ZIOL2201 Single Channel IO-Link HV Line Driver with Integrated DC/DC Converter Brief Description Benefits The ZIOL2201 is a line driver/level shifter IC that provides an HV* I/O channel with a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation applications, and it is specifically designed to † support the communication standard IO-Link . The output driver is a push-pull stage that reaches an RDSon of less than 6.6Ω at all operational temperatures. The configuration is stored in an on-chip EEPROM and automatically loaded into the ZIOL2201’s control register during power-up. The ZIOL2201 also provides status information, such as overload and over-temperature. An integrated SPI interface supports access to configuration and status registers. The ZIOL2201 is fabricated in a powerful CMOS mixed-signal technology allowing supply voltages up to 40V. EEPROM read/write functionality is guaranteed within the entire operating temperature range in combination with a low-voltage 3.3V core supply. Features Configurable output current limitation: 56mA to 410mA Standard cable driver/ physical layer transceiver for IO-Link (device) Slew-rate controlled driver Wide range for configurable feature set, which is automatically loaded after power-on reset Onboard DC/DC converter ‡ IO-Link-specific WURQ detection On-chip registers and EEPROM for system configuration and status information SPI interface for accessing on-chip registers and EEPROM Digital interface: 3.3V output, 5V tolerant inputs IC temperature monitoring/diagnosis Over-current and over-temperature indication Configurable feature set Nonvolatile storage of system configuration Excellent electromagnetic compatibility (EMC) performance due to adjustable output slew rate control Low RDSon of 6.6Ω Programmable limitation of driver output current DC/DC converter on-chip EEPROM read/write functionality within entire operating temperature range Space saving 4x4mm² 24-pin QFN Available Support Evaluation Kits Application Notes Physical Characteristics Operation temperature -40 to +85 °C Supply voltage 8.0 to 36.0 V QFN 24 package 4x4mm ZIOL2201 Application Circuits sensor ZIOL2201 SIO sensor ZIOL2201 IO-L actuator ZIOL2201 IO-L Traditional PLC ZIOL24x1 ZIOL24x1 IO-Link PLC (master) sensor ZIOL2201 sensor ZIOL2201 IO-L ZIOL24x1 * HV: high voltage (maximum power supply / signal swing is 36V). † ZMDI is a member of the IO-Link Community: www.io-link.com. ‡ IO-Link device wake-up. For more information, contact ZMDI via [email protected]. © 2015 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 — August 27, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice. ZIOL2201 Single Channel IO-Link HV Line Driver with Integrated DC/DC Converter Typical Applications ZIOL2201 Overview In field applications, the ZIOL2201 acts as a universal cable driver. The ZIOL2201 can support IO-Link communications as a physicallayer transceiver (PHY) for IO-Link devices. ZIOL2201 Configuration Diagnosis Common applications: Cable Side High Voltage (HV) Signals Application Side Low Voltage (LV) Signals 24V line driver/level shifter IO-Link-compliant devices See the ZIOL2xxx IC Family Data Sheet for detailed technical information. Actuator, Sensor, or Interface to Host System Control Application Circuit Power Supply COM Power RX/TX Ch 0 Cable Single channel transceiver GND Ordering Information Product Sales Code Description ZIOL2201BI1R Single Channel IO-Link-compliant HV Line Driver, 4x4mm QFN24 13” reel ZIOL2201BI1W Single Channel IO-Link-compliant HV Line Driver, 4x4mm QFN24 7” reel IO-Link Lab Kit V2.0 #3600100858 ZIOL2401 Lab Kit for detailed laboratory evaluation: configurable IC/Communication/Controller Board, USB cable; software is available for download from the http://www.zmdi.com\io-link-tools page with a free customer login (see data sheet for details). ZIOL2401 Starter-Kit #3600100369 ZIOL2401 Starter Kit for product demonstration: USB stick, extension board, downloadable software Sales and Further Information Package www.zmdi.com [email protected] Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337 USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan Phone +81.3.6895.7410 Fax +81.3.6895.7301 Phone +886.2.2377.8189 Fax +886.2.2377.8199 Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026 © 2015 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 — August 27, 2015. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.