Ground-based Missile Test Equipment INPUT 28 Vdc OUTPUT • 5 Vdc @ 13.0 Amps (#1) • 5 Vdc @ 13.0 Amps (#2) • 1.5 Vdc @ 0.5 Amps • 15 Vdc @ 0.8 Amps • -15 Vdc @ 0.8 Amps • -10/-17 Vdc @ 1.5 Amps (switchable output) • 17 Vdc @ 1.5 Amps • 9 Vdc @ 4.8 Amps • 28 Vdc @ 0.8 Amps TOTAL POWER 250 Watts WEIGHT 6.0 lbs. DIMENSIONS 11.25" x 9.75" x 2.0" OPERATING TEMP. 0°C to +70°C COOLING Forced air (200 LFM required) Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com This high-density power supply provides a total of 9 outputs from a nominal 28 Vdc input. Total power is 250 Watts. Three of the 9 outputs are user-programmable for dynamic shifting of the output voltage to accommodate system requirements. cstmF_AD001 Ground Mobile Test System INPUT (AC) • 102 – 250 Vac, Single-phase, 48 – 400 Hz • 102 – 250 Vac, Three-phase (L-L), 48 – 400 Hz INPUT (DC) 18 – 32 Vdc (MIL-STD-704F) OUTPUT • Ten independent programmable outputs: 0 – 40 Vdc; 0 – 5 Adc • Two VXI chassis outputs: +/- 24 V; +/-12 V; 5 V; 2 V; -5.2 V TOTAL POWER 2 kW WEIGHT 85 lbs. DIMENSIONS 17.5" x 9.0" x 25" (not including shock mounts) OPERATING TEMP. -10°C to +55°C COOLING Internal fans COMPLIANCE • MIL-STD-461 (EMI) • MIL-PRF-2880F (functional shock and loose cargo) requires external transit case Two independent VXI mainframe power supplies, up to 1 kW each. Offers flexible AC or DC input power OTHER • Virtual Instrument Software – LABVIEW™ Drivers, ATEasy™ Drivers – Stand alone software control panel • SCPI Compatible – IEEE 488.2 (GPIB) interface – RS232 / RS422 / RS485 (optional) – USB and TCPIP (802.3) – Standard VXI11 type LAN interface Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com options. cstmF_AD002 Missile Guidance & Control INPUT 28 Vdc OUTPUT Two factory-configurable DC outputs TOTAL POWER Up to 200 Watts WEIGHT <2.5 lbs. DIMENSIONS 4.4" x 4.7" x 3.2" OPERATING TEMP. -55°C to +85°C COOLING Conduction COMPLIANCE • MIL-STD-461 (EMI) • MIL-STD-810 (shock & vibration) OTHER • Current limiting Operating from 28 Vdc battery • Programmable start up sequence output, this highly ruggedized • Undervoltage lockout power supply offers two isolated • 20 Gs acceleration DC outputs. Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_AD003 Reverse Battery Protection Module INPUT 28 Vdc OUTPUT CURRENT 60 Amps (max.) (0.3 Vdc internal voltage drop max.) WEIGHT 3 lbs. DIMENSIONS 4.0" x 6.0" x 1.97" OPERATING TEMP. -55°C to +85°C COOLING Conduction COMPLIANCE • MIL-STD-704 (aircraft) • MIL-STD-1275 (ground vehicle) • MIL-STD-461 (EMI) OTHER • Reversed battery protection to 100 Vdc • Battle override switch The 544 is designed to provide high • Built-in wiring confidence test current forward and zero current under reversed polarity input conditions. It protects the load from wiring errors, whether or not the unit being powered has inherent protection, or inadequate protection from wiring faults. Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_AD004 Missile Guidance and Control INPUT 18 – 36 Vdc OUTPUT • 18 Vdc @ 5.5 Amps • -18 Vdc @ 2.6 Amps • -9 Vdc @ 2.4 Amps TOTAL POWER 168 Watts WEIGHT < 3.5 lbs. DIMENSIONS 3.3" x 4.8" x 4.4" OPERATING TEMP. -55°C to +85°C Ambient COOLING Conduction COMPLIANCE HALT qualified OTHER • Current limiting This 168 Watt solution provides three outputs in a ruggedized supply • Sequence input to power analog circuitry from a 28 Vdc battery input. Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_AD005 Ruggedized 19" Rack Mount Supply INPUT • 115 Vac, Single-phase (MIL-STD-1399) • 10 ms Hold-up time OUTPUT • 28 Vdc, 415 Watt isolated output • 5.5 Vdc, 415 Watt isolated output TOTAL POWER 830 Watt WEIGHT 18 lbs. DIMENSIONS 16.5" x 3.5" x 16.5" OPERATING TEMP. 0°C to +50°C COOLING Internal fan COMPLIANCE MIL-STD-461E (EMI): CE102, CS101, CS114, CS116, RE101, RE102, RS101, RS103 This 830 Watt ruggedized 19" rack mount power supply offers two OTHER • Power Good LEDs for both input and output voltages • Remote / Local activate via IEEE 802.3 100 base FX isolated outputs with total power of 830 Watts. • Elapsed time meter Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_AD006 SEM-E 5/7/8 Output DC-DC 50-250 W INPUT 28 Vdc (MIL-STD-704E/F) OUTPUT • 5 Outputs, 130 W (200 W surge) (5.0 V, 8.0 V, ±15 V, 24 V) • 7 Outputs, 100 W (250 W surge) (1.5 V, -2.0 V, 3.3 V, 5.0 V, -5.2 V, ±15 