VER : B_0 update : 2012.01.20 Encapsulated DC-DC Converter SH10 SERIES 10 Watts KEY FEATURES Power Module for PCB Mountable High Efficiency and Reliability 2:1 Input Range Single and Dual Output Regulated Output Low Ripple and Noise 3-Years Product Warranty ELECTRICAL SPECIFICATIONS Model No. ( Single Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-12-3.3S 12V (9-18V) 3.3V/2500mA SH10-12-5S 12V (9-18V) 5V/2000mA SH10-12-12S 12V (9-18V) 12V/830mA SH10-12-15S 12V (9-18V) 15V/670mA SH10-12-24S 12V (9-18V) 24V/416mA Efficiency (typ.) 82% 83% 86% 86% 86% Capacitor Load (max) 2200μF 2200μF 560μF 470μF 100μF Model No. ( Single Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-24-3.3S 24V (18-36V) 3.3V/2500mA SH10-24-5S 24V (18-36V) 5V/2000mA SH10-24-12S 24V (18-36V) 12V/830mA SH10-24-15S 24V (18-36V) 15V/670mA SH10-24-24S 24V (18-36V) 24V/416mA Efficiency (typ.) 82% 85% 86% 86% 86% Capacitor Load (max) 2200μF 2200μF 560μF 470μF 100μF Model No. ( Single Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-48-3.3S 48V (36-75V) 3.3V/2500mA SH10-48-5S 48V (36-75V) 5V/2000mA SH10-48-12S 48V (36-75V) 12V/830mA SH10-48-15S 48V (36-75V) 15V/670mA SH10-48-24S 48V (36-75V) 24V/416mA Efficiency (typ.) 82% 85% 86% 86% 86% Capacitor Load (max) 2200μF 2200μF 560μF 470μF 100μF Model No. ( Single Output ) SH10-12-3.3S SH10-12-5S SH10-12-12S SH10-12-15S SH10-12-24S SH10-24-3.3S SH10-24-5S SH10-24-12S SH10-24-15S SH10-24-24S SH10-48-3.3S SH10-48-5S SH10-48-12S SH10-48-15S SH10-48-24S 12 15 24 830 670 416 ±1% ±1% ±1% 10W Max Output Wattage (W) Input Input Filter Voltage (V.DC.) Voltage Accuracy Current (mA) max Line Regulation (LL-HL) (typ.) Output Load Regulation (10-100%) (typ.) Minimum Load Ripple Noise Switching Frequency Over Power Protection Protection Short Circuit Protection Voltage Isolation Resistance Capacitance Operating Temperature Storage Temperature Case Temperature Environment Temperature Coefficient Humidity MTBF Dimension (L x W x H) Case Material Physical Weight Cooling Method π type 3.3 5 ±2% 2500 2000 ±0.5% ±3% ±1% 0% 50 mV max. 1% max. 50 mV max. 1% max. 300KHz Above 105% Rated Output Power Current limit, auto-recovery 1600 VDC. 108 ohms 1000 pF -25°C…+60°C (at Full Load) -55°C…+105°C +100°C max. ±0.02% Per°C 95% RH >800,000 h @ 25°C (MIL-HDBK-217F) 1.25 x 0.8 x 0.44 Inches ( 31.8 x 20.3 x 11.2 mm ) Tolerance ±0.5 mm Nickel-Coated Copper with Non-Conductive Base, Six-side shielded. 20 g Free-air convection 1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : B_0 update : 2012.01.20 Encapsulated DC-DC Converter SH10 SERIES 10 Watts Model No. ( Dual Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-12-5D 12V (9-18V) ±5V / ±1000mA SH10-12-12D 12V (9-18V) ±12 / ±416mA SH10-12-15D 12V (9-18V) ±15 / ±333mA Efficiency (typ.) 83% 86% 86% Capacitor Load (max) ±1200μF ±330μF ±120μF Model No. ( Dual Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-24-5D 24V (18-36V) ±5V / ±1000mA SH10-24-12D 24V (18-36V) ±12 / ±416mA SH10-24-15D 24V (18-36V) ±15 / ±333mA Efficiency (typ.) 83% 87% 86% Capacitor Load (max) ±1200μF ±470μF ±330μF Model No. ( Dual Output ) Input Voltage (V.DC.) Output Voltage (V.DC.) SH10-48-5D 48V (36-75V) ±5V / ±1000mA SH10-48-12D 48V (36-75V) ±12 / ±416mA SH10-48-15D 48V (36-75V) ±15 / ±333mA Efficiency (typ.) 82% 87% 86% Capacitor Load (max) ±1200μF ±470μF ±330μF SH10-12-5D SH10-12-12D SH10-12-15D SH10-24-5D SH10-24-12D SH10-24-15D SH10-48-5D SH10-48-12D SH10-48-15D Model No. ( Dual Output ) 10W Max Output Wattage (W) Input Input Filter Voltage (V.DC.) Voltage Accuracy Current (mA) max Line Regulation (LL-HL) (typ.) Output Load Regulation (10-100%) (typ.) Minimum Load Ripple Noise Switching Frequency Over Power Protection Protection Short Circuit Protection Voltage Isolation Resistance Capacitance Operating Temperature Storage Temperature Case Temperature Environment Temperature Coefficient Humidity MTBF Dimension (L x W x H) Case Material Physical Weight Cooling Method L-C type ±5 ±12 ±2% ±1000 ±416 ±0.5% ±1% ±1% 0% <0.2% Vout +20mV max (Vp-p) <0.5% Vout +50mV max (Vp-p) 300KHz Works over 120% of rating and recovers automatically. Current limit, auto-recovery 1600 VDC. ±15 ±333 ±1% 108 ohms 1000 pF -25°C…+60°C (at Full Load) -55°C…+105°C +100°C max. ±0.02% Per°C 95% RH >800,000 h @ 25°C (MIL-HDBK-217F) 1.25 x 0.8 x 0.44 Inches ( 31.8 x 20.3 x 11.2 mm ) Tolerance ±0.5 mm Nickel-Coated Copper with Non-Conductive Base, Six-side shielded. 20 g Free-air convection 1.All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2.Ripple & Noise are measured at 20MHz of bandwidth with 0.1UF & 47UF parallel capacitor. OUTPUT NOISE The output noise is measured with 0.1μF tantalum capacitor http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : B_0 update : 2012.01.20 Encapsulated DC-DC Converter SH10 SERIES MECHANICAL DIMENSION 10 Watts ( Top View ) BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single Dual 1 -VIN -VIN 2 -VIN -VIN 3 NO PIN COMMON 4 NC -VOUT 5 +VOUT +VOUT 6 -VOUT COMMON 7 +VIN +VIN 8 +VIN +VIN DERATING -3-