TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 11/21/2002 Product Name: SMD Clock Oscillator 33.0 MHz TST Parts No.: TW0126A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Robert Chang Approval by: T.F. Yang / Mark Chen Date: 2002/11/21 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-03S06-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD Clock Oscillator 33.0 MHz MODEL NO.: TW0126A REV. NO.: 1 A. FEATURES: 1. Ultra small package 2. Excellent for high-density packaging. B. MAXIMUM RATING: 1. DC Voltage: 12 VDC. 2. Storage Temperature: -55 °C to +125 °C. 3. Operating Temperature:-20 °C to +70 °C. C. ELECTRICAL CHARACTERISTICS: Characteristics Units Center Frequency Frequency Stability (#note 1) Input Voltage (Operating VDD) Input Current Output Load “0” Level “1” Level Symmetry (TW/T*100%) Duty Cycle Rise Time (10%->90% VDD) Fall Time (90%->10% VDD) Enable/Disable Function MHz PPM VDC mA Package size pF VDC VDC % nSec nSec Minimum Typical Maximum -50 - 33.000 3.3+/-10% - 50 12 2.97 15 - 0.33 - 40% - 60% - 10 10 PIN 1: High or Open, PIN 3:Enable PIN 1: Low, PIN 3:Disable SMD5.0X7.0X1.4mm #Note 1: Frequency stability includes 25C tolerance, operating temperature range, aging and voltage or load change. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D.OUTLINE DRAWING: (Unit: mm) E. FREQUENCY STABILITY OVER TEMPERATURE (TYPICAL): 12 9 Frequency (PPM) 6 3 0 -3 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 -6 -9 -12 Temperature F. TEST CIRCUIT: 3 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 G. OUTPUT WAVEFORM (TYPICAL): H. SOLDERING REFLOW PROFILE: 230+/-5 C 150+/-5 C 120 Sec 10 Sec Total Time : 200 Sec Max I. MARKING: 3300WD T 0126 Where D stands for date code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 J. PACKING: 1.REEL DIMENSION (Unit: mm) 2.TAPE DIMENSION (Unit: mm) Direction of Feed 3.PACKING DIRECTION The dot or the logo of marking should be close to the hole of tape. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5