V) • 8 Outputs, 95 W (200 W surge) (1.5 V, 3.3 V, 5.0 V, ±8.0 V, ±15 V, 24 V) WEIGHT < 1.75 lbs. DIMENSIONS 6.75" x 6.375" x 0.58" OPERATING TEMP. -40°C to +85°C COOLING 100% Conduction cooled via rail wedgelocks COMPLIANCE • MIL-STD-461 (EMI): CE101, CE102, CS101, CS114, CS115, CS116 Space Saving 0.58" SEM-E design • Altitudes to 70,000 feet per 4.6.2.2 MIL-HDBK-5400 • Functional Shock per 4.6.2.6.1 MIL-HDBK-5400 (20g Peak, 11ms duration) OTHER • Optional 105°C vacuum / Low outgassing per MIL-HDBK-454 offers 5/7/8 outputs. These rugged SEM-E DC-DC supplies offer exceptional power density, efficiency and versatility. • Custom configurations available Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_AD007 Airborne Communications INPUT 115 Vac, Three-phase OUTPUT Six Banks with four outputs per bank: 5.25 V; 12.3 V; 12.8 / 15.3 V Switchable; 12.8 / 15.3 V Switchable TOTAL POWER 3,250 Watts WEIGHT 85 lbs. DIMENSIONS 17" x 12.5" x 22" OPERATING TEMP. -20°C to + 60°C COOLING Internal fans COMPLIANCE • MIL-STD-704 (aircraft) • MIL-STD-461 (EMI) Fully redundant 24 channel Airborne OTHER • Status monitor power system with microcontroller • Front panel LED status display • RS-232 monitor output status and control. Organized as six • Individual bank control banks of fully redundant converters • Fully redundant running from a common redundant rectifier system. Individual ON / OFF control of each bank. RS-232 and front panel status monitors. Switch selectable output voltage between Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com two operating points for 12 of the 24 total outputs. cstmF_AD008 Badger — PFC Multi-Output AC-DC Power Supply INPUT • 85 – 264 Vac, 47 – 500 Hz • Power Factor Correction: 0.99 @ 115 Vac; 0.95 @ 230 Vac OUTPUT Up to 12 isolated outputs from three channels, each channel from 1 – 4 outputs TOTAL POWER Up to 1,500 W @ 230 Vac; 800 W @ 115 Vac WEIGHT 7 lbs. DIMENSIONS 2.55" x 7.0" x 13.75" OPERATING TEMP. -55°C to 65°C COOLING Internal fans COMPLIANCE • MIL-STD-704E (input) • MIL-STD-810 (shock & vibration) OTHER • MIL-STD-461E (EMI) A rugged COTS PFC multi-output • Soft start for limiting inrush current AC-DC power supply capable of • AC power OK withstanding extreme environments • Output sequencing and shutdown and stresses found in many military • Local and remote sense and industrial applications. • Optional conformal coating Mission Power Solutions Oceanside, CA Tel: 760-631-6846 mpwrs.com cstmM_AD001 Javelin — PFC, High Power, Single Output AC-DC Power Supply INPUT 115 / 230 Vac, PFC, Single or three-phase OUTPUT Single factory-configurable DC output TOTAL POWER Up to 5,400 Watts WEIGHT 11.5 lbs. to 45.5 lbs. (model dependant) DIMENSIONS 4.9" x 7.0" x 9.5" to 7.0" x 16.0" x 13.0" (model dependant) OPERATING TEMP. -55°C to +70°C COOLING Internal fans COMPLIANCE • MIL-STD-704E (input) • MIL-STD-167-1 & MIL-STD-810 (vibration) • MIL-S-901 (shock) OTHER • EN60950 The Javelin is a family of rugged • MIL-STD-461E (EMI): CE101, 102; RE101, 102 COTS universal AC input, single DC output power supplies, fully capable • Parallel up to three units • Soft start for limiting inrush current of withstanding harsh environments • AC power OK and stresses found in many military • Optional conformal coating and industrial applications. Mission Power Solutions Oceanside, CA Tel: 760-631-6846 mpwrs.com cstmM_AD002 Ground Mobile Electronic Countermeasures INPUT 28 Vdc OUTPUT • 12, 28 and 95 Vdc (regulated) • 24 Vdc (unregulated) TOTAL POWER 1,175 Watts WEIGHT 5 lbs. DIMENSIONS 6" x 8.25" x 1.25" OPERATING TEMP. -40°C to +85°C COOLING Conduction COMPLIANCE • MIL-STD-461 (EMI) • MIL-STD-1275 (transient immunity) • MIL-STD-810 (shock & vibration) Operating from a MIL-STD-1275 input, this tracked and wheeled vehicle mounted power supply provides filtered outputs for amplifiers in addition to several regulated outputs. Mission Power Solutions Oceanside, CA Tel: 760-631-6846 mpwrs.com cstmM_AD003 Ground Mobile Electronic Countermeasures INPUT 28 Vdc OUTPUT Factory-configurable outputs from 3.3 – 48 Vdc TOTAL POWER Up to 800 Watts (80 A) WEIGHT 1.78 lbs / 1.5 lbs DIMENSIONS 6.68" x 4.55" x 0.82" / 6.69" x 3.62" x 0.76" OPERATING TEMP. -40°C to +85°C COOLING Low profile coldplate COMPLIANCE MIL-STD-810 (shock & vibration) Highly flexible COTS family of DC-DC converters with