Product Specifications Approval Sheet

1/7
TAI-SAW TECHNOLOGY CO., LTD.
No. 3, Industrial 2nd Rd., Ping-Chen Industrial District,
Taoyuan, 324, Taiwan, R.O.C.
TEL: 886-3-4690038
FAX: 886-3-4697532
E-mail: [email protected]
Web: www.taisaw.com
Product Specifications Approval Sheet
Product Description: Crystal Unit SMD 2.5x2.0 12.0MHz
TST Part No.: TZ2716A
Customer Part No.:
Customer signature required
Company:
Division:
Approved by :
Date:
Checked by:
Yifan Chen
Approved by:
Kelly Huang
Date:
11/19/2013
1. Customer signed back is required before TST can proceed with sample build and receive orders.
2. Orders received without customer signed back will be regarded as agreement on the specifications.
3. Any specifications changes must be approved upon by both parties and a new revision of specifications
shall be released to reflect the changes.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
FR-71S03-02
2/7
TAI-SAW TECHNOLOGY CO., LTD.
Crystal Unit SMD 2.5x2.0 12.0MHz
MODEL NO.: TZ2716A
REV. NO.: 1
Revise:
Rev.
Rev. Page Rev. Account
Date
1
N/A
11/19/13’ N/A
Initial release
TAI-SAW TECHNOLOGY CO., LTD.
Ref. No.
Revised by
Yifan Chen
TST DCC
Release document
3/7
TAI-SAW TECHNOLOGY CO., LTD.
Crystal Unit SMD 2.5x2.0 12.0MHz
MODEL NO.: TZ2716A
REV. NO.: 1
Features:




Surface Mount Hermetic Package
Excellent Reliability Performance
Good Frequency Perturbation and Stability over temperature
Ultra Miniature Package
RoHS Compliant
Lead free
Lead-free soldering
Description and Applications:
Surface mount 2.5mmx2.0mm crystal unit for use in wireless communications devices,
especially for a need of ultra miniature package for mobility.
Electrical Specifications:
TZ2716A
Specification
Nominal Frequency
12.000000 MHz
Mode of Oscillation
Fundamental
Storage Temperature Range
-40C to +85C
Operating Temperature Range
-10C to +70C
Frequency Stability over Operating
Temperature Range
+/-30 ppm (referred to the value at 25C)
Frequency Make Tolerance (FL)
+/-30 ppm @ 25C +/- 3C
Equivalent Series Resistance (ESR)
150  max
Nominal Drive Level
10uW typical and 100uW max
Shunt Capacitance (Co)
3.0 pF max
Load Capacitance (CL)
20 pF
Insulation Resistance
500 M min./DC 100V
Marking
Laser Marking
Unit Weight
9.5 +/-0.5mg
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
4/7
Mechanical Dimensions (mm):
Base 1
Base 2
Recommended Land Pattern: (unit: mm)
Marking:
Line 1: Frequency (12.0)
Line 2: TST Logo + Date Code + Product Code ( □ is TST internal tracking code, could be
a~z and A~Z)
PIN#4
PIN#3
PIN#1
PIN#2
The inner vision of PIN#1,PIN#4 side is XTAL blank mounting pad.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
5/7
Date Code Table
WK01
WK02
WK03
WK04
WK05
WK06
WK07
WK08
WK09
WK10
WK11
WK12
A
B
C
D
E
F
G
H
I
J
K
L
WK13
M
WK14
WK15
WK16
WK17
WK18
WK19
WK20
WK21
WK22
WK23
WK24
WK25
WK26
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
WK27
WK28
WK29
WK30
WK31
WK32
WK33
WK34
WK35
WK36
WK37
WK38
WK39
a
b
c
d
e
f
g
h
i
j
k
l
m
WK40
WK41
WK42
WK43
WK44
WK45
WK46
WK47
WK48
WK49
WK50
WK51
WK52
n
o
p
q
r
s
t
u
v
w
x
y
z
Product Code Table:
Reel Dimensions (mm):
Tape Dimensions (mm):
Direction of Feed
[NOTE]:
1. Unless otherwise specified tolerance on dimension +/-0.1 mm.
2. Material: conductive polystyrene with color black.
3. 10 pitch cumulative tolerance +/-0.2 mm.
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
6/7
Packing Quantity/Packing:
3K pcs maximum per reel
Reflow Profile:
Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec
2. Temperature: 217+/-5 deg C; Time: 90~100 sec
TAI-SAW TECHNOLOGY CO., LTD.
TST DCC
Release document
7/7
Reliability Specifications
Test name
Reference
standard
Test process / method
Mechanical characteristics
resistance to
Soldering heat
(IR reflow)
Temp./ Duration : 260°C /10sec ×2 times
Total time : 4min.(IR-reflow)
Vibration
Total peak amplitude : 1.5mm
Vibration frequency
: 10 to 55 Hz
Sweep period
: 1.0 minute
Vibration directions : 3 mutually perpendicular
Duration
: 2 hr / direc.
directions : 3 impacts per axis
Acceleration : 3000g's, +20/-0 %
Duration
: 0.3 ms (total 18 shocks)
Waveform : Half-sine
Solder Temperature:265±5°C
Duration time: 5±0.5 seconds.
Mechanical
Shock
Solderability
EIAJED-4701
-300(301)M(II)
MIL-STD 202F
method 201A
MIL-STD 202F
method 213C
MIL-STD 883G
method 2003
Environmental characteristics
Thermal Shock
Humidity test
Dry heat
( Aging test )
PCT test
Heat cycle conditions
-55 ℃ (30min) ←→
* cycle time : 10 times
125 ℃ (30min)
Temperature : 70 ± 2 °C
Relative humidity : 90~95%
Duration
: 96 hours
Temperature : 125 ± 2 °C
Duration
: 168 hours
2
MIL-STD 883G
method 1010.7
MIL-STD 202F
method 103B
5
Pressure: 2.06kg/cm (2.03*10 pa)
Temperature : 121 ± 2 °C
Relative humidity : 100%
Duration
: 24 hours
TAI-SAW TECHNOLOGY CO., LTD.
MIL-STD 883G
method 1008.2
condition C
EIAJED-4701-3
B-123A
TST DCC
Release document