VER : B_2 update : 2015.05.15 LED Power PLF30 SERIES 30 Watts KEY FEATURES Fully Isolated Plastic Case with IP67 Level Constant Current With Constant Current & Constant Voltage (C.C+C.V mode) Universal Input: 100-240 VAC With P.F.C. Function, PF>0.9 Free Air Convection Protections: Over Load / Over Voltage / Short Circuit High Reliability & Double Layered PCB Ultra Compact Size: 4.92 x 2.36 x 1.38 Inches 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Max output wattage (W) Voltage Input Output Protection Isolation (Note2) Physical Safety EMC PLF30-24S PLF30-48S 28.4W 33.6W 33.6W 90-264 VAC Frequency (Hz) 50 / 60 Hz Power factor PF>0.9 at Full load (115 VAC / 230 VAC) Current (Full load) 0.8A max. (115 VAC) / 0.4A max. (230 VAC) Inrush current 40 A max. (Cold Start at 230 VAC) Leakage Current < 0.7 mA max at 240 VAC / 63 Hz Voltage (V.DC.) 13.5V 24V 48V Constant Current Operation Voltage (max) (CC Mode) (Note3) 11~13.5VDC 17~ 24VDC 33.5~ 48VDC Voltage Tolerance ±10% Current (mA) (CC Mode) (at 230VAC.) 2100 1400 700 Minimum Load (mA) 1900 1050 525 Line Regulation (115-230VAC) (typ.) ±4% Load Regulation (typ.) ±5% Ripple & Noise (max) 2.4Vp-p 2.4Vp-p 4.8Vp-p Efficiency (at 230VAC.)(typ) 85% 88% 89% Over current protection Auto recovery Over voltage protection Zener diode clamp Short circuit protection Auto recovery Input-Output (V.AC) 3750V Input-FG (V.AC) 1880V Output-FG .(V.AC) Operating temperature Environment PLF30-13.5S 500V -30°C…+70°C (with derating) Storage temperature -40°C…+85°C Temperature coefficient 0.02%/°C Humidity 95% RH MTBF >583,000 h @ 25°C (MIL-HDBK-217F) Dimension (L x W x H) 4.92 x 2.36 x 1.38 Inches (125.0 x 60.0 x 35.0 mm) Tolerance 0.5 mm Weight 410 g Cooling method Free air convection Agency Approvals IEC / EN 61347-2-13、 IEC / EN 61347-1 EMI (Conducted & Radiated Emission) EN 55015 EMS (Noise Immunity) EN 61547 Harmonic Current EN 61000-3-2(at Full Load)、EN 61000-3-3 http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : B_2 update : 2015.05.15 LED Power PLF30 SERIES 30 Watts Note: 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Please check the derating curve for more details. 3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements for some specific system design. 4. Please contact us for more information. 5. It's recommended to add Varistor 14S471K at L / N input side in parallel. 6. This driver is suggested for LED application only. 7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate. MECHANICAL DIMENSION ( Top View ) DERATING BLOCK DIAGRAM http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2-