low profile, coldplate mounting and rugged construction. Granite Power Technologies Manchester, NH Tel: 603-623-3222 granitepower.com cstmG_AD001 Ground to Air Missile INPUT 28 Vdc OUTPUT • 3.3 Vdc • 5 Vdc • 12 Vdc TOTAL POWER 110 Watts WEIGHT 2.25 lbs. DIMENSIONS 7.5" x 4.0" x 1.5" OPERATING TEMP. -55°C to +100°C COOLING Conduction COMPLIANCE • MIL-STD-810 (shock & vibration) This 28 Vdc multi-output power • MIL-STD-461 (EM I) supply is housed in a rugged enclosure able to withstand severe shock and vibration environments. Granite Power Technologies Manchester, NH Tel: 603-623-3222 granitepower.com cstmG_AD002 Ground Vehicle, DC–DC Power Supply INPUT 18 – 36 Vdc OUTPUT • 5 Vdc at 20 Amps • 15 Vdc at 7 Amps • -15 Vdc at 7 Amps TOTAL POWER 310 Watts WEIGHT 1.3 lbs. DIMENSIONS 6.25" x 3.75" x 1.25" OPERATING TEMP. -40°C to 55°C COOLING Conduction COMPLIANCE MIL-STD-461E: CE102, CS101, CS114, CS115, CS116, RE102, RS101, RS103 OTHER • MIL-STD-810F, Method 514.5 for Cat. 20 – ground vehicles • Soft start for limiting inrush current and output voltage protection Triple-output power supply module intended to be used within an enclosure with passive cooling. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_AD001 Shipboard Fire Control Sensor Network INPUT 102 – 132 Vac, 47 – 63 Hz, Single-phase OUTPUT Four outputs: • 5 Vdc • 12 Vdc • -12 Vdc • 36 Vdc TOTAL POWER 345 Watts WEIGHT 11.7 lbs. DIMENSIONS 3.75" x 8.0" x 12.9" OPERATING TEMP. 0°C to +60°C COOLING Convection heat sink COMPLIANCE MIL-STD-461 (EMI) This multi-output power supply operates from 115 Vac single-phase with 345 Watts of power. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD001 Single-Phase 60/400 AC – DC Converter INPUT 115/ 220 Vac, 60 Hz, MIL-STD-704F & 1399 OUTPUT Single output: 12, 28 or 48 Vdc TOTAL POWER 600 / 650 Watts (max.) WEIGHT 3.2 lbs. DIMENSIONS 6U x 160 mm x 5 hp (1") VME OPERATING TEMP. -40°C to +85°C COOLING Coldplate COMPLIANCE • MIL-STD-704 (aircraft) • MIL-STD-1399 (shipboard) • MIL-STD-461 (EMI) • MIL-STD-810 (shock & vibration) This versatile PFC AC-DC 6U power card operates from either aircraft or shipboard AC power and provides a single DC output of up to 650 W. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD002 VME450 Power Card INPUT 28 Vdc OUTPUT Four outputs: • 3.3 Vdc • 5 Vdc • 12 Vdc • -12 Vdc TOTAL POWER 550 Watts WEIGHT 2.7 lbs. (max.) DIMENSIONS 6U x 160 mm x 4 hp (0.8”) OPERATING TEMP. -40°C to +85°C COOLING Low profile coldplate or optional finned heat sink COMPLIANCE • MIL-STD-1275 (ground vehicle) • MIL-STD-704 (aircraft) The single-slot VME450 power supply • MIL-STD-461 (EMI) is a military COTS solution that is • MIL-STD-810 (shock & vibration) compliant to the vibration requirements of MIL-STD-810F and EMI per MIL-STD- 461E. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD003 VME225 Power Card INPUT 28 Vdc OUTPUT Up to four outputs: • 3.3 •5 • 12 Vdc • -12 Vdc TOTAL POWER 225 Watts WEIGHT 1.2 lbs. DIMENSIONS 3U x 160 mm x 4 hp (0.8") OPERATING TEMP. -40°C to +85°C COOLING Low profile coldplate COMPLIANCE • MIL-STD-1275 (ground vehicle) • MIL-STD-704 (aircraft) The VME225 COTS power card is • MIL-STD-461 (EMI) a low profile, compact and rugged • MIL-STD-810 (shock & vibration) DC power supply suitable for a variety of VME applications. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD004 Ground-based Missile Defense System INPUT 105 – 135 Vac, 47 – 440 Hz, Single-phase OUTPUT • 5.0 Vdc at 25 Amps • 48 Vdc @ 1 Amp • 15 Vdc @ 2 Amps • -15 Vdc @ 2 Amps • 7.5 Vdc @ 1.5 Amps • -7.5 Vdc @ 1.5 Amps TOTAL POWER 254 Watts WEIGHT 6.6 lbs. max. DIMENSIONS 7.7" x 7.7" x 2.5" OPERATING TEMP. -45°C to 85°C COOLING Internal fans This multiple output power supply COMPLIANCE MIL-STD-461 (EMI) delivers a total of 254 Watts OTHER • LED global power good indicator from a 115 Vac input. Designed for • Battery charging circuit harsh environments, this unit is conformal coated and uses hermetically sealed semiconductors. Front end filtering provides EMI compliance to MIL-STD-461D. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD005 Ground Mobile Security System INPUT 115 / 220 Vac, 47 – 63 Hz, Single-phase OUTPUT 28 Vdc output TOTAL POWER 345 Watts WEIGHT 32 lbs. DIMENSIONS 4.9" x 15.8" x 12.2"(Deep) OPERATING TEMP. -32°C to +49°C COOLING Convection COMPLIANCE MIL-STD-461 (EMI) OTHER • Environmentally sealed box • Battery backup This military rugged air cooled converter accepts 115 Vac and provides a regulated 28 Vdc out to power external security camera systems. