TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 12, 15, 2006 Product Name: SAW Filter 140 MHz SMD 19x6.5 mm TST Parts No.:TB0218A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Francis Chen Date: 12, 15, 2006 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 140 MHz MODEL NO.: TB0218A REV. NO.5 A. MAXIMUM RATING: 1. Input Power Level：10 dBm RoHS Compliant Lead free Lead-free soldering 2. Operating Temperature: -40°C to 85°C 3. Storage Temperature: -40°C to 85°C B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 °C Item Unit Min. MHz 139.915 Center frequency, Fc Minimum Insertion Loss, IL Type. 140 Max. 140.085 Note 1 dB - 7 8 - MHz - 0.6 1.5 - ns - 200 500 - 1dB Bandwidth MHz 0.4 0.47 - - 40dB Bandwidth MHz - 1.47 1.6 - Amplitude Ripple in Fc±0.12MHz,AR Group delay ripple in Fc±0.15MHz Relative attenuation (relative to min. IL) - 110 MHz ~ Fc-1MHz dB 35 41 - - Fc+1MHz ~ 170MHz dB 35 39 - - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.MEASUREMENT CIRCUIT: Input L1=39nH, L3=22nH Output L2=33nH, L4=22n D. FREQUENCY CHARACTERISTICS : Fig-1 S21 Response Horizontal: 0.5MHz/Div Vertical: 7dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Fig-2 Horizontal: 200KHz/Div Vertical: 1dB/Div Vertical: 100ns/Div E. OUTLINE DRAWING : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB FOOTPRINT G. TAPE DIMENSION 218 218 Inside Outside of of Reel Reel Unit:mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 H. MECHANICAL & ENVIRONMENT CHARACTERISTICS Test Item Shock ( Drop test ) Vibration Solderability Condition of Test Requirements random free drops 3 times from height of 1.0 meter onto hard wood. Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. immersed pad in soldering bath at 260±5°C for 5±0.5 seconds. Temperature Characteristics Specimens shall be measured within -40°C to +85°C temperature range Dry heat ( Aging test ) Temperature Duration : 125 ± 2 °C : 250 hours Cold resistance Temperature Duration : -40 ± 3 °C : 96 hours Thermal Shock Heat cycle conditions -55 C 25 C (30 min) (5 min) Cycle time : 5 times The specimens shall meet the electrical specifications 75% or more of the immersed surface shall be covered with solder The specimens shall meet the electrical specifications 85 C (30 min) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) I. Reflow Profile: Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7