.729 (18,52)
L1
0.470 (11,94)
DO NOT
OPERATE
WITHOUT
EARTH
GROUND
LABEL NO: 94-00046 REV B
NOTE: SET SCREW MAXIMUM
TORQUE = 4.4 INCH POUNDS
1600001 057
5.100 (129,54)
MP6-78600
6.04 (153,42)
5.10 (129,5)
7 SP. @ 0.7285 (18,5)
PFC
MegaPAC
FLOW OPTIONAL)
0.47 (11,94)
0.64 (16,31)
CLAMPING SCREWS
6.75 (171,45)
2.75 (69,85)
14 AWG WIRE
L1
INPUTS
115/230 VAC
47 TO 500 Hz
300VDC
1.40 (35,56)
1/4 - 20 SERRATED FLANGED
NUT ZINC PLATED STEEL
WITH OPTIONAL BUSS BARS
L2
DO NOT
OPERATE
WITHOUT
EARTH
GROUND
2.49 (63,17)
6.75 (171,45)
NOTE: SET SCREW MAXIMUM
TORQUE = 4.4 INCH POUNDS
LABEL NO: 94-00046 REV B
2.92 (74,17)
0.21 (5,33)
11.93 (302,90)
Connection Diagrams
Connection Diagrams, Input
INPUT CONNECTIONS
J9
J9-3 L1/N
J9-2 L2
J9-1 Earth Ground
J10 Interface
J10-1
J10-2
J10-3
J10-4
J10-5
J10-6
J10-7
J10-8
J10-9
J10-10
J10-11
J10-12
E/D-1
E/D-2
E/D-3
E/D-4
E/D-5
E/D-6
E/D-7
E/D-8
Vcc +5V, 0.3A
Signal Ground
AC Power OK
General Shutdown
J10
1
2
3
4
5
6
7
8
9 10 11 12
Housing-Molex P/N: 39-01-2120
Terminal-Molex P/N: 39-00-0039
Crimp Tool-Molex P/N: 11-01-0197
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 4 of 6
03/2015
800 927.9474
2.77 (70,23)
PFC MegaPAC MI™ Family
Connection Diagrams (cont.)
Connection Diagrams, Output
DualPAC
ModuPAC, JuniorPAC, RAMPAC
MATING HDWR:
J2 (REMOTE SENSE)
+ V0UT
1
2
3
J2-PIN1
J2-B-PIN1
TERMINALS- MOLEX P/N: 16-02-0103
CRIMP TOOL MOLEX P/N: 11-01-0208
+ SENSE
- SENSE
J1 (OUTPUT CONNECTORS)
J1-B-PIN1
HOUSING- MOLEX P/N: 50-57-9403
TRIM PIN ACCESS
0UTPUT ADJUST
MATING HDWR:
4
5
1
2
1 AND 4 +V OUT
HOUSING- MOLEX P/N: 39-01-2060
2 AND 5 -V OUT
6
3
3 +R/SENSE 6 -R/SENSE
TERMINALS- MOLEX P/N: 39-00-0039
CRIMP TOOL MOLEX P/N: 11-01-0197
OUTPUT ADJUST
J1-A-PIN1
- VOUT
J3 DC OK (POWER GOOD)
4
3
2
1
J3-PIN1
J2-A-PIN1
HOUSING- MOLEX P/N: 39-01-0043
POWER GOOD
TERMINALS- MOLEX P/N: 30-00-0031
CRIMP TOOL MOLEX P/N: 57005-5000
POWER GOOD INVERTED
SIGNAL GROUND
1
2
3
OUTPUT ADJUST
BatPAC
TRIM PIN ACCESS
HOUSING- MOLEX P/N: 50-57-9403
+ SENSE
TERMINALS- MOLEX P/N: 16-02-0103
CRIMP TOOL MOLEX P/N: 11-01-0208
- SENSE
FinPAC
BATPAC
+ V0UT
CURRENT LIMIT ADJUST
VOLTAGE LIMIT ADJUST
P2 REMOTE SENSE T
RIM/SC & POWER GOOD
J2 (BATPAC REMOTE INTERFACE)
+ 0UT
4
3
2
1
CURRENT LIMIT ADJUST
VOLTAGE LIMIT ADJUST
CURRENT MONITOR
OUTPUT ADJUST
- VOUT
- VOUT
- OUT
MATING HDWR:
J2-PIN1
MATING HDWR:
J2 (REMOTE SENSE)
MATING HDWR:
Vcc IN
7
6
5
4
3
2
1
+SENSE
-SENSE
TRIM
Vcc IN
POWER GOOD
POWER GOOD INVERTED
SIGNAL GROUND
HOUSING- MOLEX P/N: 39-01-0043
TERMINALS- MOLEX P/N: 30-00-0031
CRIMP TOOL MOLEX P/N: 57005-5000
MATING HDWR:
P2-PIN1
HOUSING- MOLEX P/N: 39-01-0073
TERMINALS- MOLEX P/N: 39-00-0031
CRIMP TOOL MOLEX P/N: 57005-5000
FlexPAC
M-1 STATUS
7
8
9
10
11
12
M-2 STATUS
M-1 VOLTAGE ADJUSTMENT
M-2 VOLTAGE ADJUSTMENT
CONNECTOR J1
-V OUT M1
-V OUT M2
-V OUT M3
-V OUT M4
DO NOT USE
DO NOT USE
1
2
3
4
5
6
+V OUT M1
+V OUT M2
+V OUT M3
+V OUT M4
DO NOT USE
DO NOT USE
MATING HARDWARE:
HOUSING MOLEX P/N 39-01-2120
TERMINALS MOLEX P/N 39-00-0039
CRIMP TOOL MOLEX P/N 11-01-0197
M-3 VOLTAGE ADJUSTMENT
M-4 VOLTAGE ADJUSTMENT
M-3 STATUS
M-4 STATUS
ConverterPAC Options
ModuPAC
(M)
BatPAC
(B)
DualPAC
(D)
JuniorPAC
(J)
RAMPAC
(R)
FinPAC
(PZ)*
FlexPAC
(FSS)
OPT
OPT
OPT
OPT
NA
NA
NA
NA
NA
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
NA
OPT
OPT
OPT
NA
NA
NA
NA
STD
OPT
NA
OPT
OPT
NA
NA
STD
OPT
NA
OPT
OPT
NA
NA
STD
STD
STD
STD
NA
NA
STD
NA
STD
NA
NA
STD
STD
NA
NA
Option
D Power Good
T Trim: +10%/–10%
F Trim: +10%/–50%
V1 VXI Low Noise
(150 mV p-p 15 V<Vout ≤24 V)
V2 VXI Low Noise
(50 mV p-p ≤15 V)
V3 VXI Low Noise
(1% Vout >24)
Parallelable
Autosense
*FinPACs require two slots
Configure your own Westcor power supply now at vicorpower.com/vspoc
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 5 of 6
03/2015
800 927.9474
PFC MegaPAC MI™ Family
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make
changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked
and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements,
testing of all parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Vicor’s Standard Terms and Conditions
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request.
Product Warranty
In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the
“Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment
and is not transferable.
UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DISCLAIMS ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW)
WITH RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MATTER.
This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be
liable for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and
assumes no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor products and components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing
and operating safeguards.
Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact
Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be
returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the
product was defective within the terms of this warranty.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support
devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform
when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to
the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor
products and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is
granted by this document. Interested parties should contact Vicor's Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: [email protected]
Technical Support: [email protected]
PFC MegaPAC MI™ Family
Rev 1.1
vicorpower.com
Page 6 of 6
03/2015
800 927.9474