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_AD006 Ground Vehicle INPUT 20 – 32 Vdc OUTPUT 24 dc @ 200 Watts, 2 – 15 Vdc @ 100 Watts TOTAL POWER 400 Watts WEIGHT 6 lbs. DIMENSIONS 6.25" x 6.0" x 3.05" OPERATING TEMP. -40°C to +50°C COOLING Natural convection COMPLIANCE • MIL-STD-810F (shock & vibration, humidity, 7912 water tightness, dust and sand) • MIL-STD461E(EMI): CE102, CS114,CS115, CE101, CS101, CS116, RE102 • MIL-STD-1275B (Input transient) Sealed DC-DC power adapter for ground vehicle applications. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_AD001 Ground-based Communication Equipment INPUT 115 Vac, 50 / 60 Hz OUTPUT Six factory-configurable DC outputs TOTAL POWER 4,000 Watts WEIGHT 145 lbs. DIMENSIONS 19" x 23" x 6U OPERATING TEMP. 0°C to +32°C COOLING Internal fans COMPLIANCE UL1950 OTHER Four redundant Hot-Swap power modules with six-channel forced load sharing 2099 High-power, high-current, multi-output redundant AC-DC power supply. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_AD002 Conduction Cooled AC–DC Power Supply INPUT 60 – 160 Vac, PFC OUTPUT 28 Vdc TOTAL POWER 150 Watts WEIGHT 2.25 lbs. DIMENSIONS 7.5" x 5.375" x 2.5" OPERATING TEMP. -20°C to +80°C COOLING Conduction OTHER • Soft start for limiting inrush current and output voltage protection • Power Factor Correction Wide AC voltage and frequency input capabilities. Minimum power factor of 0.9. Autonomous overtemperature shut down with automatic recovery. Output short circuit protection. Wide operating temperatures (–20°C to +80°C) with zero CFM. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_C001 Compact PCI, DC–DC Power Supply INPUT 48 Vdc OUTPUT • 12 Vdc @ 6 Amps • 5 Vdc @ 30 Amps • 3.3 Vdc @ 70 Amps TOTAL POWER 450 Watts WEIGHT 4.6 lbs. DIMENSIONS 9.0" x 6.5" x 1.5" OPERATING TEMP. -5°C to +55°C COOLING External forced air OTHER • Compact PCI • Soft start for limiting inrush current and output voltage protection Compact PCI (cPCI) triple-output, AC-DC power supply using keyed mounting. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_C002 AC–DC Power Supply INPUT 120 Vac OUTPUT • 12 Vdc @ 1 Amp • 5 Vdc @ 12 Amps • 3.3 Vdc @ 20 Amps TOTAL POWER 140 Watts WEIGHT 5.0 lbs. DIMENSIONS 9.0" x 6.5" x 1.5" OPERATING TEMP. 0°C to +30°C COOLING External forced air OTHER • Compact PCI • Soft start for limiting inrush current and output voltage protection Compact (cPCI) power supply assembly provides 3.3, 5, and 12 Vdc power out from a 90 – 135 Vac (120 Vac nominal) source with remote shutdown signaling capability. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_C003 AC–DC Power Supply INPUT 120 / 230 Vac OUTPUT 12 Vdc @ 25 Amps TOTAL POWER 300 Watts WEIGHT 5.2 lbs. DIMENSIONS 10.75" x 6.125" x 2.0" OPERATING TEMP. -40°C to +85°C COOLING External forced air OTHER Soft start for limiting inrush current and output voltage protection Hot-Swappable, output current of 25 A for two units used in 1+1 redundant mode, 50 A for three units used in 2+1 redundant mode. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_C004 Custom 19" Rack INPUT 48 Vdc nominal (40 – 73 Vdc) OUTPUT • (1) 24 Vdc @ 800 Watts (N+1), or 1,200 Watts (non redundant) • (2) 24 Vdc @ 400 Watts (N+1), or 600 Watts (non redundant) • (3) 24 Vdc @ 216 Watts (N+1), or 324 Watts (non redundant) TOTAL POWER 1,416 Watts (N+1), or 2,124 Watts (non redundant) WEIGHT 24 lbs. (max.) DIMENSIONS 16.675" x 18" x 3.5" (fits std 2U chassis) OPERATING TEMP. 0°C to +50°C Ambient COOLING Each power unit contains two 60 mm cooling fans COMPLIANCE • UL60950 • FCC Part 15, Class A (EMI / EMC) OTHER • Input / Output connections via 10-32 studs • Outputs (1) & (2) incorporate remote voltage sense • All outputs have current limit, and OVP • Each power unit has LEDs for DC Power OK, and DC Power Fail Custom 19" Rack with three Hot-Swappable, current share configured, triple output power units for N+1 redudancy. • DC Power OK signal via normal open relay contact, (Closed=OK, Open=Fail) • Configured for current sharing Rack-to-Rack to allow paralleling of 19" Racks Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_C001 Portable