VER : C_1 update : 2015.15.15 LED Power ZQF60 SERIES 60 Watts KEY FEATURES Open Frame LED Power Supply With Constant Current & Constant Voltage (C.C+C.V mode) Dimming fuction:0~10VDC & PWM Duty Controlled Universal Input: 100-240 VAC With P.F.C. Function, PF>0.9 Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Ultra Compact Size: 4.0 x 2.0 x 1.12 Inches 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. ZQF6013.5S 3570 60W Model No. Max output wattage (W) Voltage Input Output Protection Isolation (Note2) Physical Safety EMC ZQF6028S 1400 ZQF6048S 825 ZQF6054S 700 90-264 VAC Frequency (Hz) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.8A max. (115 VAC) / 0.4A max. (230 VAC) Inrush current 50 A max. (Cold Start at 230 VAC) Leakage Current < 0.7 mA max at 240 VAC / 63 Hz Voltage (V.DC.) Constant Current Operation Voltage (max) (CC Mode) (Note3) Voltage Tolerance 13.5V 24V 28V 48V 54V 11~13.5VDC 17~ 24VDC 21~28VDC 33.5~ 48VDC 38~54VDC ±10% Current Adjustment Range (mA) (CC Mode) 3570 ~ 4200 1700 ~ 2500 1400 ~ 2100 825 ~ 1250 700 ~ 1100 Minimum Load (mA) (current curve as per page-3) 3570 1700 1400 825 700 Line Regulation (115-230) (typ.) ±4% Load Regulation (Min-Max) (typ.) ±5% Ripple & Noise (max) 4Vp-p 4.5Vp-p 5Vp-p 5Vp-p 5Vp-p 87% 89% 89% 89% Efficiency (at 230VAC.)(typ) 85% Over current protection Auto recovery Over voltage protection Zener diode clamp Short circuit protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating temperature Environment ZQF6024S 1700 500V -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >583,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 4.0 x 2.0 x 1.12 Inches Weight 165 g Cooling method Free air convection ( 101.6 x 50.8 x 28.5 mm ) Tolerance 0.5 mm Agency Approvals UL8750、IEC / EN 61347-2-13、 IEC / EN 61347-1 EMI (Conducted & Radiated Emission) EN 55015 EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : C_1 update : 2015.15.15 LED Power ZQF60 SERIES 60 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Please check the derating curve for more details. 3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific system design. 4. Please contact us for more information. 5. It's recommended to add Varistor 14S471K at L / N input side in parallel. 6. This driver is suggested for LED application only. 7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate. MECHANICAL DIMENSION ( Top View ) PIN# Single 1 AC IN (N) 2 AC IN (L) 3 +Dim 4 +DC OUT 5 -DC OUT DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : C_1 update : 2015.15.15 LED Power ZQF60 SERIES 60 Watts DIMMING CONTROL ( CC Mode ) (at 230VAC) ZQF60-13.5 4200 Output Current 4050 3900 3750 3600 3450 3300 3150 3000 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% DC Input Voltage or PWM(10V) Duty ZQF60-24S ZQF60-28S 2550 2200 2400 2050 Output Current(mA) Output Current(mA) 2700 2250 2100 1950 1800 1900 1750 1600 1450 1650 1500 1300 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% 0V or 0% or Open 1V or 10% 2V or 20% DC Input Voltage or PWM(10V) Duty 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8 or 80% 9 or 90% 10V or 100% 8V or 80% 9V or 10V or 90% 100% DC Input Voltage or PWM(10V) Duty ZQF60-48S ZQF60-54S 1325.0 1400.0 1175.0 1200.0 1100.0 1025.0 Output Current(mA) Output Current(mA) 1250.0 1300.0 1100.0 1000.0 900.0 950.0 875.0 800.0 725.0 650.0 800.0 575.0 700.0 0V or 1V or 0% or 10% Open 500.0 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% DC Input Voltage or PWM(10V) Duty http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 8 or 80% 9 or 90% 10V or 100% 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% DC Input Voltage or PWM(10v) Duty -3-