Application Note 1 Amp Rectifiers in SMD Rectifiers with 1 Amp in SMD are widely used for 50/60Hz input rectification in all kind of electronics. This note deals with optimized solutions for every need. Low Cost SMA 2.5 2.2 ± 0.2 0.5 0.5 Type Typ Type Typ 2.7 ± 0.2 ±0.2 ± 0.2 2.7 0.4 1.8±0.2 0.15 5.0 0.4 1± 0.3 Type Typ 4.2± 0.3 Voltage VRRM ± 0.2 0.1± 0.1 ± 0.4 1.1 3.5 1.3±0.15 3.7±0.2 Type Code 5 ± 0.7 ±0.2 0.1 -0.3 2.8 0.22 2.2± 0.2 1.6 0.6 ±0.25 DO-213AB / Melf 2.1± 0.2 5.3 Drawing DO-214AC / SMA ± 0.4 ±0.1 DO-213AA / MiniMelf 1.5 SOD-123FL 1.5 Package 4.5 ± 0.3 50V SL1A GL1A M1 S1A SM4001 100V SL1B GL1B M2 S1B SM4002 200V SL1D GL1D M3 S1D SM4003 400V SL1G GL1G M4 S1G SM4004 600V SL1J GL1J M5 S1J SM4005 800V SL1K GL1K M6 S1K SM4006 1000V SL1M GL1M M7 S1M SM4007 1300V - - - S1T SM513 S1W SM516 (high runner) 1600V NEW - NEW - - 1800V - - - S1X SM518 2000V - - - S1Y SM2000 VF < 1.1V at IF = 1A VF < 1.2/1.3V at 1A VF < 1.1V at IF = 1A VF < 1.1V at IF = 1A VF < 1.1V at IF = 1A 27/30A (10ms/8.3ms) 27/30A (10ms/8.3ms) 27/30A (10ms/8.3ms) 30/32A (10ms/8.3ms) 40/44A (10ms/8.3ms) Wave, Reflow Wave Wave, Reflow Wave, Reflow Wave Advantages Very small package outline Replaces devices in SOD-87 Low Cost Available up to 2000V Highest forward surge capabiltiy Why to buy from Diotec? Offered in halogen-free package Over 15 years of experience with this package Known Brand Only supplier which offers up to 2000V Up to 2000V, >20 years of experience Forward voltage drop Forward surge IFSM Recommended Solder Method © Diotec Semiconductor AG http://www.diotec.com/ 2013-01-11