Receiver INPUT 24 Vdc nominal (18 – 35 Vdc) OUTPUT • 5 Vdc @ 14.4 Amps, 72 Watts • 3.3 Vdc @ 25.5 Amps, 84 Watts • 12 Vdc @ 5.5 Amps, 66 Watts • -12 Vdc @ 3 Amps, 36 Watts TOTAL POWER 258 Watts WEIGHT 2.6 lbs. DIMENSIONS 7.4" x 2.7" x 3.8" OPERATING TEMP. -32°C to +48°C with 150 CFM Airflow COOLING Forced air COMPLIANCE • UL60950 • FCC Part 15, Class A (EMI/ EMC) OTHER • Input connection: AMP641208-8 (8-pin MTA 156) • Output connection: AMP 1-641208-3 Custom 24 Vdc input, 4 output (CPCI compliant), 189 Watt continuous. (13-pin MTA 156); AMP 1-641208-5 (15-pin MTA 156) • Control connection: AMP 641215-9 (9-pin MTA 100) • All outputs incorporate remote voltage sense • Current limit, OVP on all outputs • DC Power OK signal via Open Collector Transistor referenced to 5 V Rtn, (Low = OK, Open Coll. = Fail) Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_C002 Central Office INPUT 48 Vdc nominal (42 – 56 Vdc) OUTPUT • 5 Vdc @ 80 Amps, 400 Watts • 12 Vdc @ 12.5 Amps, 150 Watts • -12 Vdc @ 12.5 Amps, 150 Watts TOTAL POWER 700 Watts WEIGHT 4 lbs. max. DIMENSIONS 9.2" x 11.0"(Deep) x 1.6" OPERATING TEMP. 0°C to +50°C Ambient COOLING Customer supplied rack forced air COMPLIANCE • UL60950 • FCC Part 15, Class A (EMI / EMC) OTHER • Input / Output connection: (8-pin MTA 156) • Control connection: (9-pin MTA 100) • 5 Vdc output incorporates remote voltage sense • All outputs incorporate active current share, and diode isolation for N+1 redundancy • Current limit, OVP on all outputs • Front panel: Adjustment pots for each DC output; LED for input fuse fail, & DC pwr OK; DC output test points; output enable switch • Input fuse alarm signal via Open Collector Transistor referenced to -48 V input, (Low = Fuse Open, Open Coll. = Fuse Good). Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com Custom 48 Vdc input, current share configured, triple output, 700 Watt continuous. cstmA_C003 Ground Mobile Communications INPUT 115 / 200 Vac, Three-phase, MIL-STD-704F OUTPUT 28 Vdc, MIL-STD-1275B TOTAL POWER 5,500 Watt WEIGHT 50 lbs. (max.) DIMENSIONS 16.4" x 15.9" x 7.0" OPERATING TEMP. -46°C to +49°C Ambient COOLING Internal fans COMPLIANCE MIL-STD-810 (shock & vibration) MIL-STD-461 (EMI) This high power single output AC-DC supply is housed in a rugged enclosure suitable for ground mobile environment. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_C004 Satellite Transceiver INPUT 110 / 220 Vac, 47 – 63 Hz, Autoranging OUTPUT • -5 Vdc @ 5 Watts • 12 Vdc @ 180 Watts • 8 Vdc @ 24 Watts • 15 Vdc @ 50 Watts • 24 Vdc @ 12 Watts TOTAL POWER 350 Watts WEIGHT 4 lbs. DIMENSIONS 4.0" x 2.5" x 13.75" OPERATING TEMP. -40°C to +70°C COOLING Conduction This customized low-noise five COMPLIANCE • IEC950 output power supply is designed to • UL1950 fit exactly into the host system. • FCC Part 15, Class A Universal AC input allows for • EN55022 (EMI /EMC) OTHER worldwide application. • Low noise (<25 mV p-p) • Current limit • 12 Vdc output is adjustable from 8 – 13 Vdc Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_C001 Portable Communications Equipment INPUT (AC) 85 – 264 Vac, PFC INPUT (DC) Factory-configurable, 10 – 200 Vdc OUTPUT Two factory-configurable DC outputs TOTAL POWER Up to 900 Watts WEIGHT 6.6 lbs. DIMENSIONS 10.5" x 7.0" x 1.68" OPERATING TEMP. -20°C to +70°C COOLING Internal fans COMPLIANCE • EN60950 PB1002PFCDC • CE Mark Dual-input power supply for applications requiring operation from a variety of available power sources. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_C002 Outdoor Satellite Transceiver INPUT 90 – 264 Vac, 50 / 60 Hz, PFC OUTPUT Two factory-configurable DC outputs TOTAL POWER 1,000 Watts @ 230 Vac WEIGHT 6.7 lbs. DIMENSIONS 13.5" x 6.5" x 2.0” OPERATING TEMP. -30°C to +80°C COOLING Conduction COMPLIANCE • cTÜVus PBC1002PFC • EN60950 • CE Mark LVD Dual-output, conduction-cooled • EN61000-3-2 power supply with universal input OTHER Optional output bus bars and power factor correction. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_C003 Satellite Transceiver IN PUT 115 / 230 Vac, Autoranging OUTPUT Two factory-configurable DC outputs TOTAL POWER • 800 Watts @ 115 Vac • 1,000 Watts @ 230 Vac WEIGHT 6.25 lbs. DIMENSIONS 9.0" x 7.38" x 2.5" OPERATING TEMP. -30°C to +70°C COOLING Internal fans COMPLIANCE • cTÜVus PBC1002AC • CE Mark Autoranging 115 /230 Vac input with • EN60950 up to two factory-configurable DC OTHER Outputs through Molex Mini-Fit Sr. connectors or optional bus bars. Optional finned heat sink available. outputs with total power of 1,000 W. Coldplate cooling or optional finned heat sink for convection cooling. