Data Sheet Kaynes Component Wireless Module KT1010 Kaynes Component Wireless Modules Bluetooth Qualified KT1010 (Bluetooth Core Specification Version 4.1(Bluetooth low Energy Single Mode)) Overview D “Blank” Module: User can Develop Own Unique Application Codes D Based on CSR1010 SoC D 128KB Memory: 64KB RAM and 64KB ROM D Bluetooth® v4.1 Specification D Support for Bluetooth v4.1 Specification host D Stack Including ATT, GATT, SMP, L2CAP, GAP D RSSI Monitoring for Proximity Applications D <600nA Current Consumption in Dormant Mode D Switch-Mode Power Supply D Programmable General Purpose PIO controller Bluetooth Smart Module Product Features Applications D 10-bit ADC, 12 Digital PIOs D Sports and Fitness D 3 Analogue AIOs D Healthcare D UART, I²C / SPI for EEPROM / D Home Entertainment Flash memory ICs and Peripherals D Office and Mobile Accessories D Debug SPI D Automotive D 4 PWM Modules D Remote Control D Smart Watches D Human Interface Devices (HID) Item Specification Part Number KT1010 Antenna Embedded (Patterned Antenna) Bluetooth Technology Conforms to Bluetooth Core Specification Version 4.1 (Single Mode Low Energy Radio) Transmit Power Plus 7.5 dBm (SoC) Receiver Sensitivity -92.5 dBm (SoC) Crystal Oscillator Embedded(32khz and 16mhz Crystal or System Clock) Power Supply 1.8 V To 3.6 V (Corresponds to Ldo Mode, Dc/dc Converter Mode, Low Voltage Mode) Power Consumption Average Units Bluetooth BLE function – Dormant Mode(Chip) 600 nA Bluetooth BLE function – Sleep Mode(Chip) 5 uA Bluetooth BLE function – Peak (TX / RX)(Chip) 16 mA Operating Temperature -25 Deg.c To +75 Deg.c (No Condensation) Dimensions 22mm X 15.25mm X 2.7mm Mounting Method SMD Certifications Recommended Layout Pattern: 15.25 J* 22 1 11 12 Pin Configuration Pin Name Pin No. Pin Name 1 VDD_PAD 12 2 GND 13 AIO_2 3 PIO_8 / DEGUG_MISO 14 AIO_1 4 PIO_9 15 AIO_0 5 PIO_10 16 PIO_0 / UART_TX 6 PIO_11 17 PIO_1 / UART_RX 7 SPI_PIO# 18 PIO_3 / SF_DIN 8 I2C_SCL / SF_CLK 19 PIO_4 / SF_CS# 9 I2C_SDA / SF_DOUT 20 IPIO_5 / DEBUG_CLK 10 VDD_BAT 21 PIO_6 / DEBUG_CS 11 GND 22 PIO_7 / DEBUG_MOSI Ordering Information Sl.No. Part Number Description 1 KT1010 KT1010-EVK Module 2 Base Board For support: http://kemsys.com/p-kt1010.html For any further enquiry: [email protected] WAKE 0.64 1.27 22.00 0.91 J* 0.50 Pin No. 1.78 1.78 1.27 0.00 1.47 2.74 4.01 5.28 6.55 7.82 9.09 10.36 11.63 12.90 14.17