VER : A_2 update : 2015.07.14 AC-DC Power Module AUC SERIES 7 Watts KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 50 / 60 Hz No-Load Watts < 0.1W Ultra Compact Size: 1.08” x 1.08” x 0.736” Inches Isolation Class II CE, CB, UL Approval 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. ( Single Output ) Max Output Wattage (W) Voltage Protection Isolation Environment Physical 7W AUC-24S 180 mA max. (115 VAC) / 110 mA max. (230 VAC) (Note 4.) Leakage Current Output 6.3W AUC-15S 50 / 60 Hz Current (Full load) Inrush Current AUC-12S 90-264 VAC or 120-370 VDC, “ N ” to DC “ + “ ; “L ” to DC “ - “ Frequency (Hz) Input AUC-5S 20 A max. (115 VAC) / 40 A max. (230 VAC) 0.25 mA max. (at <240 VAC). External Fuse (mandatory) 2 A slow blow type Voltage (V.DC.) 5V Voltage Accuracy ±2% Current (mA) max 1260 Line Regulation (LL-HL) (typ.) ±0.5% Load Regulation (10-100%) (typ.) ±1%. Minimum Load 0% Maximum Capacitive Load 3300uF Ripple <100mV (Vp-p) <200mV (Vp-p) Noise <150mV (Vp-p) <200mV (Vp-p) Efficiency (at 230 VAC) 77% Hold-up Time (at 230 VAC) 30 ms min. Over Power Protection Hiccup technique, auto-recovery Over Voltage Protection Zener diode clamp 12V 15V 24V 583 466 292 1000uF 470uF 68uF 80% 80% Short Circuit Protection Hiccup mode, indefinite (automatic recovery) Input-Output (V.AC) 3000V Operating Temperature -40°C…+70°C ( with derating ) Storage Temperature -40°C…+85°C Temperature Coefficient ±0.02%/°C Humidity 95% RH MTBF >500,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 1.08 x 1.08 x 0.736 Inches Case Material Plastic resin (flammability to UL 94V-0) Weight 26 g Cooling Method Free air convection Safety Agency Approvals CE, UL, cUL EMC EMI (Conducted & Radiated Emission) EMS (Noise Immunity) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 80% ( 27.4 x 27.4 x 18.7 mm ) Tolerance 0.5 mm EN 55022 class B EN 55024 -1- VER : A_2 update : 2015.07.14 AC-DC Power Module AUC SERIES 7 Watts NOTE 1. All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. 2. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 3. It's necessary Varistor 14S471K at L / N input side in parallel. 4. It's necessary 10R / 15φ thermistor at L input side in series connection. 5. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw OUTPUT NOISE The output noise is measured with 47F tantalum capacitor and 0.1F ceramic capacitor across output. BLOCK DIAGRAM MECHANICAL DIMENSION DERATING ( Top View ) PIN# Single 1 AC IN (N) 2 AC IN (L) 3 +DC OUT 4 -DC OUT Customer is recommended to reserve pad points of 1.0mm in diameter for AC IN (L) and AC IN (N) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2-