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_C004 Cellular Base Station IN PUT 24 Vdc or 48 Vdc OUTPUT Single factory-configurable output, up to 48 Vdc TOTAL POWER 1,000 Watts WEIGHT 3.5 lbs. DIMENSIONS 13.05" x 4.14" x 1.6" OPERATING TEMP. -25°C to 55°C COOLING Internal fans COMPLIANCE EN60950 OTHER Load sharing and N+1 redundancy N+1 redundant Hot-Swap 1U power supply. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_C005 Redundant Disk Array INPUT 115 / 230 Vac; PFC OUTPUT • 5 Vdc @ 110 Watts • 12 Vdc @ 192 Watts TOTAL POWER 302 Watts WEIGHT 8 lbs. DIMENSIONS 11.0" x 4.25" x 5.5" OPERATING TEMP. -40°C to +80°C COOLING Internal fans COMPLIANCE • UL1950 • EN60950 • CISPR 22 Class B (EMI / EMC) OTHER This 302 Watt supply features • Output power good • Input power fail universal AC input and power factor • Remote voltage sense correction. Designed for a high • Remote enable / disable reliability application, two or more • Hot-Swappable supplies can be paralleled in a • 2N redundant redundant configuration. Hot-Swap capability allows replacement without powering down the entire system. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_DP001 Fault Tolerant Server INPUT 36 – 72 Vdc OUTPUT 12, 48 Vdc TOTAL POWER 1,050 Watts WEIGHT 5 lbs. DIMENSIONS 13.5" x 5.0" x 2.75" OPERATING TEMP. 0°C to +55°C COOLING Internal fan COMPLIANCE • cTÜVus • EN60950 OTHER Redundant with current sharing N+1 Redundant DC-DC power supply for high-demand fault-tolerant server. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_DP001 High-Speed Hardware Emulation System INPUT 48 Vdc OUTPUT • 1.1 V @ 800 Amps • 1.2 V @ 100 Amps • 1.8 V @ 100 Amps TOTAL POWER 1,000 Watts WEIGHT 1 lb. DIMENSIONS 11" x 7.0" x 1.0" OPERATING TEMP. 0°C to +60°C COOLING System air or system liquid V•I Chip based high-density power supply for high-performance multi-chip modules. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_DP002 Test Equipment, Semiconductor Fabrication INPUT 85 – 264 Vac, 50 /60 Hz, PFC OUTPUT Six factory-configurable DC outputs TOTAL POWER 1,500 Watts @ 230 Vac WEIGHT 14 lbs. DIMENSIONS 16.84" x 12.6" x 1.75" OPERATING TEMP. -20°C to +50°C COOLING Internal fans COMPLIANCE • EN6100-3-2 PB1506PFC • EN60950 • CE Mark LVD OTHER SEMI F47 compliant when operated at 208 Vac This low profile (1U) AC or DC input power supply offers up to six main output voltages with total power of 1.5 kW and two low power auxiliary outputs of 5 or 12 Vdc. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I001 Test Equipment, Semiconductor Fabrication INPUT (AC) • 85 – 264 Vac, 50 / 60 Hz, PFC • 180 – 264 Vac, Three-phase INPUT (DC) 250 – 425 Vdc OUTPUT Six factory-configurable DC outputs TOTAL POWER 3,600 Watts @ 230 Vac WEIGHT 15 lbs. DIMENSIONS 17" x 19" x 1.75" OPERATING TEMP. -20°C to +50°C COOLING Internal fans COMPLIANCE • EN6100-3-2 PB3606PFC • EN60950 This low profile (1U) AC or DC input • CE Mark LVD OTHER SEMI F47 compliant when operated at 208 Vac power supply offers up to six output voltages with total power of 3.6 kW. Each output can be individually enabled / disabled. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I002 Semiconductor Fabrication INPUT Three-phase, 208 Vac, PFC OUTPUT Twenty-four, individual factory-configurable DC outputs TOTAL POWER 6,000 Watts WEIGHT 45 lbs. DIMENSIONS 24" x 22" x 6.97" OPERATING TEMP. 0°C to +50°C COOLING Internal fans COMPLIANCE • SEMI F47 compliant PB1004PFC_system • EN6100-3-2 • EN60950 • CE Mark Custom chassis populated with six standard PB1004PFC power supplies. Includes customized AC and DC power distribution panel. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I003 Semiconductor Fabrication INPUT 85 – 264 Vac, PFC OUTPUT Four factory-configurable DC outputs TOTAL POWER 1000 Watts @ 230 Vac WEIGHT 5.5 lbs. DIMENSIONS 10.28" x 9.08" x 1.74" OPERATING TEMP. -20°C to +50°C COOLING Internal fans COMPLIANCE • SEMI F47 compliant when operated at 208 Vac PB1004PFC • EN6100-3-2 • EN60950 • CE Mark This universal AC input power supply has active power factor correction and is compliant to the input harmonics of EN6100-3-2. Available with up to four factoryconfigurable DC outputs, with a total power of 1 kW. