ZQF30(R)

VER : B_1
update : 2015.05.15
LED Power
ZQF30(R) SERIES
30 Watts
KEY FEATURES
 Open Frame LED Power Supply
 With Constant Current & Constant Voltage (C.C+C.V mode)
 Universal Input: 100-240 VAC
 With P.F.C. Function, PF>0.9
 Free Air Convection
 Protections: Over Load / Over Voltage / Short Circuit
 High Reliability & Double Layered PCB
 Ultra Compact Size: 4.0 x 2.0 x 1.12 Inches
 3-Year Product Warranty
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
Max output wattage
(W)
Voltage
Input
Output
Protection
Isolation
Environment
Physical
(Note2)
ZQF30(R)-13.5S
ZQF30(R)-24S
ZQF30(R)-48S
31.4W
33.6W
33.6W
90-264 VAC
Frequency (Hz)
50 / 60 Hz
Power factor
PF>0.9 at Full load (115 VAC / 230 VAC)
Current (Full load)
0.4A max. (115 VAC) / 0.2A max. (230 VAC)
Inrush current
40 A max. (Cold Start at 230 VAC)
Leakage Current
< 0.7 mA max at 240 VAC / 63 Hz
Voltage (V.DC.)
13.5V
24V
48V
Constant Current Operation Voltage (max) (CC Mode) (Note3)
11~13.5VDC
18~ 24VDC
36~ 48VDC
Voltage Tolerance
±10%
Preset Current (mA) (CC Mode)
2100
1400
700
Current Adjustment Range (mA) (CC Mode)
1700 ~ 2330
1050 ~ 1400
525 ~ 700
Minimum Load (mA)
1700
1050
525
Line Regulation (115-230VAC) (typ.)
±4%
Load Regulation (Min-Max) (typ.)
±5%
Ripple & Noise (max)
2.4Vp-p
2.4Vp-p
4.8Vp-p
Efficiency (at 230VAC.)(typ)
85%
88%
89%
Over current protection
Auto recovery
Over voltage protection
Zener diode clamp
Short circuit protection
Auto recovery
Input-Output (V.AC)
3750V
Input-FG
(V.AC)
1880V
Output-FG
.(V.AC)
500V
Operating temperature
-30°C…+70°C (with derating)
Storage temperature
-40°C…+85°C
Temperature coefficient
0.02%/°C
Humidity
95% RH
MTBF
>583,000 h @ 25°C (MIL-HDBK-217F)
Dimension (L x W x H)
4.0 x 2.0 x 1.12 Inches
Weight
165 g
( 101.6 x 50.8 x 28.5 mm ) Tolerance 0.5 mm
Cooling method
Free air convection
Safety
Agency Approvals
IEC / EN 61347-2-13、 IEC / EN 61347-1
EMC
EMI
(Conducted & Radiated Emission)
EMS (Noise Immunity)
EN 61547
Harmonic Current
EN 61000-3-2(at Full Load)、EN 61000-3-3
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
EN 55015
-1-
VER : B_1
update : 2015.05.15
LED Power
ZQF30(R) SERIES
30 Watts
Note:
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. Please check the derating curve for more details.
3. Input Voltage=115 or 230 VAC。This is the suitable operation region for LED related application.but please reconfirm special electrical requirements
for some specific system design.
4. Please contact us for more information.
5. It's recommended to add Varistor 14S471K at L / N input side in parallel.
6. This driver is suggested for LED application only.
7. Direct connection to LEDs is suggested. Connecting additional drivers would not be appropriate.
MECHANICAL DIMENSION
( Top View )
PIN#
Single
1
AC IN (N)
2
AC IN (L)
3
NC
4
+DC OUT
5
-DC OUT
DERATING
BLOCK DIAGRAM
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-2-