VER : B_1 update : 2015.05.15 LED Power ZQF30 SERIES 30 Watts KEY FEATURES Open Frame LED Power Supply With Constant Current & Constant Voltage (C.C+C.V mode) Dimming fuction:0~10VDC & PWM Duty Controlled Universal Input: 100-240 VAC With P.F.C. Function, PF>0.9 Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Ultra Compact Size: 4.0 x 2.0 x 1.12 Inches 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Max output wattage (W) Voltage Input Output Protection Isolation (Note2) Physical Safety EMC ZQF30-24S ZQF30-48S 31.4W 33.6W 33.6W 90-264 VAC Frequency (Hz) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.4A max. (115 VAC) / 0.2A max. (230 VAC) Inrush current 40 A max. (Cold Start at 230 VAC) Leakage Current < 0.7 mA max at 240 VAC / 63 Hz Voltage (V.DC.) 13.5V 24V 48V Constant Current Operation Voltage (max) (CC Mode) (Note3) 11~13.5VDC 18~ 24VDC 36~ 48VDC Voltage Tolerance ±10% Current Adjustment Range (mA) (CC Mode) 1700 ~ 2330 1050 ~ 1400 525 ~ 700 Minimum Load (mA) 1700 1050 525 Line Regulation (115-230) (typ.) ±4% Load Regulation (Min-Max) (typ.) ±5% Ripple & Noise (max) 2.4Vp-p 2.4Vp-p 4.8Vp-p 88% 89% Efficiency (at 230VAC.)(typ) 85% Over current protection Auto recovery Over voltage protection Zener diode clamp Short circuit protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating temperature Environment ZQF30-13.5S 500V -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >583,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 4.0 x 2.0 x 1.12 Inches Weight 165 g Cooling method Free air convection ( 101.6 x 50.8 x 28.5 mm ) Tolerance 0.5 mm Agency Approvals IEC / EN 61347-2-13、 IEC / EN 61347-1 EMI (Conducted & Radiated Emission) EN 55015 EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : B_1 update : 2015.05.15 LED Power ZQF30 SERIES 30 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Please check the derating curve for more details. 3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific system design. 4. Please contact us for more information. 5. It's recommended to add Varistor 14S471K at L / N input side in parallel. 6. This driver is suggested for LED application only. 7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate. MECHANICAL DIMENSION ( Top View ) PIN# Single 1 AC IN (N) 2 AC IN (L) 3 +Dim 4 +DC OUT 5 -DC OUT DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : B_1 update : 2015.05.15 LED Power ZQF30 SERIES 30 Watts DIMMING CONTROL ( CC Mode ) (at 230VAC) ZQF30-13.5 2350 Output Current(mA) 2275 2200 2125 2050 1975 1900 1825 1750 1675 1600 0V or 1V or 0% or 10% Open 2V or 20% 3V or 30% 4V or 5V or 6V or 40% 50% 60% 7V or 8V or 70% 80% 9V or 10V or 90% 100% DC Input Voltage or PWM(10v) Duty ZQF30-24S ZQF30-48S 1575 750.0 1425 Output Current(mA) Output Current(mA) 1500 1350 1275 1200 1125 1050 675.0 600.0 525.0 975 900 450.0 0V or 1V or 0% or 10% Open 2V or 20% 3V or 30% 4V or 5V or 6V or 40% 50% 60% 7V or 8V or 70% 80% DC Input Voltage or PWM(10v) Duty http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 9V or 10V or 90% 100% 0V or 0% or Open 1V or 10% 2V or 20% 3V or 30% 4V or 40% 5V or 50% 6V or 60% 7V or 70% 8V or 80% 9V or 10V or 90% 100% DC Input Voltage or PWM(10v) Duty -3-