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I004 Process Control Equipment INPUT 115 / 230 Vac, 50 / 60 Hz OUTPUT Three factory-configurable DC outputs TOTAL POWER 300 Watts WEIGHT 1.5 lbs. DIMENSIONS 6.7" x 3.9" x 1.4" OPERATING TEMP. -20°C to +70°C COOLING System forced air COMPLIANCE • EN60950 • cTUVus EC303AC • CE Mark LVD EuroRack 8HP three factoryconfigurable DC output power supply for industrial applications. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I005 Industrial Applications INPUT 115 / 230 Vac, 50 / 60 Hz OUTPUT Five factory-configurable DC outputs TOTAL POWER 1,000 Watts @ 230 Vac WEIGHT 6.6 lbs. DIMENSIONS 10.5" x 7.0" x 1.68" OPERATING TEMP. -20°C to +50°C COOLING Internal fans COMPLIANCE • cTÜVus PB1005AC • EN60950 • CE Mark LVD • EN55022, Class A, Conducted OTHER Rack-mount options Flexible and compact AC-DC power supply suitable for a variety of industrial applications and 19" rack installation. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I006 Manufacturing Equipment INPUT 85 – 264 Vac OUTPUT 375 Vdc TOTAL POWER 4,000 Watts @ 230 Vac WEIGHT 5 lbs. DIMENSIONS 8.5" x 7.0" x 4.75" OPERATING TEMP. -25°C to +50°C COOLING Internal fans COMPLIANCE • cTÜVus PT4001PFC • EN60950 • CE Mark LVD • EN61000-3-2 OTHER Output short-circuit protection High-power PFC front end for supplying bulk power in a variety of industrial applications. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I007 Power Substation Supervisory Controls INPUT (AC) 115 / 230 Vac, 50 / 60 Hz INPUT (DC) Factory-configurable, 36 – 400 Vdc OUTPUT Two factory-configurable DC outputs TOTAL POWER 600 Watts WEIGHT 12 lbs. DIMENSIONS 17" x 9.57" x 4.87" OPERATING TEMP. -20°C to +50°C COOLING Natural convection COMPLIANCE EN60950 OTHER Dual input redundancy RG1202ACDC Power supply designed for applications requiring very long operational life, reliability and power source redundancy. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I008 Semiconductor Manufacturing Equipment INPUT Three-phase, 208 Vac OUTPUT 12 – 24 Vdc TOTAL POWER 3,240 Watts WEIGHT 47 lbs. DIMENSIONS 14" x 17" x 5.5" OPERATING TEMP. 0°C to +45°C COOLING Internal fans COMPLIANCE EN60950 OTHER Custom AC and DC distribution panel This multi-output power supply is designed to fit into the base of large semiconductor manufacturing equipment and provides power for multiple tools requiring individual power rails. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I009 Semiconductor Manufacturing INPUT Three-phase, 208 Vac OUTPUT Thirty-two individual, factory-configurable DC outputs TOTAL POWER 7,500 Watts WEIGHT 60 lbs. DIMENSIONS 30" x 17" x 8.0" OPERATING TEMP. 0°C to +50°C COOLING Internal fans COMPLIANCE EN60950 OTHER Custom DC and AC distribution panel Custom power supply designed for semiconductor manufacturing equipment. Incorporates customer-specified input/output connectors and status monitoring functions. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I010 High-Speed Electronic Components Testing INPUT 208 / 230 Vac, PFC OUTPUT Four channels: 1 – 600 Vdc user configurable via control input TOTAL POWER 1,200 Watts WEIGHT 12 lbs. DIMENSIONS 24" x 14" x 2.5" OPERATING TEMP. 0°C to +35°C COOLING System airflow COMPLIANCE EN60950 Specialized power supply with a very wide range of output voltages configurable in real time by the host system. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I011 Industrial Control System INPUT Factory-configurable, 10 – 200 Vdc OUTPUT Five factory-configurable DC outputs TOTAL POWER Up to 1,000 Watts WEIGHT 6.6 lbs. DIMENSIONS 10.5" x 7.0" x 1.68" OPERATING TEMP. -20°C to +70°C COOLING Internal fans COMPLIANCE • EN60950 PB1005DC • CE Mark LVD OTHER Optional rack-mounting shelf, optional output bus bars This versatile five factoryconfigurable DC output power supply can operate at a variety of input voltage ranges. The form-factor is compatible with the PB1005AC family. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_I012 Sealed Lead-Acid Battery Charger INPUT 18 – 36 Vdc OUTPUT 24 Vdc Three-state lead-acid battery charger TOTAL POWER 300 Watts or 600 Watts WEIGHT 11 lbs. DIMENSIONS 9.5" x 7.0" x 5.25" OPERATING TEMP. -55°C to +55°C Ambient COOLING Convection COMPLIANCE • Water tight NEMA Class 4 • MIL-STD-461 (EMI) OTHER Three separate charging states: • High current bulk-charge state • Controlled over-charge Ruggedized water tight battery charger system designed for • Precision float-charge Military vehicle applications. Full three-state battery charger tailored for lead-acid battery technology with shorted cell detection and precision float state charging. Freedom Power Systems Cedar Park, TX Tel: 512-259-0941 freedompower.com cstmF_I001 DC MegaPAC Power Supply INPUT Factory-configurable inputs from 12 – 72 Vdc OUTPUT Up to 16 factory-configurable DC outputs TOTAL POWER Up to 1,600 Watts WEIGHT 9.25 lbs. (max.) DIMENSIONS 3.4" x 6.0" x 12.0" OPERATING TEMP. -40°C to +65°C COOLING Internal fans COMPLIANCE • CE Mark • BTR 2511 (EMI / EMC) OTHER • Soft start for limiting inrush current The DC MegaPAC is a highly flexible • Input and output voltage protection power supply that allows users to • Box-to-box paralleling capability quickly configure inputs, outputs and power to suit their application. Mission Power Solutions Oceanside, CA Tel: 760-631-6846 mpwrs.com cstmM_I001 Medical Linear Accelerator INPUT 120 Vac OUTPUT • 5 Vdc • ±15 Vdc TOTAL POWER 675 Watts WEIGHT 4 lbs. DIMENSIONS 17" x 2.5" x 4.6" (12.9r) OPERATING TEMP. 0°C to +70°C COOLING Convection COMPLIANCE • FCC Class B (EMI) • EN50081 This multi-output power supply • EN50082 (EMC) provides the voltages for the focusing control of X-ray beams for radiation oncology machines used throughout the world. Mission Power Solutions Oceanside, CA Tel: 760-631-6846 mpwrs.com cstmM_M0001 Ground Vehicle, Power Supply and Battery Charger INPUT 42 Vdc OUTPUT 14 Vdc @ 20 Amps TOTAL POWER 280 Watts WEIGHT 6.0 lbs. DIMENSIONS 5.25" x 4.375" x 4.0" COOLING Forced air, internal fan OTHER • 42 V to 14 V battery charger • Soft start for limiting inrush current and output voltage protection • Water tight enclosure A 42 V to 14 V DC-DC converter. With the enable input activated, the converter will supply a nominal voltage of 14.5 Vdc at 20°C and 280 W. Convertec Corporation Roseville, MN Tel: 651-604-0289 cstmC_T001 Hybrid Electric Vehicle INPUT 250 – 425 Vdc OUTPUT Single output, 12 – 48 Vdc TOTAL POWER Up to 3,000 Watts WEIGHT 7 lbs. DIMENSIONS 12" x 7.0" x 3.0" OPERATING TEMP. -40°C to +65°C COOLING Liquid cooled (1/4" thread or barb fittings) COMPLIANCE • FCC Class A (EMI) • MIL-STD-810 (shock & vibration) Environmentally sealed power converter for Hybrid Electric Vehicles is adaptable to the vehicle cooling system. This versatile series is configurable with Discrete Monitoring or CAN Bus communications capable of providing output voltage trimming. Aegis Power Systems Murphy, NC Tel: 828-837-4029 aegispower.com cstmA_T001 Remote Piloted Underwater Vehicle INPUT 20 – 31 Vdc OUTPUT 24 Vdc @ 8.3 Amps TOTAL POWER 199 Watts WEIGHT 1.1 lb. max. DIMENSIONS 2.4" x 2.8" x 5.3" OPERATING TEMP. -20°C to +55°C Ambient COOLING Forced air COMPLIANCE • UL60950 • FCC Part 15, Class A (EMI / EMC) OTHER • Remote /Local output sense • Optional power O.K signal Aegis Power Systems Aegis Power Murphy, NC Systems Murphy, NC Tel: 828-837-4029 Tel: 828-837-4029 aegispower.com aegispower.com Small package that takes 24 V input and provides a +24 Vdc regulated output. cstmA_T002 Hybrid Electric Vehicle INPUT Factory configurable, 100 – 425 Vdc OUTPUT Single factory-configurable output, 12 – 48 V TOTAL POWER Up to 1,800 Watts WEIGHT 8 lbs. DIMENSIONS 9.0" x 9.0" x 3.5" OPERATING TEMP. -40°C to +80°C COOLING Liquid PBC1801DC This power supply is used to convert high voltage from the vehicle’s main battery to a low voltage compatible with the vehicle’s electrical and electronic systems. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_T001 Sea Ferry Rudder Control System INPUT 24 Vdc OUTPUT 24 Vdc TOTAL POWER 5,400 Watts WEIGHT 50 lbs. DIMENSIONS 24" x 14" x 5.5" OPERATING TEMP. -20°C to +40°C COOLING Natural convection 4912 Isolated power supply for a safetycritical rudder control system. The complete power supply enclosure incorporates three redundant power supplies, each providing additional levels of triple-redundancy, including multiple redundant inputs and multiple redundant power paths. Northwest Power Integrations Milwaukie, OR Tel: 503-652-6161 npi-inc.com cstmN_T002